1 /*
2  *
3  * Functions for omap5 based boards.
4  *
5  * (C) Copyright 2011
6  * Texas Instruments, <www.ti.com>
7  *
8  * Author :
9  *	Aneesh V	<aneesh@ti.com>
10  *	Steve Sakoman	<steve@sakoman.com>
11  *	Sricharan	<r.sricharan@ti.com>
12  *
13  * SPDX-License-Identifier:	GPL-2.0+
14  */
15 #include <common.h>
16 #include <palmas.h>
17 #include <asm/armv7.h>
18 #include <asm/arch/cpu.h>
19 #include <asm/arch/sys_proto.h>
20 #include <asm/arch/clock.h>
21 #include <linux/sizes.h>
22 #include <asm/utils.h>
23 #include <asm/arch/gpio.h>
24 #include <asm/emif.h>
25 #include <asm/omap_common.h>
26 
27 DECLARE_GLOBAL_DATA_PTR;
28 
29 u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
30 
31 #ifndef CONFIG_DM_GPIO
32 static struct gpio_bank gpio_bank_54xx[8] = {
33 	{ (void *)OMAP54XX_GPIO1_BASE },
34 	{ (void *)OMAP54XX_GPIO2_BASE },
35 	{ (void *)OMAP54XX_GPIO3_BASE },
36 	{ (void *)OMAP54XX_GPIO4_BASE },
37 	{ (void *)OMAP54XX_GPIO5_BASE },
38 	{ (void *)OMAP54XX_GPIO6_BASE },
39 	{ (void *)OMAP54XX_GPIO7_BASE },
40 	{ (void *)OMAP54XX_GPIO8_BASE },
41 };
42 
43 const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
44 #endif
45 
46 void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size)
47 {
48 	int i;
49 	struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
50 
51 	for (i = 0; i < size; i++, pad++)
52 		writel(pad->val, base + pad->offset);
53 }
54 
55 #ifdef CONFIG_SPL_BUILD
56 /* LPDDR2 specific IO settings */
57 static void io_settings_lpddr2(void)
58 {
59 	const struct ctrl_ioregs *ioregs;
60 
61 	get_ioregs(&ioregs);
62 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
63 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
64 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
65 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
66 	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
67 	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
68 	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
69 	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
70 	writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
71 }
72 
73 /* DDR3 specific IO settings */
74 static void io_settings_ddr3(void)
75 {
76 	u32 io_settings = 0;
77 	const struct ctrl_ioregs *ioregs;
78 
79 	get_ioregs(&ioregs);
80 	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0);
81 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
82 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
83 
84 	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0);
85 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
86 	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
87 
88 	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
89 	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
90 
91 	if (!is_dra7xx()) {
92 		writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
93 		writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
94 	}
95 
96 	/* omap5432 does not use lpddr2 */
97 	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
98 
99 	writel(ioregs->ctrl_emif_sdram_config_ext,
100 	       (*ctrl)->control_emif1_sdram_config_ext);
101 	if (!is_dra72x())
102 		writel(ioregs->ctrl_emif_sdram_config_ext,
103 		       (*ctrl)->control_emif2_sdram_config_ext);
104 
105 	if (is_omap54xx()) {
106 		/* Disable DLL select */
107 		io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
108 							& 0xFFEFFFFF);
109 		writel(io_settings,
110 			(*ctrl)->control_port_emif1_sdram_config);
111 
112 		io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
113 							& 0xFFEFFFFF);
114 		writel(io_settings,
115 			(*ctrl)->control_port_emif2_sdram_config);
116 	} else {
117 		writel(ioregs->ctrl_ddr_ctrl_ext_0,
118 				(*ctrl)->control_ddr_control_ext_0);
119 	}
120 }
121 
122 /*
123  * Some tuning of IOs for optimal power and performance
124  */
125 void do_io_settings(void)
126 {
127 	u32 io_settings = 0, mask = 0;
128 	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
129 
130 	/* Impedance settings EMMC, C2C 1,2, hsi2 */
131 	mask = (ds_mask << 2) | (ds_mask << 8) |
132 		(ds_mask << 16) | (ds_mask << 18);
133 	io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
134 				(~mask);
135 	io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
136 			(ds_45_ohm << 18) | (ds_60_ohm << 2);
137 	writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
138 
139 	/* Impedance settings Mcspi2 */
140 	mask = (ds_mask << 30);
141 	io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
142 			(~mask);
