xref: /openbmc/u-boot/arch/arm/mach-socfpga/board.c (revision 2ae23a28)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Altera SoCFPGA common board code
4  *
5  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
6  */
7 
8 #include <common.h>
9 #include <errno.h>
10 #include <fdtdec.h>
11 #include <asm/arch/reset_manager.h>
12 #include <asm/arch/clock_manager.h>
13 #include <asm/arch/misc.h>
14 #include <asm/io.h>
15 
16 #include <usb.h>
17 #include <usb/dwc2_udc.h>
18 
19 DECLARE_GLOBAL_DATA_PTR;
20 
21 void s_init(void) {
22 #ifndef CONFIG_ARM64
23 	/*
24 	 * Preconfigure ACTLR and CPACR, make sure Write Full Line of Zeroes
25 	 * is disabled in ACTLR.
26 	 * This is optional on CycloneV / ArriaV.
27 	 * This is mandatory on Arria10, otherwise Linux refuses to boot.
28 	 */
29 	asm volatile(
30 		"mcr p15, 0, %0, c1, c0, 1\n"
31 		"mcr p15, 0, %0, c1, c0, 2\n"
32 		"isb\n"
33 		"dsb\n"
34 	::"r"(0x0));
35 #endif
36 }
37 
38 /*
39  * Miscellaneous platform dependent initialisations
40  */
41 int board_init(void)
42 {
43 	/* Address of boot parameters for ATAG (if ATAG is used) */
44 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
45 
46 #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
47 	/* configuring the clock based on handoff */
48 	cm_basic_init(gd->fdt_blob);
49 
50 	/* Add device descriptor to FPGA device table */
51 	socfpga_fpga_add();
52 #endif
53 
54 	return 0;
55 }
56 
57 int dram_init_banksize(void)
58 {
59 	fdtdec_setup_memory_banksize();
60 
61 	return 0;
62 }
63 
64 #ifdef CONFIG_USB_GADGET
65 struct dwc2_plat_otg_data socfpga_otg_data = {
66 	.usb_gusbcfg	= 0x1417,
67 };
68 
69 int board_usb_init(int index, enum usb_init_type init)
70 {
71 	int node[2], count;
72 	fdt_addr_t addr;
73 
74 	count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc",
75 					   COMPAT_ALTERA_SOCFPGA_DWC2USB,
76 					   node, 2);
77 	if (count <= 0)	/* No controller found. */
78 		return 0;
79 
80 	addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg");
81 	if (addr == FDT_ADDR_T_NONE) {
82 		printf("UDC Controller has no 'reg' property!\n");
83 		return -EINVAL;
84 	}
85 
86 	/* Patch the address from OF into the controller pdata. */
87 	socfpga_otg_data.regs_otg = addr;
88 
89 	return dwc2_udc_probe(&socfpga_otg_data);
90 }
91 
92 int g_dnl_board_usb_cable_connected(void)
93 {
94 	return 1;
95 }
96 #endif
97