1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2015 Google, Inc 4 */ 5 6 #include <common.h> 7 #include <debug_uart.h> 8 #include <dm.h> 9 #include <fdtdec.h> 10 #include <i2c.h> 11 #include <led.h> 12 #include <malloc.h> 13 #include <ram.h> 14 #include <spl.h> 15 #include <asm/gpio.h> 16 #include <asm/io.h> 17 #include <asm/arch/bootrom.h> 18 #include <asm/arch/clock.h> 19 #include <asm/arch/hardware.h> 20 #include <asm/arch/periph.h> 21 #include <asm/arch/pmu_rk3288.h> 22 #include <asm/arch/sdram.h> 23 #include <asm/arch/sdram_common.h> 24 #include <asm/arch/sys_proto.h> 25 #include <asm/arch/timer.h> 26 #include <dm/pinctrl.h> 27 #include <dm/root.h> 28 #include <dm/test.h> 29 #include <dm/util.h> 30 #include <power/regulator.h> 31 #include <power/rk8xx_pmic.h> 32 33 DECLARE_GLOBAL_DATA_PTR; 34 35 u32 spl_boot_device(void) 36 { 37 #if !CONFIG_IS_ENABLED(OF_PLATDATA) 38 const void *blob = gd->fdt_blob; 39 struct udevice *dev; 40 const char *bootdev; 41 int node; 42 int ret; 43 44 bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); 45 debug("Boot device %s\n", bootdev); 46 if (!bootdev) 47 goto fallback; 48 49 node = fdt_path_offset(blob, bootdev); 50 if (node < 0) { 51 debug("node=%d\n", node); 52 goto fallback; 53 } 54 ret = device_get_global_by_ofnode(offset_to_ofnode(node), &dev); 55 if (ret) { 56 debug("device at node %s/%d not found: %d\n", bootdev, node, 57 ret); 58 goto fallback; 59 } 60 debug("Found device %s\n", dev->name); 61 switch (device_get_uclass_id(dev)) { 62 case UCLASS_SPI_FLASH: 63 return BOOT_DEVICE_SPI; 64 case UCLASS_MMC: 65 return BOOT_DEVICE_MMC1; 66 default: 67 debug("Booting from device uclass '%s' not supported\n", 68 dev_get_uclass_name(dev)); 69 } 70 71 fallback: 72 #elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \ 73 defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \ 74 defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) 75 return BOOT_DEVICE_SPI; 76 #endif 77 return BOOT_DEVICE_MMC1; 78 } 79 80 #ifdef CONFIG_SPL_MMC_SUPPORT 81 static int configure_emmc(struct udevice *pinctrl) 82 { 83 #if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) 84 85 struct gpio_desc desc; 86 int ret; 87 88 pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); 89 90 /* 91 * TODO(sjg@chromium.org): Pick this up from device tree or perhaps 92 * use the EMMC_PWREN setting. 93 */ 94 ret = dm_gpio_lookup_name("D9", &desc); 95 if (ret) { 96 debug("gpio ret=%d\n", ret); 97 return ret; 98 } 99 ret = dm_gpio_request(&desc, "emmc_pwren"); 100 if (ret) { 101 debug("gpio_request ret=%d\n", ret); 102 return ret; 103 } 104 ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); 105 if (ret) { 106 debug("gpio dir ret=%d\n", ret); 107 return ret; 108 } 109 ret = dm_gpio_set_value(&desc, 1); 110 if (ret) { 111 debug("gpio value ret=%d\n", ret); 112 return ret; 113 } 114 #endif 115 return 0; 116 } 117 #endif 118 119 #if !defined(CONFIG_SPL_OF_PLATDATA) 120 static int phycore_init(void) 121 { 122 struct udevice *pmic; 123 int ret; 124 125 ret = uclass_first_device_err(UCLASS_PMIC, &pmic); 126 if (ret) 127 return ret; 128 129 #if defined(CONFIG_SPL_POWER_SUPPORT) 130 /* Increase USB input current to 2A */ 131 ret = rk818_spl_configure_usb_input_current(pmic, 2000); 132 if (ret) 133 return ret; 134 135 /* Close charger when USB lower then 3.26V */ 136 ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000); 137 if (ret) 138 return ret; 139 #endif 140 141 return 0; 142 } 143 #endif 144 145 void board_init_f(ulong dummy) 146 { 147 struct udevice *pinctrl; 148 struct udevice *dev; 149 int ret; 150 151 /* Example code