1 /* 2 * (C) Copyright 2017 Rockchip Electronics Co., Ltd 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <debug_uart.h> 9 #include <dm.h> 10 #include <ram.h> 11 #include <spl.h> 12 #include <asm/io.h> 13 #include <asm/arch/bootrom.h> 14 #include <asm/arch/cru_rk322x.h> 15 #include <asm/arch/grf_rk322x.h> 16 #include <asm/arch/hardware.h> 17 #include <asm/arch/timer.h> 18 #include <asm/arch/uart.h> 19 20 u32 spl_boot_device(void) 21 { 22 return BOOT_DEVICE_MMC1; 23 } 24 DECLARE_GLOBAL_DATA_PTR; 25 26 #define GRF_BASE 0x11000000 27 #define SGRF_BASE 0x10140000 28 29 #define DEBUG_UART_BASE 0x11030000 30 31 void board_debug_uart_init(void) 32 { 33 static struct rk322x_grf * const grf = (void *)GRF_BASE; 34 /* Enable early UART2 channel 1 on the RK322x */ 35 rk_clrsetreg(&grf->gpio1b_iomux, 36 GPIO1B1_MASK | GPIO1B2_MASK, 37 GPIO1B2_UART21_SIN << GPIO1B2_SHIFT | 38 GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT); 39 /* Set channel C as UART2 input */ 40 rk_clrsetreg(&grf->con_iomux, 41 CON_IOMUX_UART2SEL_MASK, 42 CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT); 43 } 44 void board_init_f(ulong dummy) 45 { 46 struct udevice *dev; 47 int ret; 48 49 /* 50 * Debug UART can be used from here if required: 51 * 52 * debug_uart_init(); 53 * printch('a'); 54 * printhex8(0x1234); 55 * printascii("string"); 56 */ 57 debug_uart_init(); 58 printascii("SPL Init"); 59 60 ret = spl_early_init(); 61 if (ret) { 62 debug("spl_early_init() failed: %d\n", ret); 63 hang(); 64 } 65 66 rockchip_timer_init(); 67 printf("timer init done\n"); 68 ret = uclass_get_device(UCLASS_RAM, 0, &dev); 69 if (ret) { 70 printf("DRAM init failed: %d\n", ret); 71 return; 72 } 73 74 #if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) 75 back_to_bootrom(); 76 #endif 77 } 78