143 	io_settings |= (ds_60_ohm << 30);
144 	writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
145 
146 	/* Impedance settings C2C 3,4 */
147 	mask = (ds_mask << 14) | (ds_mask << 16);
148 	io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
149 			(~mask);
150 	io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
151 	writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
152 
153 	/* Slew rate settings EMMC, C2C 1,2 */
154 	mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
155 	io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
156 			(~mask);
157 	io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
158 	writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
159 
160 	/* Slew rate settings hsi2, Mcspi2 */
161 	mask = (sc_mask << 24) | (sc_mask << 28);
162 	io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
163 			(~mask);
164 	io_settings |= (sc_fast << 28) | (sc_fast << 24);
165 	writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
166 
167 	/* Slew rate settings C2C 3,4 */
168 	mask = (sc_mask << 16) | (sc_mask << 18);
169 	io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
170 			(~mask);
171 	io_settings |= (sc_na << 16) | (sc_na << 18);
172 	writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
173 
174 	/* impedance and slew rate settings for usb */
175 	mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
176 		(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
177 	io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
178 			(~mask);
179 	io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
180 		       (ds_60_ohm << 23) | (sc_fast << 20) |
181 		       (sc_fast << 17) | (sc_fast << 14);
182 	writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
183 
184 	if (emif_sdram_type(emif->emif_sdram_config) == EMIF_SDRAM_TYPE_LPDDR2)
185 		io_settings_lpddr2();
186 	else
187 		io_settings_ddr3();
188 }
189 
190 static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
191 	{0x45, 0x1},	/* 12 MHz   */
192 	{-1, -1},	/* 13 MHz   */
193 	{0x63, 0x2},	/* 16.8 MHz */
194 	{0x57, 0x2},	/* 19.2 MHz */
195 	{0x20, 0x1},	/* 26 MHz   */
196 	{-1, -1},	/* 27 MHz   */
197 	{0x41, 0x3}	/* 38.4 MHz */
198 };
199 
200 void srcomp_enable(void)
201 {
202 	u32 srcomp_value, mul_factor, div_factor, clk_val, i;
203 	u32 sysclk_ind	= get_sys_clk_index();
204 	u32 omap_rev	= omap_revision();
205 
206 	if (!is_omap54xx())
207 		return;
208 
209 	mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
210 	div_factor = srcomp_parameters[sysclk_ind].divide_factor;
211 
212 	for (i = 0; i < 4; i++) {
213 		srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4);
214 		srcomp_value &=
215 			~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK);
216 		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
217 			(div_factor << DIVIDE_FACTOR_XS_SHIFT);
218 		writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4);
219 	}
220 
221 	if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) {
222 		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
223 		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
224 		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
225 
226 		for (i = 0; i < 4; i++) {
227 			srcomp_value =
228 				readl((*ctrl)->control_srcomp_north_side + i*4);
229 			srcomp_value &= ~PWRDWN_XS_MASK;
230 			writel(srcomp_value,
231 			       (*ctrl)->control_srcomp_north_side + i*4);
232 
233 			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
234 				& SRCODE_READ_XS_MASK) >>
235 				SRCODE_READ_XS_SHIFT) == 0)
236 				;
237 
238 			srcomp_value =
239 				readl((*ctrl)->control_srcomp_north_side + i*4);
240 			srcomp_value &= ~OVERRIDE_XS_MASK;
241 			writel(srcomp_value,
242 			       (*ctrl)->control_srcomp_north_side + i*4);
243 		}
244 	} else {
245 		srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup);
246 		srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK |
247 				  DIVIDE_FACTOR_XS_MASK);
248 		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
249 				(div_factor << DIVIDE_FACTOR_XS_SHIFT);
250 		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
251 
252 		for (i = 0; i < 4; i++) {
253 			srcomp_value =
254 				readl((*ctrl)->control_srcomp_north_side + i*4);
255 			srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
256 			writel(srcomp_value,
257 			       (*ctrl)->control_srcomp_north_side + i*4);
258 
259 			srcomp_value =
260 				readl((*ctrl)->control_srcomp_north_side + i*4);
261 			srcomp_value &= ~OVERRIDE_XS_MASK;
