1 /*
2  * (C) Copyright 2015 Google, Inc
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <clk.h>
9 #include <dm.h>
10 #include <ram.h>
11 #include <syscon.h>
12 #include <asm/io.h>
13 #include <asm/arch/clock.h>
14 #include <asm/arch/periph.h>
15 #include <asm/arch/pmu_rk3288.h>
16 #include <asm/arch/qos_rk3288.h>
17 #include <asm/arch/boot_mode.h>
18 #include <asm/gpio.h>
19 #include <dm/pinctrl.h>
20 #include <dt-bindings/clock/rk3288-cru.h>
21 #include <power/regulator.h>
22 
23 DECLARE_GLOBAL_DATA_PTR;
24 
25 #define PMU_BASE	0xff730000
26 
27 static void setup_boot_mode(void)
28 {
29 	struct rk3288_pmu *const pmu = (void *)PMU_BASE;
30 	int boot_mode = readl(&pmu->sys_reg[0]);
31 
32 	debug("boot mode %x.\n", boot_mode);
33 
34 	/* Clear boot mode */
35 	writel(BOOT_NORMAL, &pmu->sys_reg[0]);
36 
37 	switch (boot_mode) {
38 	case BOOT_FASTBOOT:
39 		printf("enter fastboot!\n");
40 		setenv("preboot", "setenv preboot; fastboot usb0");
41 		break;
42 	case BOOT_UMS:
43 		printf("enter UMS!\n");
44 		setenv("preboot", "setenv preboot; if mmc dev 0;"
45 		       "then ums mmc 0; else ums mmc 1;fi");
46 		break;
47 	}
48 }
49 
50 __weak int rk_board_late_init(void)
51 {
52 	return 0;
53 }
54 
55 int rk3288_qos_init(void)
56 {
57 	int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT;
58 	/* set vop qos to higher priority */
59 	writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS);
60 	writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS);
61 
62 	if (!fdt_node_check_compatible(gd->fdt_blob, 0,
63 				       "rockchip,rk3288-tinker"))
64 	{
65 		/* set isp qos to higher priority */
66 		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS);
67 		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS);
68 		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS);
69 	}
70 	return 0;
71 }
72 
73 int board_late_init(void)
74 {
75 	setup_boot_mode();
76 	rk3288_qos_init();
77 
78 	return rk_board_late_init();
79 }
80 
81 #ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
82 static int veyron_init(void)
83 {
84 	struct udevice *dev;
85 	struct clk clk;
86 	int ret;
87 
88 	ret = regulator_get_by_platname("vdd_arm", &dev);
89 	if (ret)
90 		return ret;
91 
92 	/* Slowly raise to max CPU voltage to prevent overshoot */
93 	ret = regulator_set_value(dev, 1200000);
94 	if (ret)
95 		return ret;
96 	udelay(175); /* Must wait for voltage to stabilize, 2mV/us */
97 	ret = regulator_set_value(dev, 1400000);
98 	if (ret)
99 		return ret;
100 	udelay(100); /* Must wait for voltage to stabilize, 2mV/us */
101 
102 	ret = rockchip_get_clk(&clk.dev);
103 	if (ret)
104 		return ret;
105 	clk.id = PLL_APLL;
106 	ret = clk_set_rate(&clk, 1800000000);
107 	if (IS_ERR_VALUE(ret))
108 		return ret;
109 
110 	return 0;
111 }
112 #endif
113 
114 int board_init(void)
115 {
116 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
117 	struct udevice *pinctrl;
118 	int ret;
119 
120 	/*
121 	 * We need to implement sdcard iomux here for the further
122 	 * initlization, otherwise, it'll hit sdcard command sending
123 	 * timeout exception.
