1 /*
2  *
3  * HW data initialization for OMAP5
4  *
5  * (C) Copyright 2013
6  * Texas Instruments, <www.ti.com>
7  *
8  * Sricharan R <r.sricharan@ti.com>
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 #include <common.h>
13 #include <palmas.h>
14 #include <asm/arch/omap.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/omap_common.h>
17 #include <asm/arch/clock.h>
18 #include <asm/omap_gpio.h>
19 #include <asm/io.h>
20 #include <asm/emif.h>
21 
22 struct prcm_regs const **prcm =
23 			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
24 struct dplls const **dplls_data =
25 			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
26 struct vcores_data const **omap_vcores =
27 		(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
28 struct omap_sys_ctrl_regs const **ctrl =
29 	(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
30 
31 /* OPP NOM FREQUENCY for ES1.0 */
32 static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
33 	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
34 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
35 	{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
36 	{375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
37 	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
38 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
39 	{375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
40 };
41 
42 /* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */
43 static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
44 	{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
45 	{500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
46 	{119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
47 	{625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
48 	{500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
49 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
50 	{625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
51 };
52 
53 static const struct dpll_params
54 			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
55 	{266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 12 MHz   */
56 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
57 	{443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 16.8 MHz */
58 	{277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 19.2 MHz */
59 	{368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1},		/* 26 MHz   */
60 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
61 	{277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}		/* 38.4 MHz */
62 };
63 
64 static const struct dpll_params
65 			core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
66 	{266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 12 MHz   */
67 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
68 	{443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 16.8 MHz */
69 	{277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 19.2 MHz */
70 	{368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6},		/* 26 MHz   */
71 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
72 	{277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}		/* 38.4 MHz */
73 };
74 
75 static const struct dpll_params
76 		core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
77 	{266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 12 MHz   */
78 	{266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 20 MHz   */
79 	{443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 16.8 MHz */
80 	{277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 19.2 MHz */
81 	{368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 26 MHz   */
82 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
83 	{277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 38.4 MHz */
84 };
85 
86 static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
87 	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 12 MHz   */
88 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
89 	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 16.8 MHz */
90 	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 19.2 MHz */
91 	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1},		/* 26 MHz   */
92 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
