1 /* 2 * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <asm/arch/clock.h> 9 #include <debug_uart.h> 10 #include <dm.h> 11 #include <ram.h> 12 #include <spl.h> 13 #include <asm/io.h> 14 #include <asm/arch/bootrom.h> 15 #include <asm/arch/cru_rk3368.h> 16 #include <asm/arch/grf_rk3368.h> 17 #include <asm/arch/hardware.h> 18 #include <asm/arch/timer.h> 19 #include <syscon.h> 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 /* 24 * The SPL (and also the full U-Boot stage on the RK3368) will run in 25 * secure mode (i.e. EL3) and an ATF will eventually be booted before 26 * starting up the operating system... so we can initialize the SGRF 27 * here and rely on the ATF installing the final (secure) policy 28 * later. 29 */ 30 static inline uintptr_t sgrf_soc_con_addr(unsigned no) 31 { 32 const uintptr_t SGRF_BASE = 33 (uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); 34 35 return SGRF_BASE + sizeof(u32) * no; 36 } 37 38 static inline uintptr_t sgrf_busdmac_addr(unsigned no) 39 { 40 const uintptr_t SGRF_BASE = 41 (uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); 42 const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100; 43 const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET; 44 45 return SGRF_BUSDMAC_BASE + sizeof(u32) * no; 46 } 47 48 static void sgrf_init(void) 49 { 50 struct rk3368_cru * const cru = 51 (struct rk3368_cru * const)rockchip_get_cru(); 52 const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0); 53 const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2); 54 const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12); 55 56 /* Set all configurable IP to 'non secure'-mode */ 57 rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC); 58 rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC); 59 rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC); 60 61 /* 62 * From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c 63 * Original comment: "ddr space set no secure mode" 64 */ 65 rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC); 66 rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC); 67 rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC); 68 69 /* Set 'secure dma' to 'non secure'-mode */ 70 rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC); 71 rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC); 72 73 dsb(); /* barrier */ 74 75 rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ); 76 rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ); 77 78 dsb(); /* barrier */ 79 udelay(10); 80 81 rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ); 82 rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ); 83 } 84 85 void board_debug_uart_init(void) 86 { 87 /* 88 * N.B.: This is called before the device-model has been 89 * initialised. For this reason, we can not access 90 * the GRF address range using the syscon API. 91 */ 92 struct rk3368_grf * const grf = 93 (struct rk3368_grf * const)0xff770000; 94 95 enum { 96 GPIO2D1_MASK = GENMASK(3, 2), 97 GPIO2D1_GPIO = 0, 98 GPIO2D1_UART0_SOUT = (1 << 2), 99 100 GPIO2D0_MASK = GENMASK(1, 0), 101 GPIO2D0_GPIO = 0, 102 GPIO2D0_UART0_SIN = (1 << 0), 103 }; 104 105 #if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) 106 /* Enable early UART0 on the RK3368 */ 107 rk_clrsetreg(&grf->gpio2d_iomux, 108 GPIO2D0_MASK, GPIO2D0_UART0_SIN); 109 rk_clrsetreg(&grf->gpio2d_iomux, 110 GPIO2D1_MASK, GPIO2D1_UART0_SOUT); 111 #endif 112 } 113 114 void board_init_f(ulong dummy) 115 { 116 struct udevice *dev; 117 int ret; 118 119 #define EARLY_UART 120 #ifdef EARLY_UART 121 /* 122 * Debug UART can be used from here if required: 123 * 124 * debug_uart_init(); 125 * printch('a'); 126 * printhex8(0x1234); 127 * printascii("string"); 128 */ 129 debug_uart_init(); 130 printascii("U-Boot TPL board init\n"); 131 #endif 132 133 ret = spl_early_init(); 134 if (ret) { 135 debug("spl_early_init() failed: %d\n", ret); 136 hang(); 137 } 138 139 /* Reset security, so we can use DMA in the MMC drivers */ 140 sgrf_init(); 141 142 ret = uclass_get_device(UCLASS_RAM, 0, &dev); 143 if (ret) { 144 debug("DRAM init failed: %d\n", ret); 145 return; 146 } 147 } 148 149 void board_return_to_bootrom(void) 150 { 151 back_to_bootrom(); 152 } 153 154 u32 spl_boot_device(void) 155 { 156 return BOOT_DEVICE_BOOTROM; 157 } 158