1 /* 2 * TI SATA platform driver 3 * 4 * (C) Copyright 2013 5 * Texas Instruments, <www.ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <ahci.h> 12 #include <scsi.h> 13 #include <asm/arch/clock.h> 14 #include <asm/arch/sata.h> 15 #include <sata.h> 16 #include <asm/io.h> 17 #include "pipe3-phy.h" 18 19 static struct pipe3_dpll_map dpll_map_sata[] = { 20 {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ 21 {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ 22 {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ 23 {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ 24 {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ 25 {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ 26 { }, /* Terminator */ 27 }; 28 29 struct omap_pipe3 sata_phy = { 30 .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE, 31 /* .power_reg is updated at runtime */ 32 .dpll_map = dpll_map_sata, 33 }; 34 35 int init_sata(int dev) 36 { 37 int ret; 38 u32 val; 39 40 sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata; 41 42 /* Power up the PHY */ 43 phy_pipe3_power_on(&sata_phy); 44 45 /* Enable SATA module, No Idle, No Standby */ 46 val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO; 47 writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG); 48 49 ret = ahci_init((void __iomem *)DWC_AHSATA_BASE); 50 51 return ret; 52 } 53 54 int reset_sata(int dev) 55 { 56 return 0; 57 } 58 59 /* On OMAP platforms SATA provides the SCSI subsystem */ 60 void scsi_init(void) 61 { 62 init_sata(0); 63 scsi_scan(1); 64 } 65 66 void scsi_bus_reset(void) 67 { 68 ahci_reset((void __iomem *)DWC_AHSATA_BASE); 69 ahci_init((void __iomem *)DWC_AHSATA_BASE); 70 } 71