xref: /openbmc/u-boot/arch/arm/mach-rockchip/Makefile (revision baefb63a) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o
15obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o
16
17obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
18obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
19obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o
20obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
21obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
22obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
23
24ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
25
26# Always include boot_mode.o, as we bypass it (i.e. turn it off)
27# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
28# we can have the preprocessor correctly recognise both 0x0 and 0
29# meaning "turn it off".
30obj-y += boot_mode.o
31
32obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
33obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128-board.o
34obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o
35obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o
36obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o
37obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board.o
38endif
39
40obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o
41
42ifndef CONFIG_ARM64
43obj-y += rk_timer.o
44endif
45
46obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
47obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
48ifndef CONFIG_TPL_BUILD
49obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
50endif
51obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
52obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
53obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
54obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
55obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
56obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
57
58# Clear out SPL objects, in case this is a TPL build
59obj-spl-$(CONFIG_TPL_BUILD) =
60
61# Now add SPL/TPL objects back into the main build
62obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
63obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
64