1 /*
2  *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <errno.h>
10 #include <fdtdec.h>
11 #include <libfdt.h>
12 #include <altera.h>
13 #include <miiphy.h>
14 #include <netdev.h>
15 #include <watchdog.h>
16 #include <asm/arch/misc.h>
17 #include <asm/arch/reset_manager.h>
18 #include <asm/arch/scan_manager.h>
19 #include <asm/arch/sdram.h>
20 #include <asm/arch/system_manager.h>
21 #include <asm/arch/nic301.h>
22 #include <asm/arch/scu.h>
23 #include <asm/pl310.h>
24 
25 #include <dt-bindings/reset/altr,rst-mgr.h>
26 
27 DECLARE_GLOBAL_DATA_PTR;
28 
29 static struct pl310_regs *const pl310 =
30 	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
31 static struct socfpga_system_manager *sysmgr_regs =
32 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
33 static struct socfpga_reset_manager *reset_manager_base =
34 	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
35 static struct nic301_registers *nic301_regs =
36 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
37 static struct scu_registers *scu_regs =
38 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
39 static struct socfpga_sdr_ctrl *sdr_ctrl =
40 	(struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
41 
42 /*
43  * DesignWare Ethernet initialization
44  */
45 #ifdef CONFIG_ETH_DESIGNWARE
46 void dwmac_deassert_reset(const unsigned int of_reset_id,
47 				 const u32 phymode)
48 {
49 	u32 physhift, reset;
50 
51 	if (of_reset_id == EMAC0_RESET) {
52 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
53 		reset = SOCFPGA_RESET(EMAC0);
54 	} else if (of_reset_id == EMAC1_RESET) {
55 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
56 		reset = SOCFPGA_RESET(EMAC1);
57 	} else {
58 		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
59 		return;
60 	}
61 
62 	/* configure to PHY interface select choosed */
63 	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
64 			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
65 			phymode << physhift);
66 
67 	/* Release the EMAC controller from reset */
68 	socfpga_per_reset(reset, 0);
69 }
70 
71 static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
72 {
73 	if (!phymode)
74 		return -EINVAL;
75 
76 	if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
77 		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
78 		return 0;
79 	}
80 
81 	if (!strcmp(phymode, "rgmii")) {
82 		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
83 		return 0;
84 	}
85 
86 	if (!strcmp(phymode, "rmii")) {
87 		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
88 		return 0;
89 	}
90 
91 	return -EINVAL;
92 }
93 
94 static int socfpga_eth_reset(void)
95 {
96 	const void *fdt = gd->fdt_blob;
97 	struct fdtdec_phandle_args args;
98 	const char *phy_mode;
99 	u32 phy_modereg;
100 	int nodes[2];	/* Max. two GMACs */
101 	int ret, count;
102 	int i, node;
103 
104 	/* Put both GMACs into RESET state. */
105 	socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
106 	socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
107 
108 	count = fdtdec_find_aliases_for_id(fdt, "ethernet",
109 					   COMPAT_ALTERA_SOCFPGA_DWMAC,
110 					   nodes, ARRAY_SIZE(nodes));
111 	for (i = 0; i < count; i++) {
112 		node = nodes[i];
113 		if (node <= 0)
114 			continue;
115 
116 		ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
117 						     "#reset-cells", 1, 0,
118 						     &args);
119 		if (ret || (args.args_count != 1)) {
120 			debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
121 			continue;
122 		}
123 
124 		phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
125 		ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
126 		if (ret) {
127 			debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
128 			continue;
129 		}
130 
131 		dwmac_deassert_reset(args.args[0], phy_modereg);
132 	}
133 
134 	return 0;
135 }
136 #else
137 static int socfpga_eth_reset(void)
138 {
139 	return 0;
140 };
141 #endif
142 
143 static const struct {
144 	const u16	pn;
145 	const char	*name;
146 	const char	*var;
147 } const socfpga_fpga_model[] = {
148 	/* Cyclone V E */
149 	{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
150 	{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
151 	{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
152 	{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
153 	{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
154 	/* Cyclone V GX/GT */
155 	{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
156 	{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
157 	{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
158 	{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
159 	{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
160 	/* Cyclone V SE/SX/ST */
161 	{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
162 	{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
163 	{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
164 	{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
165 	/* Arria V */
166 	{ 0x2d03, "Arria V, D5", "av_d5" },
167 };
168 
169 static int socfpga_fpga_id(const bool print_id)
170 {
171 	const u32 altera_mi = 0x6e;
172 	const u32 id = scan_mgr_get_fpga_id();
173 
174 	const u32 lsb = id & 0x00000001;
175 	const u32 mi = (id >> 1) & 0x000007ff;
176 	const u32 pn = (id >> 12) & 0x0000ffff;
177 	const u32 version = (id >> 28) & 0x0000000f;
178 	int i;
179 