262 			writel(srcomp_value,
263 			       (*ctrl)->control_srcomp_north_side + i*4);
264 		}
265 
266 		srcomp_value =
267 			readl((*ctrl)->control_srcomp_east_side_wkup);
268 		srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
269 		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
270 
271 		srcomp_value =
272 			readl((*ctrl)->control_srcomp_east_side_wkup);
273 		srcomp_value &= ~OVERRIDE_XS_MASK;
274 		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
275 
276 		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
277 		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
278 		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
279 
280 		clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl);
281 		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
282 		writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl);
283 
284 		for (i = 0; i < 4; i++) {
285 			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
286 				& SRCODE_READ_XS_MASK) >>
287 				SRCODE_READ_XS_SHIFT) == 0)
288 				;
289 
290 			srcomp_value =
291 				readl((*ctrl)->control_srcomp_north_side + i*4);
292 			srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
293 			writel(srcomp_value,
294 			       (*ctrl)->control_srcomp_north_side + i*4);
295 		}
296 
297 		while (((readl((*ctrl)->control_srcomp_east_side_wkup) &
298 			SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0)
299 			;
300 
301 		srcomp_value =
302 			readl((*ctrl)->control_srcomp_east_side_wkup);
303 		srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
304 		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
305 	}
306 }
307 #endif
308 
309 void config_data_eye_leveling_samples(u32 emif_base)
310 {
311 	const struct ctrl_ioregs *ioregs;
312 
313 	get_ioregs(&ioregs);
314 
315 	/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
316 	if (emif_base == EMIF1_BASE)
317 		writel(ioregs->ctrl_emif_sdram_config_ext_final,
318 		       (*ctrl)->control_emif1_sdram_config_ext);
319 	else if (emif_base == EMIF2_BASE)
320 		writel(ioregs->ctrl_emif_sdram_config_ext_final,
321 		       (*ctrl)->control_emif2_sdram_config_ext);
322 }
323 
324 void init_cpu_configuration(void)
325 {
326 	u32 l2actlr;
327 
328 	asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r"(l2actlr));
329 	/*
330 	 * L2ACTLR: Ensure to enable the following:
331 	 * 3: Disable clean/evict push to external
332 	 * 4: Disable WriteUnique and WriteLineUnique transactions from master
333 	 * 8: Disable DVM/CMO message broadcast
334 	 */
335 	l2actlr |= 0x118;
336 	omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2actlr);
337 }
338 
339 void init_omap_revision(void)
340 {
341 	/*
342 	 * For some of the ES2/ES1 boards ID_CODE is not reliable:
343 	 * Also, ES1 and ES2 have different ARM revisions
344 	 * So use ARM revision for identification
345 	 */
346 	unsigned int rev = cortex_rev();
347 
348 	switch (readl(CONTROL_ID_CODE)) {
349 	case OMAP5430_CONTROL_ID_CODE_ES1_0:
350 		*omap_si_rev = OMAP5430_ES1_0;
351 		if (rev == MIDR_CORTEX_A15_R2P2)
352 			*omap_si_rev = OMAP5430_ES2_0;
353 		break;
354 	case OMAP5432_CONTROL_ID_CODE_ES1_0:
355 		*omap_si_rev = OMAP5432_ES1_0;
356 		if (rev == MIDR_CORTEX_A15_R2P2)
357 			*omap_si_rev = OMAP5432_ES2_0;
358 		break;
359 	case OMAP5430_CONTROL_ID_CODE_ES2_0:
360 		*omap_si_rev = OMAP5430_ES2_0;
361 		break;
362 	case OMAP5432_CONTROL_ID_CODE_ES2_0:
363 		*omap_si_rev = OMAP5432_ES2_0;
364 		break;
365 	case DRA752_CONTROL_ID_CODE_ES1_0:
366 		*omap_si_rev = DRA752_ES1_0;
367 		break;
368 	case DRA752_CONTROL_ID_CODE_ES1_1:
369 		*omap_si_rev = DRA752_ES1_1;
370 		break;
371 	case DRA752_CONTROL_ID_CODE_ES2_0:
372 		*omap_si_rev = DRA752_ES2_0;
373 		break;
374 	case DRA722_CONTROL_ID_CODE_ES1_0:
375 		*omap_si_rev = DRA722_ES1_0;
376 		break;
377 	case DRA722_CONTROL_ID_CODE_ES2_0:
378 		*omap_si_rev = DRA722_ES2_0;
379 		break;
380 	default:
381 		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
382 	}
383 	init_cpu_configuration();
384 }
385 
386 void omap_die_id(unsigned int *die_id)
387 {
388 	die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
389 	die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1);
390 	die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2);
391 	die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3);
392 }
393 
394 void reset_cpu(ulong ignored)
395 {
396 	u32 omap_rev = omap_revision();
397 
398 	/*
399 	 * WARM reset is not functional in case of OMAP5430 ES1.0 soc.