93 	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}		/* 38.4 MHz */
94 };
95 
96 static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
97 	{32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 12 MHz   */
98 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
99 	{160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 16.8 MHz */
100 	{20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 19.2 MHz */
101 	{192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1},		/* 26 MHz   */
102 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
103 	{10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}		/* 38.4 MHz */
104 };
105 
106 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
107 	{32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 12 MHz   */
108 	{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 20 MHz   */
109 	{160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 16.8 MHz */
110 	{20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 19.2 MHz */
111 	{192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 26 MHz   */
112 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
113 	{10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 38.4 MHz */
114 };
115 
116 static const struct dpll_params per_dpll_params_768mhz_dra76x[NUM_SYS_CLKS] = {
117 	{32, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 12 MHz   */
118 	{96, 4, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 20 MHz   */
119 	{160, 6, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 16.8 MHz */
120 	{20, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 19.2 MHz */
121 	{192, 12, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 26 MHz   */
122 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
123 	{10, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1},		/* 38.4 MHz */
124 };
125 
126 static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
127 	{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
128 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
129 	{208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
130 	{182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
131 	{224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
132 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
133 	{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
134 };
135 
136 static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
137 	{1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
138 	{233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz */
139 	{208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
140 	{182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
141 	{224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
142 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
143 	{91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
144 };
145 
146 /* ABE M & N values with sys_clk as source */
147 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
148 static const struct dpll_params
149 		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
150 	{49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
151 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
152 	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
153 	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
154 	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
155 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
156 	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
157 };
158 #endif
159 
160 /* ABE M & N values with 32K clock as source */
161 #ifndef CONFIG_SYS_OMAP_ABE_SYSCK
162 static const struct dpll_params abe_dpll_params_32k_196608khz = {
163 	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
164 };
165 #endif
166 
167 /* ABE M & N values with sysclk2(22.5792 MHz) as input */
168 static const struct dpll_params
169 		abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
170 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
171 	{16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
172 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
173 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
174 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