showing how to enable the debug UART on RK3288 */ 152 #include <asm/arch/grf_rk3288.h> 153 /* Enable early UART on the RK3288 */ 154 #define GRF_BASE 0xff770000 155 struct rk3288_grf * const grf = (void *)GRF_BASE; 156 157 rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | 158 GPIO7C6_MASK << GPIO7C6_SHIFT, 159 GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | 160 GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); 161 /* 162 * Debug UART can be used from here if required: 163 * 164 * debug_uart_init(); 165 * printch('a'); 166 * printhex8(0x1234); 167 * printascii("string"); 168 */ 169 debug_uart_init(); 170 debug("\nspl:debug uart enabled in %s\n", __func__); 171 ret = spl_early_init(); 172 if (ret) { 173 debug("spl_early_init() failed: %d\n", ret); 174 hang(); 175 } 176 177 rockchip_timer_init(); 178 configure_l2ctlr(); 179 180 ret = rockchip_get_clk(&dev); 181 if (ret) { 182 debug("CLK init failed: %d\n", ret); 183 return; 184 } 185 186 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); 187 if (ret) { 188 debug("Pinctrl init failed: %d\n", ret); 189 return; 190 } 191 192 #if !defined(CONFIG_SPL_OF_PLATDATA) 193 if (of_machine_is_compatible("phytec,rk3288-phycore-som")) { 194 ret = phycore_init(); 195 if (ret) { 196 debug("Failed to set up phycore power settings: %d\n", 197 ret); 198 return; 199 } 200 } 201 #endif 202 203 #if !defined(CONFIG_SUPPORT_TPL) 204 debug("\nspl:init dram\n"); 205 ret = uclass_get_device(UCLASS_RAM, 0, &dev); 206 if (ret) { 207 debug("DRAM init failed: %d\n", ret); 208 return; 209 } 210 #endif 211 212 #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) 213 back_to_bootrom(BROM_BOOT_NEXTSTAGE); 214 #endif 215 } 216 217 static int setup_led(void) 218 { 219 #ifdef CONFIG_SPL_LED 220 struct udevice *dev; 221 char *led_name; 222 int ret; 223 224 led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); 225 if (!led_name) 226 return 0; 227 ret = led_get_by_label(led_name, &dev); 228 if (ret) { 229 debug("%s: get=%d\n", __func__, ret); 230 return ret; 231 } 232 ret = led_set_on(dev, 1); 233 if (ret) 234 return ret; 235 #endif 236 237 return 0; 238 } 239 240 void spl_board_init(void) 241 { 242 struct udevice *pinctrl; 243 int ret; 244 245 ret = setup_led(); 246 247 if (ret) { 248 debug("LED ret=%d\n", ret); 249 hang(); 250 } 251 252 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); 253 if (ret) { 254 debug("%s: Cannot find pinctrl device\n", __func__); 255 goto err; 256 } 257 258 #ifdef CONFIG_SPL_MMC_SUPPORT 259 ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); 260 if (ret) { 261 debug("%s: Failed to set up SD card\n", __func__); 262 goto err; 263 } 264 ret = configure_emmc(pinctrl); 265 if (ret) { 266 debug("%s: Failed to set up eMMC\n", __func__); 267 goto err; 268 } 269 #endif 270 271 /* Enable debug UART */ 272 ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); 273 if (ret) { 274 debug("%s: Failed to set up console UART\n", __func__); 275 goto err; 276 } 277 278 preloader_console_init(); 279 #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) 280 back_to_bootrom(BROM_BOOT_NEXTSTAGE); 281 #endif 282 return; 283 err: 284 printf("spl_board_init: Error %d\n", ret); 285 286 /* No way to report error here */ 287 hang(); 288 } 289 290 #ifdef CONFIG_SPL_OS_BOOT 291 292 #define PMU_BASE 0xff730000 293 int dram_init_banksize(void) 294 { 295 struct rk3288_pmu *const pmu = (void *)PMU_BASE; 296 size_t size = rockchip_sdram_size((phys_addr_t)&pmu->sys_reg[2]); 297 298 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 299 gd->bd->bi_dram[0].size = size; 300 301 return 0; 302 } 303 #endif 304