400 	 * So use cold reset in case instead.
401 	 */
402 	if (omap_rev == OMAP5430_ES1_0)
403 		writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl);
404 	else
405 		writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl);
406 }
407 
408 u32 warm_reset(void)
409 {
410 	return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
411 }
412 
413 void setup_warmreset_time(void)
414 {
415 	u32 rst_time, rst_val;
416 
417 	/*
418 	 * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff.
419 	 * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles
420 	 * into microsec and passing the value.
421 	 */
422 	rst_time = usec_to_32k(CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC)
423 		<< RSTTIME1_SHIFT;
424 
425 	if (rst_time > RSTTIME1_MASK)
426 		rst_time = RSTTIME1_MASK;
427 
428 	rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK;
429 	rst_val |= rst_time;
430 	writel(rst_val, (*prcm)->prm_rsttime);
431 }
432 
433 void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
434 				 u32 cpu_rev_comb, u32 cpu_variant,
435 				 u32 cpu_rev)
436 {
437 	omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2auxctrl);
438 }
439 
440 void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
441 			  u32 cpu_variant, u32 cpu_rev)
442 {
443 
444 #ifdef CONFIG_ARM_ERRATA_801819
445 	/*
446 	 * DRA72x processors are uniprocessors and DONOT have
447 	 * ACP (Accelerator Coherency Port) hooked to ACE (AXI Coherency
448 	 * Extensions) Hence the erratum workaround is not applicable for
449 	 * DRA72x processors.
450 	 */
451 	if (is_dra72x())
452 		acr &= ~((0x3 << 23) | (0x3 << 25));
453 #endif
454 	omap_smc1(OMAP5_SERVICE_ACR_SET, acr);
455 }
456 
457 #if defined(CONFIG_PALMAS_POWER)
458 void vmmc_pbias_config(uint voltage)
459 {
460 	u32 value = 0;
461 	struct vcores_data const *vcores = *omap_vcores;
462 
463 	value = readl((*ctrl)->control_pbias);
464 	value &= ~SDCARD_PWRDNZ;
465 	writel(value, (*ctrl)->control_pbias);
466 	udelay(10); /* wait 10 us */
467 	value &= ~SDCARD_BIAS_PWRDNZ;
468 	writel(value, (*ctrl)->control_pbias);
469 
470 	if (vcores->core.pmic->i2c_slave_addr == 0x60) {
471 		if (voltage == LDO_VOLT_3V0)
472 			voltage = 0x19;
473 		else if (voltage == LDO_VOLT_1V8)
474 			voltage = 0xa;
475 		lp873x_mmc1_poweron_ldo(voltage);
476 	} else {
477 		palmas_mmc1_poweron_ldo(voltage);
478 	}
479 
480 	value = readl((*ctrl)->control_pbias);
481 	value |= SDCARD_BIAS_PWRDNZ;
482 	writel(value, (*ctrl)->control_pbias);
483 	udelay(150); /* wait 150 us */
484 	value |= SDCARD_PWRDNZ;
485 	writel(value, (*ctrl)->control_pbias);
486 	udelay(150); /* wait 150 us */
487 }
488 #endif
489