175 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
176 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
177 };
178 
179 static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
180 	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
181 	{480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 20 MHz   */
182 	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
183 	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
184 	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
185 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
186 	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
187 };
188 
189 static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = {
190 	{111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
191 	{333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
192 	{555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
193 	{555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
194 	{666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
195 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
196 	{555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
197 };
198 
199 static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
200 	{266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
201 	{266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
202 	{190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
203 	{665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
204 	{532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
205 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
206 	{665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
207 };
208 
209 static const struct dpll_params gmac_dpll_params_2000mhz[NUM_SYS_CLKS] = {
210 	{250, 2, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},		/* 12 MHz   */
211 	{250, 4, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},		/* 20 MHz   */
212 	{119, 1, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},		/* 16.8 MHz */
213 	{625, 11, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},	/* 19.2 MHz */
214 	{500, 12, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},	/* 26 MHz   */
215 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
216 	{625, 23, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1},	/* 38.4 MHz */
217 };
218 
219 struct dplls omap5_dplls_es1 = {
220 	.mpu = mpu_dpll_params_800mhz,
221 	.core = core_dpll_params_2128mhz_ddr532,
222 	.per = per_dpll_params_768mhz,
223 	.iva = iva_dpll_params_2330mhz,
224 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
225 	.abe = abe_dpll_params_sysclk_196608khz,
226 #else
227 	.abe = &abe_dpll_params_32k_196608khz,
228 #endif
229 	.usb = usb_dpll_params_1920mhz,
230 	.ddr = NULL
231 };
232 
233 struct dplls omap5_dplls_es2 = {
234 	.mpu = mpu_dpll_params_1ghz,
235 	.core = core_dpll_params_2128mhz_ddr532_es2,
236 	.per = per_dpll_params_768mhz_es2,
237 	.iva = iva_dpll_params_2330mhz,
238 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
239 	.abe = abe_dpll_params_sysclk_196608khz,
240 #else
241 	.abe = &abe_dpll_params_32k_196608khz,
242 #endif
243 	.usb = usb_dpll_params_1920mhz,
244 	.ddr = NULL
245 };
246 
247 struct dplls dra76x_dplls = {
248 	.mpu = mpu_dpll_params_1ghz,
249 	.core = core_dpll_params_2128mhz_dra7xx,
250 	.per = per_dpll_params_768mhz_dra76x,
251 	.abe = abe_dpll_params_sysclk2_361267khz,
252 	.iva = iva_dpll_params_2330mhz_dra7xx,
253 	.usb = usb_dpll_params_1920mhz,
254 	.ddr =	ddr_dpll_params_2664mhz,
255 	.gmac = gmac_dpll_params_2000mhz,
256 };
257 
258 struct dplls dra7xx_dplls = {
259 	.mpu = mpu_dpll_params_1ghz,
260 	.core = core_dpll_params_2128mhz_dra7xx,
261 	.per = per_dpll_params_768mhz_dra7xx,
262 	.abe = abe_dpll_params_sysclk2_361267khz,
263 	.iva = iva_dpll_params_2330mhz_dra7xx,
264 	.usb = usb_dpll_params_1920mhz,
265 	.ddr = ddr_dpll_params_2128mhz,
266 	.gmac = gmac_dpll_params_2000mhz,
267 };
268 
269 struct dplls dra72x_dplls = {
270 	.mpu = mpu_dpll_params_1ghz,
271 	.core = core_dpll_params_2128mhz_dra7xx,
272 	.per = per_dpll_params_768mhz_dra7xx,
273 	.abe = abe_dpll_params_sysclk2_361267khz,
274 	.iva = iva_dpll_params_2330mhz_dra7xx,
275 	.usb = usb_dpll_params_1920mhz,
