1 /* 2 * (C) Copyright 2016 Rockchip Electronics Co., Ltd 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <debug_uart.h> 9 #include <dm.h> 10 #include <fdtdec.h> 11 #include <led.h> 12 #include <malloc.h> 13 #include <mmc.h> 14 #include <ram.h> 15 #include <spl.h> 16 #include <asm/gpio.h> 17 #include <asm/io.h> 18 #include <asm/arch/clock.h> 19 #include <asm/arch/hardware.h> 20 #include <asm/arch/periph.h> 21 #include <asm/arch/sdram.h> 22 #include <asm/arch/timer.h> 23 #include <dm/pinctrl.h> 24 #include <dm/root.h> 25 #include <dm/test.h> 26 #include <dm/util.h> 27 #include <power/regulator.h> 28 29 DECLARE_GLOBAL_DATA_PTR; 30 31 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OF_CONTROL) 32 static int spl_node_to_boot_device(int node) 33 { 34 struct udevice *parent; 35 36 /* 37 * This should eventually move into the SPL code, once SPL becomes 38 * aware of the block-device layer. Until then (and to avoid unneeded 39 * delays in getting this feature out, it lives at the board-level). 40 */ 41 if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { 42 struct udevice *dev; 43 struct blk_desc *desc = NULL; 44 45 for (device_find_first_child(parent, &dev); 46 dev; 47 device_find_next_child(&dev)) { 48 if (device_get_uclass_id(dev) == UCLASS_BLK) { 49 desc = dev_get_uclass_platdata(dev); 50 break; 51 } 52 } 53 54 if (!desc) 55 return -ENOENT; 56 57 switch (desc->devnum) { 58 case 0: 59 return BOOT_DEVICE_MMC1; 60 case 1: 61 return BOOT_DEVICE_MMC2; 62 default: 63 return -ENOSYS; 64 } 65 } 66 67 /* 68 * SPL doesn't differentiate SPI flashes, so we keep the detection 69 * brief and inaccurate... hopefully, the common SPL layer can be 70 * extended with awareness of the BLK layer (and matching OF_CONTROL) 71 * soon. 72 */ 73 if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent)) 74 return BOOT_DEVICE_SPI; 75 76 return -1; 77 } 78 79 void board_boot_order(u32 *spl_boot_list) 80 { 81 const void *blob = gd->fdt_blob; 82 int chosen_node = fdt_path_offset(blob, "/chosen"); 83 int idx = 0; 84 int elem; 85 int boot_device; 86 int node; 87 const char *conf; 88 89 if (chosen_node < 0) { 90 debug("%s: /chosen not found, using spl_boot_device()\n", 91 __func__); 92 spl_boot_list[0] = spl_boot_device(); 93 return; 94 } 95 96 for (elem = 0; 97 (conf = fdt_stringlist_get(blob, chosen_node, 98 "u-boot,spl-boot-order", elem, NULL)); 99 elem++) { 100 /* First check if the list element is an alias */ 101 const char *alias = fdt_get_alias(blob, conf); 102 if (alias) 103 conf = alias; 104 105 /* Try to resolve the config item (or alias) as a path */ 106 node = fdt_path_offset(blob, conf); 107 if (node < 0) { 108 debug("%s: could not find %s in FDT", __func__, conf); 109 continue; 110 } 111 112 /* Try to map this back onto SPL boot devices */ 113 boot_device = spl_node_to_boot_device(node); 114 if (boot_device < 0) { 115 debug("%s: could not map node @%x to a boot-device\n", 116 __func__, node); 117 continue; 118 } 119 120 spl_boot_list[idx++] = boot_device; 121 } 122 123 /* If we had no matches, fall back to spl_boot_device */ 124 if (idx == 0) 125 spl_boot_list[0] = spl_boot_device(); 126 } 127 #endif 128 129 u32 spl_boot_device(void) 130 { 131 return BOOT_DEVICE_MMC1; 132 } 133 134 u32 spl_boot_mode(const u32 boot_device) 135 { 136 return MMCSD_MODE_RAW; 137 } 138 139 #define TIMER_CHN10_BASE 0xff8680a0 140 #define TIMER_END_COUNT_L 0x00 141 #define TIMER_END_COUNT_H 0x04 142 #define TIMER_INIT_COUNT_L 0x10 143 #define TIMER_INIT_COUNT_H 0x14 144 #define TIMER_CONTROL_REG 0x1c 145 146 #define TIMER_EN 0x1 147 #define TIMER_FMODE (0 << 1) 148 #define TIMER_RMODE (1 << 1) 149 150 void secure_timer_init(void) 151 { 152 writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L); 153 writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H); 154 writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L); 155 writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H); 156 writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG); 157 } 158 159 #define GRF_EMMCCORE_CON11 0xff77f02c 160 void board_init_f(ulong dummy) 161 { 162 struct udevice *pinctrl; 163 struct udevice *dev; 164 int ret; 165 166 /* Example code showing how to enable the debug UART on RK3288 */ 167 #include <asm/arch/grf_rk3399.h> 168 /* Enable early UART2 channel C on the RK3399 */ 169 #define GRF_BASE 0xff770000 170 struct rk3399_grf_regs * const grf = (void *)GRF_BASE; 171 172 rk_clrsetreg(&grf->gpio4c_iomux, 173 GRF_GPIO4C3_SEL_MASK, 174 GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT); 175 rk_clrsetreg(&grf->gpio4c_iomux, 176 GRF_GPIO4C4_SEL_MASK, 177 GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT); 178 /* Set channel C as UART2 input */ 179 rk_clrsetreg(&grf->soc_con7, 180 GRF_UART_DBG_SEL_MASK, 181 GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT); 182 #define EARLY_UART 183 #ifdef EARLY_UART 184 /* 185 * Debug UART can be used from here if required: 186 * 187 * debug_uart_init(); 188 * printch('a'); 189 * printhex8(0x1234); 190 * printascii("string"); 191 */ 192 debug_uart_init(); 193 printascii("U-Boot SPL board init"); 194 #endif 195 /* Emmc clock generator: disable the clock multipilier */ 196 rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff); 197 198 ret = spl_early_init(); 199 if (ret) { 200 debug("spl_early_init() failed: %d\n", ret); 201 hang(); 202 } 203 204 secure_timer_init(); 205 206 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); 207 if (ret) { 208 debug("Pinctrl init failed: %d\n", ret); 209 return; 210 } 211 212 ret = uclass_get_device(UCLASS_RAM, 0, &dev); 213 if (ret) { 214 debug("DRAM init failed: %d\n", ret); 215 return; 216 } 217 } 218 219 void spl_board_init(void) 220 { 221 struct udevice *pinctrl; 222 int ret; 223 224 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); 225 if (ret) { 226 debug("%s: Cannot find pinctrl device\n", __func__); 227 goto err; 228 } 229 230 /* Enable debug UART */ 231 ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); 232 if (ret) { 233 debug("%s: Failed to set up console UART\n", __func__); 234 goto err; 235 } 236 237 preloader_console_init(); 238 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM 239 back_to_bootrom(); 240 #endif 241 return; 242 err: 243 printf("spl_board_init: Error %d\n", ret); 244 245 /* No way to report error here */ 246 hang(); 247 } 248 249 #ifdef CONFIG_SPL_LOAD_FIT 250 int board_fit_config_name_match(const char *name) 251 { 252 /* Just empty function now - can't decide what to choose */ 253 debug("%s: %s\n", __func__, name); 254 255 return 0; 256 } 257 #endif 258