1 /* 2 * (C) Copyright 2015 Google, Inc 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <debug_uart.h> 9 #include <dm.h> 10 #include <fdtdec.h> 11 #include <i2c.h> 12 #include <led.h> 13 #include <malloc.h> 14 #include <ram.h> 15 #include <spl.h> 16 #include <asm/gpio.h> 17 #include <asm/io.h> 18 #include <asm/arch/bootrom.h> 19 #include <asm/arch/clock.h> 20 #include <asm/arch/hardware.h> 21 #include <asm/arch/periph.h> 22 #include <asm/arch/pmu_rk3288.h> 23 #include <asm/arch/sdram.h> 24 #include <asm/arch/sdram_common.h> 25 #include <asm/arch/sys_proto.h> 26 #include <asm/arch/timer.h> 27 #include <dm/pinctrl.h> 28 #include <dm/root.h> 29 #include <dm/test.h> 30 #include <dm/util.h> 31 #include <power/regulator.h> 32 #include <power/rk8xx_pmic.h> 33 34 DECLARE_GLOBAL_DATA_PTR; 35 36 u32 spl_boot_device(void) 37 { 38 #if !CONFIG_IS_ENABLED(OF_PLATDATA) 39 const void *blob = gd->fdt_blob; 40 struct udevice *dev; 41 const char *bootdev; 42 int node; 43 int ret; 44 45 bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); 46 debug("Boot device %s\n", bootdev); 47 if (!bootdev) 48 goto fallback; 49 50 node = fdt_path_offset(blob, bootdev); 51 if (node < 0) { 52 debug("node=%d\n", node); 53 goto fallback; 54 } 55 ret = device_get_global_by_of_offset(node, &dev); 56 if (ret) { 57 debug("device at node %s/%d not found: %d\n", bootdev, node, 58 ret); 59 goto fallback; 60 } 61 debug("Found device %s\n", dev->name); 62 switch (device_get_uclass_id(dev)) { 63 case UCLASS_SPI_FLASH: 64 return BOOT_DEVICE_SPI; 65 case UCLASS_MMC: 66 return BOOT_DEVICE_MMC1; 67 default: 68 debug("Booting from device uclass '%s' not supported\n", 69 dev_get_uclass_name(dev)); 70 } 71 72 fallback: 73 #elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \ 74 defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \ 75 defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) 76 return BOOT_DEVICE_SPI; 77 #endif 78 return BOOT_DEVICE_MMC1; 79 } 80 81 u32 spl_boot_mode(const u32 boot_device) 82 { 83 return MMCSD_MODE_RAW; 84 } 85 86 #ifdef CONFIG_SPL_MMC_SUPPORT 87 static int configure_emmc(struct udevice *pinctrl) 88 { 89 #if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) 90 91 struct gpio_desc desc; 92 int ret; 93 94 pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); 95 96 /* 97 * TODO(sjg@chromium.org): Pick this up from device tree or perhaps 98 * use the EMMC_PWREN setting. 99 */ 100 ret = dm_gpio_lookup_name("D9", &desc); 101 if (ret) { 102 debug("gpio ret=%d\n", ret); 103 return ret; 104 } 105 ret = dm_gpio_request(&desc, "emmc_pwren"); 106 if (ret) { 107 debug("gpio_request ret=%d\n", ret); 108 return ret; 109 } 110 ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); 111 if (ret) { 112 debug("gpio dir ret=%d\n", ret); 113 return ret; 114 } 115 ret = dm_gpio_set_value(&desc, 1); 116 if (ret) { 117 debug("gpio value ret=%d\n", ret); 118 return ret; 119 } 120 #endif 121 return 0; 122 } 123 #endif 124 125 #if !defined(CONFIG_SPL_OF_PLATDATA) 126 static int phycore_init(void) 127 { 128 struct udevice *pmic; 129 int ret; 130 131 ret = uclass_first_device_err(UCLASS_PMIC, &pmic); 132 if (ret) 133 return ret; 134 135 #if defined(CONFIG_SPL_POWER_SUPPORT) 136 /* Increase USB input current to 2A */ 137 ret = rk818_spl_configure_usb_input_current(pmic, 2000); 138 if (ret) 139 return ret; 140 141 /* Close charger when USB lower then 3.26V */ 142 ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000); 143 if (ret) 144 return ret; 145 #endif 146 147 return 0; 148 } 149 #endif 150 151 void board_init_f(ulong dummy) 152 { 153 struct udevice *pinctrl; 154 struct udevice *dev; 155 int ret; 156 157 /* Example code showing how to enable the debug UART on RK3288 */ 158 #include <asm/arch/grf_rk3288.h> 159 /* Enable early UART on the RK3288 */ 160 #define GRF_BASE 0xff770000 161 struct rk3288_grf * const grf = (void *)GRF_BASE; 162 163 rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | 164 GPIO7C6_MASK << GPIO7C6_SHIFT, 165 GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | 166 GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); 167 /* 168 * Debug UART can be used from here if required: 169 * 170 * debug_uart_init(); 171 * printch('a'); 172 * printhex8(0x1234); 173 * printascii("string"); 174 */ 175 debug_uart_init(); 176 debug("\nspl:debug uart enabled in %s\n", __func__); 177 ret = spl_early_init(); 178 if (ret) { 179 debug("spl_early_init() failed: %d\n", ret); 180 hang(); 181 } 182 183 rockchip_timer_init(); 184 configure_l2ctlr(); 185 186 ret = rockchip_get_clk(&dev); 187 if (ret) { 188 debug("CLK init failed: %d\n", ret); 189 return; 190 } 191 192 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); 193 if (ret) { 194 debug("Pinctrl init failed: %d\n", ret); 195 return; 196 } 197 198 #if !defined(CONFIG_SPL_OF_PLATDATA) 199 if (of_machine_is_compatible("phytec,rk3288-phycore-som")) { 200 ret = phycore_init(); 201 if (ret) { 202 debug("Failed to set up phycore power settings: %d\n", 203 ret); 204 return; 205 } 206 } 207 #endif 208 209 #if !defined(CONFIG_SUPPORT_TPL) 210 debug("\nspl:init dram\n"); 211 ret = uclass_get_device(UCLASS_RAM, 0, &dev); 212 if (ret) { 213 debug("DRAM init failed: %d\n", ret); 214 return; 215 } 216 #endif 217 218 #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) 219 back_to_bootrom(); 220 #endif 221 } 222 223 static int setup_led(void) 224 { 225 #ifdef CONFIG_SPL_LED 226 struct udevice *dev; 227 char *led_name; 228 int ret; 229 230 led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); 231 if (!led_name) 232 return 0; 233 ret = led_get_by_label(led_name, &dev); 234 if (ret) { 235 debug("%s: get=%d\n", __func__, ret); 236 return ret; 237 } 238 ret = led_set_on(dev, 1); 239 if (ret) 240 return ret; 241 #endif 242 243 return 0; 244 } 245 246 void spl_board_init(void) 247 { 248 struct udevice *pinctrl; 249 int ret; 250 251 ret = setup_led(); 252 253 if (ret) { 254 debug("LED ret=%d\n", ret); 255 hang(); 256 } 257 258 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); 259 if (ret) { 260 debug("%s: Cannot find pinctrl device\n", __func__); 261 goto err; 262 } 263 264 #ifdef CONFIG_SPL_MMC_SUPPORT 265 ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); 266 if (ret) { 267 debug("%s: Failed to set up SD card\n", __func__); 268 goto err; 269 } 270 ret = configure_emmc(pinctrl); 271 if (ret) { 272 debug("%s: Failed to set up eMMC\n", __func__); 273 goto err; 274 } 275 #endif 276 277 /* Enable debug UART */ 278 ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); 279 if (ret) { 280 debug("%s: Failed to set up console UART\n", __func__); 281 goto err; 282 } 283 284 preloader_console_init(); 285 #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) 286 back_to_bootrom(); 287 #endif 288 return; 289 err: 290 printf("spl_board_init: Error %d\n", ret); 291 292 /* No way to report error here */ 293 hang(); 294 } 295 296 #ifdef CONFIG_SPL_OS_BOOT 297 298 #define PMU_BASE 0xff730000 299 int dram_init_banksize(void) 300 { 301 struct rk3288_pmu *const pmu = (void *)PMU_BASE; 302 size_t size = rockchip_sdram_size((phys_addr_t)&pmu->sys_reg[2]); 303 304 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 305 gd->bd->bi_dram[0].size = size; 306 307 return 0; 308 } 309 #endif 310