276 	.ddr =	ddr_dpll_params_2664mhz,
277 	.gmac = gmac_dpll_params_2000mhz,
278 };
279 
280 struct pmic_data palmas = {
281 	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
282 	.step = 10000, /* 10 mV represented in uV */
283 	/*
284 	 * Offset codes 1-6 all give the base voltage in Palmas
285 	 * Offset code 0 switches OFF the SMPS
286 	 */
287 	.start_code = 6,
288 	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
289 	.pmic_bus_init	= sri2c_init,
290 	.pmic_write	= omap_vc_bypass_send_value,
291 	.gpio_en = 0,
292 };
293 
294 /* The TPS659038 and TPS65917 are software-compatible, use common struct */
295 struct pmic_data tps659038 = {
296 	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
297 	.step = 10000, /* 10 mV represented in uV */
298 	/*
299 	 * Offset codes 1-6 all give the base voltage in Palmas
300 	 * Offset code 0 switches OFF the SMPS
301 	 */
302 	.start_code = 6,
303 	.i2c_slave_addr	= TPS659038_I2C_SLAVE_ADDR,
304 	.pmic_bus_init	= gpi2c_init,
305 	.pmic_write	= palmas_i2c_write_u8,
306 	.gpio_en = 0,
307 };
308 
309 /* The LP87565*/
310 struct pmic_data lp87565 = {
311 	.base_offset = LP873X_BUCK_BASE_VOLT_UV,
312 	.step = 5000, /* 5 mV represented in uV */
313 	/*
314 	 * Offset codes 0 - 0x13 Invalid.
315 	 * Offset codes 0x14 0x17 give 10mV steps
316 	 * Offset codes 0x17 through 0x9D give 5mV steps
317 	 * So let us start with our operating range from .73V
318 	 */
319 	.start_code = 0x17,
320 	.i2c_slave_addr = 0x60,
321 	.pmic_bus_init  = gpi2c_init,
322 	.pmic_write     = palmas_i2c_write_u8,
323 };
324 
325 /* The LP8732 and LP8733 are software-compatible, use common struct */
326 struct pmic_data lp8733 = {
327 	.base_offset = LP873X_BUCK_BASE_VOLT_UV,
328 	.step = 5000, /* 5 mV represented in uV */
329 	/*
330 	 * Offset codes 0 - 0x13 Invalid.
331 	 * Offset codes 0x14 0x17 give 10mV steps
332 	 * Offset codes 0x17 through 0x9D give 5mV steps
333 	 * So let us start with our operating range from .73V
334 	 */
335 	.start_code = 0x17,
336 	.i2c_slave_addr = 0x60,
337 	.pmic_bus_init  = gpi2c_init,
338 	.pmic_write     = palmas_i2c_write_u8,
339 };
340 
341 struct vcores_data omap5430_volts = {
342 	.mpu.value[OPP_NOM] = VDD_MPU,
343 	.mpu.addr = SMPS_REG_ADDR_12_MPU,
344 	.mpu.pmic = &palmas,
345 
346 	.core.value[OPP_NOM] = VDD_CORE,
347 	.core.addr = SMPS_REG_ADDR_8_CORE,
348 	.core.pmic = &palmas,
349 
350 	.mm.value[OPP_NOM] = VDD_MM,
351 	.mm.addr = SMPS_REG_ADDR_45_IVA,
352 	.mm.pmic = &palmas,
353 };
354 
355 struct vcores_data omap5430_volts_es2 = {
356 	.mpu.value[OPP_NOM] = VDD_MPU_ES2,
357 	.mpu.addr = SMPS_REG_ADDR_12_MPU,
358 	.mpu.pmic = &palmas,
359 	.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
360 
361 	.core.value[OPP_NOM] = VDD_CORE_ES2,
362 	.core.addr = SMPS_REG_ADDR_8_CORE,
363 	.core.pmic = &palmas,
364 
365 	.mm.value[OPP_NOM] = VDD_MM_ES2,
366 	.mm.addr = SMPS_REG_ADDR_45_IVA,
367 	.mm.pmic = &palmas,
368 	.mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,
369 
370 	.mpu.efuse.reg[OPP_NOM]	= OMAP5_ES2_PROD_MPU_OPNO_VMIN,
371 	.mpu.efuse.reg_bits	= OMAP5_ES2_PROD_REGBITS,
372 
373 	.core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN,
374 	.core.efuse.reg_bits	= OMAP5_ES2_PROD_REGBITS,
375 
376 	.mm.efuse.reg[OPP_NOM]	= OMAP5_ES2_PROD_MM_OPNO_VMIN,
377 	.mm.efuse.reg_bits	= OMAP5_ES2_PROD_REGBITS,
378 };
379 
380 /*
381  * Enable essential clock domains, modules and
382  * do some additional special settings needed
383  */
384 void enable_basic_clocks(void)
385 {
386 	u32 const clk_domains_essential[] = {
387 		(*prcm)->cm_l4per_clkstctrl,
388 		(*prcm)->cm_l3init_clkstctrl,
389 		(*prcm)->cm_memif_clkstctrl,
390 		(*prcm)->cm_l4cfg_clkstctrl,
391 #ifdef CONFIG_DRIVER_TI_CPSW
392 		(*prcm)->cm_gmac_clkstctrl,
393 #endif
394 		0
395 	};
396 
397 	u32 const clk_modules_hw_auto_essential[] = {
398 		(*prcm)->cm_l3_gpmc_clkctrl,
399 		(*prcm)->cm_memif_emif_1_clkctrl,
400 		(*prcm)->cm_memif_emif_2_clkctrl,
401 		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
402 		(*prcm)->cm_wkup_gpio1_clkctrl,
403 		(*prcm)->cm_l4per_gpio2_clkctrl,
404 		(*prcm)->cm_l4per_gpio3_clkctrl,
405 		(*prcm)->cm_l4per_gpio4_clkctrl,
406 		(*prcm)->cm_l4per_gpio5_clkctrl,