124 	 */
125 	ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
126 	if (ret) {
127 		debug("%s: Cannot find pinctrl device\n", __func__);
128 		goto err;
129 	}
130 	ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
131 	if (ret) {
132 		debug("%s: Failed to set up SD card\n", __func__);
133 		goto err;
134 	}
135 
136 	return 0;
137 err:
138 	printf("board_init: Error %d\n", ret);
139 
140 	/* No way to report error here */
141 	hang();
142 
143 	return -1;
144 #else
145 	int ret;
146 
147 	/* We do some SoC one time setting here */
148 	if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) {
149 		ret = veyron_init();
150 		if (ret)
151 			return ret;
152 	}
153 
154 	return 0;
155 #endif
156 }
157 
158 int dram_init(void)
159 {
160 	struct ram_info ram;
161 	struct udevice *dev;
162 	int ret;
163 
164 	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
165 	if (ret) {
166 		debug("DRAM init failed: %d\n", ret);
167 		return ret;
168 	}
169 	ret = ram_get_info(dev, &ram);
170 	if (ret) {
171 		debug("Cannot get DRAM size: %d\n", ret);
172 		return ret;
173 	}
174 	debug("SDRAM base=%lx, size=%x\n", ram.base, ram.size);
175 	gd->ram_size = ram.size;
176 
177 	return 0;
178 }
179 
180 #ifndef CONFIG_SYS_DCACHE_OFF
181 void enable_caches(void)
182 {
183 	/* Enable D-cache. I-cache is already enabled in start.S */
184 	dcache_enable();
185 }
186 #endif
187 
188 #if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
189 #include <usb.h>
190 #include <usb/dwc2_udc.h>
191 
192 static struct dwc2_plat_otg_data rk3288_otg_data = {
193 	.rx_fifo_sz	= 512,
194 	.np_tx_fifo_sz	= 16,
195 	.tx_fifo_sz	= 128,
196 };
197 
198 int board_usb_init(int index, enum usb_init_type init)
199 {
200 	int node, phy_node;
201 	const char *mode;
202 	bool matched = false;
203 	const void *blob = gd->fdt_blob;
204 	u32 grf_phy_offset;
205 
206 	/* find the usb_otg node */
207 	node = fdt_node_offset_by_compatible(blob, -1,
208 					"rockchip,rk3288-usb");
209 
210 	while (node > 0) {
211 		mode = fdt_getprop(blob, node, "dr_mode", NULL);
212 		if (mode && strcmp(mode, "otg") == 0) {
213 			matched = true;
214 			break;
215 		}
216 
217 		node = fdt_node_offset_by_compatible(blob, node,
218 					"rockchip,rk3288-usb");
219 	}
220 	if (!matched) {
221 		debug("Not found usb_otg device\n");
222 		return -ENODEV;
223 	}
224 	rk3288_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
225 
226 	node = fdtdec_lookup_phandle(blob, node, "phys");
227 	if (node <= 0) {
228 		debug("Not found usb phy device\n");
229 		return -ENODEV;
230 	}
231 
232 	phy_node = fdt_parent_offset(blob, node);
233 	if (phy_node <= 0) {
234 		debug("Not found usb phy device\n");
235 		return -ENODEV;
236 	}
237 
238 	rk3288_otg_data.phy_of_node = phy_node;
239 	grf_phy_offset = fdtdec_get_addr(blob, node, "reg");
240 
241 	/* find the grf node */
242 	node = fdt_node_offset_by_compatible(blob, -1,
243 					"rockchip,rk3288-grf");
244 	if (node <= 0) {
245 		debug("Not found grf device\n");
246 		return -ENODEV;
247 	}
248 	rk3288_otg_data.regs_phy = grf_phy_offset +
249 				fdtdec_get_addr(blob, node, "reg");
250 
251 	return dwc2_udc_probe(&rk3288_otg_data);
252 }
253 
254 int board_usb_cleanup(int index, enum usb_init_type init)
255 {
256 	return 0;
257 }
258 #endif
259 
260 static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc,
261 		       char * const argv[])
262 {
263 	static const struct {
264 		char *name;
265 		int id;
266 	} clks[] = {
267 		{ "osc", CLK_OSC },
268 		{ "apll", CLK_ARM },
269 		{ "dpll", CLK_DDR },
270 		{ "cpll", CLK_CODEC },
271 		{ "gpll", CLK_GENERAL },
272 #ifdef CONFIG_ROCKCHIP_RK3036
273 		{ "mpll", CLK_NEW },
274 #else
275 		{ "npll", CLK_NEW },
276 #endif
277 	};
278 	int ret, i;
279 	struct udevice *dev;
280 
281 	ret = rockchip_get_clk(&dev);
282 	if (ret) {
283 		printf("clk-uclass not found\n");
284 		return 0;
285 	}
286 
287 	for (i = 0; i < ARRAY_SIZE(clks); i++) {
288 		struct clk clk;
289 		ulong rate;
290 
291 		clk.id = clks[i].id;
292 		ret = clk_request(dev, &clk);
293 		if (ret < 0)
294 			continue;
295 
296 		rate = clk_get_rate(&clk);
297 		printf("%s: %lu\n", clks[i].name, rate);
298 
299 		clk_free(&clk);
300 	}
301 
302 	return 0;
303 }
304 
305 U_BOOT_CMD(
306 	clock, 2, 1, do_clock,
307 	"display information about clocks",
308 	""
309 );
310