1 /* SPDX-License-Identifier: GPL-2.0 2 * 3 * Copyright (C) 2017-2018 Intel Corporation <www.intel.com> 4 * 5 */ 6 7 #ifndef _MAILBOX_S10_H_ 8 #define _MAILBOX_S10_H_ 9 10 /* user define Uboot ID */ 11 #define MBOX_CLIENT_ID_UBOOT 0xB 12 #define MBOX_ID_UBOOT 0x1 13 14 #define MBOX_CMD_DIRECT 0 15 #define MBOX_CMD_INDIRECT 1 16 17 #define MBOX_MAX_CMD_INDEX 2047 18 #define MBOX_CMD_BUFFER_SIZE 32 19 #define MBOX_RESP_BUFFER_SIZE 16 20 21 #define MBOX_HDR_CMD_LSB 0 22 #define MBOX_HDR_CMD_MSK (BIT(11) - 1) 23 #define MBOX_HDR_I_LSB 11 24 #define MBOX_HDR_I_MSK BIT(11) 25 #define MBOX_HDR_LEN_LSB 12 26 #define MBOX_HDR_LEN_MSK 0x007FF000 27 #define MBOX_HDR_ID_LSB 24 28 #define MBOX_HDR_ID_MSK 0x0F000000 29 #define MBOX_HDR_CLIENT_LSB 28 30 #define MBOX_HDR_CLIENT_MSK 0xF0000000 31 32 /* Interrupt flags */ 33 #define MBOX_FLAGS_INT_COE BIT(0) /* COUT update interrupt enable */ 34 #define MBOX_FLAGS_INT_RIE BIT(1) /* RIN update interrupt enable */ 35 #define MBOX_FLAGS_INT_UAE BIT(8) /* Urgent ACK interrupt enable */ 36 #define MBOX_ALL_INTRS (MBOX_FLAGS_INT_COE | \ 37 MBOX_FLAGS_INT_RIE | \ 38 MBOX_FLAGS_INT_UAE) 39 40 /* Status */ 41 #define MBOX_STATUS_UA_MSK BIT(8) 42 43 #define MBOX_CMD_HEADER(client, id, len, indirect, cmd) \ 44 ((((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \ 45 (((indirect) << MBOX_HDR_I_LSB) & MBOX_HDR_I_MSK) | \ 46 (((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK) | \ 47 (((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK) | \ 48 (((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK)) 49 50 #define MBOX_RESP_ERR_GET(resp) \ 51 (((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB) 52 #define MBOX_RESP_LEN_GET(resp) \ 53 (((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB) 54 #define MBOX_RESP_ID_GET(resp) \ 55 (((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB) 56 #define MBOX_RESP_CLIENT_GET(resp) \ 57 (((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB) 58 59 /* Response error list */ 60 enum ALT_SDM_MBOX_RESP_CODE { 61 /* CMD completed successfully, but check resp ARGS for any errors */ 62 MBOX_RESP_STATOK = 0, 63 /* CMD is incorrectly formatted in some way */ 64 MBOX_RESP_INVALID_COMMAND = 1, 65 /* BootROM Command code not undesrtood */ 66 MBOX_RESP_UNKNOWN_BR = 2, 67 /* CMD code not recognized by firmware */ 68 MBOX_RESP_UNKNOWN = 3, 69 /* Indicates that the device is not configured */ 70 MBOX_RESP_NOT_CONFIGURED = 256, 71 /* Indicates that the device is busy */ 72 MBOX_RESP_DEVICE_BUSY = 0x1FF, 73 /* Indicates that there is no valid response available */ 74 MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF, 75 /* General Error */ 76 MBOX_RESP_ERROR = 0x3FF, 77 }; 78 79 /* Mailbox command list */ 80 #define MBOX_RESTART 2 81 #define MBOX_CONFIG_STATUS 4 82 #define MBOX_RECONFIG 6 83 #define MBOX_RECONFIG_MSEL 7 84 #define MBOX_RECONFIG_DATA 8 85 #define MBOX_RECONFIG_STATUS 9 86 #define MBOX_QSPI_OPEN 50 87 #define MBOX_QSPI_CLOSE 51 88 #define MBOX_QSPI_DIRECT 59 89 #define MBOX_REBOOT_HPS 71 90 91 /* Mailbox registers */ 92 #define MBOX_CIN 0 /* command valid offset */ 93 #define MBOX_ROUT 4 /* response output offset */ 94 #define MBOX_URG 8 /* urgent command */ 95 #define MBOX_FLAGS 0x0c /* interrupt enables */ 96 #define MBOX_COUT 0x20 /* command free offset */ 97 #define MBOX_RIN 0x24 /* respond valid offset */ 98 #define MBOX_STATUS 0x2c /* mailbox status */ 99 #define MBOX_CMD_BUF 0x40 /* circular command buffer */ 100 #define MBOX_RESP_BUF 0xc0 /* circular response buffer */ 101 #define MBOX_DOORBELL_TO_SDM 0x400 /* Doorbell to SDM */ 102 #define MBOX_DOORBELL_FROM_SDM 0x480 /* Doorbell from SDM */ 103 104 /* Status and bit information returned by RECONFIG_STATUS */ 105 #define RECONFIG_STATUS_RESPONSE_LEN 6 106 #define RECONFIG_STATUS_STATE 0 107 #define RECONFIG_STATUS_PIN_STATUS 2 108 #define RECONFIG_STATUS_SOFTFUNC_STATUS 3 109 110 #define MBOX_CFGSTAT_STATE_IDLE 0x00000000 111 #define MBOX_CFGSTAT_STATE_CONFIG 0x10000000 112 #define MBOX_CFGSTAT_STATE_FAILACK 0x08000000 113 #define MBOX_CFGSTAT_STATE_ERROR_INVALID 0xf0000001 114 #define MBOX_CFGSTAT_STATE_ERROR_CORRUPT 0xf0000002 115 #define MBOX_CFGSTAT_STATE_ERROR_AUTH 0xf0000003 116 #define MBOX_CFGSTAT_STATE_ERROR_CORE_IO 0xf0000004 117 #define MBOX_CFGSTAT_STATE_ERROR_HARDWARE 0xf0000005 118 #define MBOX_CFGSTAT_STATE_ERROR_FAKE 0xf0000006 119 #define MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO 0xf0000007 120 #define MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR 0xf0000008 121 122 #define RCF_SOFTFUNC_STATUS_CONF_DONE BIT(0) 123 #define RCF_SOFTFUNC_STATUS_INIT_DONE BIT(1) 124 #define RCF_SOFTFUNC_STATUS_SEU_ERROR BIT(3) 125 #define RCF_PIN_STATUS_NSTATUS BIT(31) 126 127 int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent, 128 u32 *resp_buf_len, u32 *resp_buf); 129 int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, 130 u8 urgent, u32 *resp_buf_len, u32 *resp_buf); 131 int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg); 132 int mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg); 133 int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len); 134 int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len); 135 int mbox_init(void); 136 137 #ifdef CONFIG_CADENCE_QSPI 138 int mbox_qspi_close(void); 139 int mbox_qspi_open(void); 140 #endif 141 142 int mbox_reset_cold(void); 143 144 #endif /* _MAILBOX_S10_H_ */ 145