180 	if ((mi != altera_mi) || (lsb != 1)) {
181 		printf("FPGA:  Not Altera chip ID\n");
182 		return -EINVAL;
183 	}
184 
185 	for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
186 		if (pn == socfpga_fpga_model[i].pn)
187 			break;
188 
189 	if (i == ARRAY_SIZE(socfpga_fpga_model)) {
190 		printf("FPGA:  Unknown Altera chip, ID 0x%08x\n", id);
191 		return -EINVAL;
192 	}
193 
194 	if (print_id)
195 		printf("FPGA:  Altera %s, version 0x%01x\n",
196 		       socfpga_fpga_model[i].name, version);
197 	return i;
198 }
199 
200 /*
201  * Print CPU information
202  */
203 #if defined(CONFIG_DISPLAY_CPUINFO)
204 int print_cpuinfo(void)
205 {
206 	const u32 bsel =
207 		SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
208 
209 	puts("CPU:   Altera SoCFPGA Platform\n");
210 	socfpga_fpga_id(1);
211 
212 	printf("BOOT:  %s\n", bsel_str[bsel].name);
213 	return 0;
214 }
215 #endif
216 
217 #ifdef CONFIG_ARCH_MISC_INIT
218 int arch_misc_init(void)
219 {
220 	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
221 	const int fpga_id = socfpga_fpga_id(0);
222 	env_set("bootmode", bsel_str[bsel].mode);
223 	if (fpga_id >= 0)
224 		env_set("fpgatype", socfpga_fpga_model[fpga_id].var);
225 	return socfpga_eth_reset();
226 }
227 #endif
228 
229 /*
230  * Convert all NIC-301 AMBA slaves from secure to non-secure
231  */
232 static void socfpga_nic301_slave_ns(void)
233 {
234 	writel(0x1, &nic301_regs->lwhps2fpgaregs);
235 	writel(0x1, &nic301_regs->hps2fpgaregs);
236 	writel(0x1, &nic301_regs->acp);
237 	writel(0x1, &nic301_regs->rom);
238 	writel(0x1, &nic301_regs->ocram);
239 	writel(0x1, &nic301_regs->sdrdata);
240 }
241 
242 static u32 iswgrp_handoff[8];
243 
244 int arch_early_init_r(void)
245 {
246 	int i;
247 
248 	/*
249 	 * Write magic value into magic register to unlock support for
250 	 * issuing warm reset. The ancient kernel code expects this
251 	 * value to be written into the register by the bootloader, so
252 	 * to support that old code, we write it here instead of in the
253 	 * reset_cpu() function just before resetting the CPU.
254 	 */
255 	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
256 
257 	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
258 		iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
259 
260 	socfpga_bridges_reset(1);
261 
262 	socfpga_nic301_slave_ns();
263 
264 	/*
265 	 * Private components security:
266 	 * U-Boot : configure private timer, global timer and cpu component
267 	 * access as non secure for kernel stage (as required by Linux)
268 	 */
269 	setbits_le32(&scu_regs->sacr, 0xfff);
270 
271 	/* Configure the L2 controller to make SDRAM start at 0 */
272 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
273 	writel(0x2, &nic301_regs->remap);
274 #else
275 	writel(0x1, &nic301_regs->remap);	/* remap.mpuzero */
276 	writel(0x1, &pl310->pl310_addr_filter_start);
277 #endif
278 
279 	/* Add device descriptor to FPGA device table */
280 	socfpga_fpga_add();
281 
282 #ifdef CONFIG_DESIGNWARE_SPI
283 	/* Get Designware SPI controller out of reset */
284 	socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
285 	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
286 #endif
287 
288 #ifdef CONFIG_NAND_DENALI
289 	socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
290 #endif
291 
292 	return 0;
293 }
294 
295 static void socfpga_sdram_apply_static_cfg(void)
296 {
297 	const u32 applymask = 0x8;
298 	u32 val = readl(&sdr_ctrl->static_cfg) | applymask;
299 
300 	/*
301 	 * SDRAM staticcfg register specific:
302 	 * When applying the register setting, the CPU must not access
303 	 * SDRAM. Luckily for us, we can abuse i-cache here to help us
304 	 * circumvent the SDRAM access issue. The idea is to make sure
305 	 * that the code is in one full i-cache line by branching past
306 	 * it and back. Once it is in the i-cache, we execute the core
307 	 * of the code and apply the register settings.
308 	 *
309 	 * The code below uses 7 instructions, while the Cortex-A9 has
310 	 * 32-byte cachelines, thus the limit is 8 instructions total.
311 	 */
312 	asm volatile(
313 		".align	5			\n"
314 		"	b	2f		\n"
315 		"1:	str	%0,	[%1]	\n"
316 		"	dsb			\n"
317 		"	isb			\n"
318 		"	b	3f		\n"
319 		"2:	b	1b		\n"
320 		"3:	nop			\n"
321 	: : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc");
322 }
323 
324 int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
325 {
326 	if (argc != 2)
327 		return CMD_RET_USAGE;
328 
329 	argv++;
330 
331 	switch (*argv[0]) {
332 	case 'e':	/* Enable */
333 		writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
334 		socfpga_sdram_apply_static_cfg();
335 		writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
336 		writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
337 		writel(iswgrp_handoff[1], &nic301_regs->remap);
338 		break;
339 	case 'd':	/* Disable */
340 		writel(0, &sysmgr_regs->fpgaintfgrp_module);
341 		writel(0, &sdr_ctrl->fpgaport_rst);
342 		socfpga_sdram_apply_static_cfg();
343 		writel(0, &reset_manager_base->brg_mod_reset);
344 		writel(1, &nic301_regs->remap);
345 		break;
346 	default:
347 		return CMD_RET_USAGE;
348 	}
349 
350 	return 0;
351 }
352 
353 U_BOOT_CMD(
354 	bridge, 2, 1, do_bridge,
355 	"SoCFPGA HPS FPGA bridge control",
356 	"enable  - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
357 	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
358 	""
359 );
360