407 		(*prcm)->cm_l4per_gpio6_clkctrl,
408 		(*prcm)->cm_l4per_gpio7_clkctrl,
409 		(*prcm)->cm_l4per_gpio8_clkctrl,
410 #ifdef CONFIG_SCSI_AHCI_PLAT
411 		(*prcm)->cm_l3init_ocp2scp3_clkctrl,
412 #endif
413 		0
414 	};
415 
416 	u32 const clk_modules_explicit_en_essential[] = {
417 		(*prcm)->cm_wkup_gptimer1_clkctrl,
418 		(*prcm)->cm_l3init_hsmmc1_clkctrl,
419 		(*prcm)->cm_l3init_hsmmc2_clkctrl,
420 		(*prcm)->cm_l4per_gptimer2_clkctrl,
421 		(*prcm)->cm_wkup_wdtimer2_clkctrl,
422 		(*prcm)->cm_l4per_uart3_clkctrl,
423 		(*prcm)->cm_l4per_i2c1_clkctrl,
424 #ifdef CONFIG_DRIVER_TI_CPSW
425 		(*prcm)->cm_gmac_gmac_clkctrl,
426 #endif
427 
428 #ifdef CONFIG_TI_QSPI
429 		(*prcm)->cm_l4per_qspi_clkctrl,
430 #endif
431 #ifdef CONFIG_SCSI_AHCI_PLAT
432 		(*prcm)->cm_l3init_sata_clkctrl,
433 #endif
434 		0
435 	};
436 
437 	/* Enable optional additional functional clock for GPIO4 */
438 	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
439 			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
440 
441 	/* Enable 96 MHz clock for MMC1 & MMC2 */
442 	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
443 			HSMMC_CLKCTRL_CLKSEL_MASK);
444 	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
445 			HSMMC_CLKCTRL_CLKSEL_MASK);
446 
447 	/* Set the correct clock dividers for mmc */
448 	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
449 			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
450 	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
451 			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
452 
453 	/* Select 32KHz clock as the source of GPTIMER1 */
454 	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
455 			GPTIMER1_CLKCTRL_CLKSEL_MASK);
456 
457 	do_enable_clocks(clk_domains_essential,
458 			 clk_modules_hw_auto_essential,
459 			 clk_modules_explicit_en_essential,
460 			 1);
461 
462 #ifdef CONFIG_TI_QSPI
463 	setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
464 #endif
465 
466 #ifdef CONFIG_SCSI_AHCI_PLAT
467 	/* Enable optional functional clock for SATA */
468 	setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
469 		     SATA_CLKCTRL_OPTFCLKEN_MASK);
470 #endif
471 
472 	/* Enable SCRM OPT clocks for PER and CORE dpll */
473 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
474 			OPTFCLKEN_SCRM_PER_MASK);
475 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
476 			OPTFCLKEN_SCRM_CORE_MASK);
477 }
478 
479 void enable_basic_uboot_clocks(void)
480 {
481 	u32 const clk_domains_essential[] = {
482 #if defined(CONFIG_DRA7XX)
483 		(*prcm)->cm_ipu_clkstctrl,
484 #endif
485 		0
486 	};
487 
488 	u32 const clk_modules_hw_auto_essential[] = {
489 		(*prcm)->cm_l3init_hsusbtll_clkctrl,
490 		0
491 	};
492 
493 	u32 const clk_modules_explicit_en_essential[] = {
494 		(*prcm)->cm_l4per_mcspi1_clkctrl,
495 		(*prcm)->cm_l4per_i2c2_clkctrl,
496 		(*prcm)->cm_l4per_i2c3_clkctrl,
497 		(*prcm)->cm_l4per_i2c4_clkctrl,
498 #if defined(CONFIG_DRA7XX)
499 		(*prcm)->cm_ipu_i2c5_clkctrl,
500 #else
501 		(*prcm)->cm_l4per_i2c5_clkctrl,
502 #endif
503 		(*prcm)->cm_l3init_hsusbhost_clkctrl,
504 		(*prcm)->cm_l3init_fsusb_clkctrl,
505 		0
506 	};
507 	do_enable_clocks(clk_domains_essential,
508 			 clk_modules_hw_auto_essential,
509 			 clk_modules_explicit_en_essential,
510 			 1);
511 }
512 
513 #ifdef CONFIG_TI_EDMA3
514 void enable_edma3_clocks(void)
515 {
516 	u32 const clk_domains_edma3[] = {
517 		0
518 	};
519 
520 	u32 const clk_modules_hw_auto_edma3[] = {
521 		(*prcm)->cm_l3main1_tptc1_clkctrl,
522 		(*prcm)->cm_l3main1_tptc2_clkctrl,
523 		0
524 	};
525 
526 	u32 const clk_modules_explicit_en_edma3[] = {
527 		0
528 	};
529 
530 	do_enable_clocks(clk_domains_edma3,
531 			 clk_modules_hw_auto_edma3,
532 			 clk_modules_explicit_en_edma3,
533 			 1);
534 }
535 
536 void disable_edma3_clocks(void)
537 {
538 	u32 const clk_domains_edma3[] = {
539 		0
540 	};
541 
542 	u32 const clk_modules_disable_edma3[] = {
543 		(*prcm)->cm_l3main1_tptc1_clkctrl,
544 		(*prcm)->cm_l3main1_tptc2_clkctrl,
545 		0
546 	};
547 
548 	do_disable_clocks(clk_domains_edma3,
549 			  clk_modules_disable_edma3,
550 			  1);
551 }
552 #endif
553 
554 #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
555 void enable_usb_clocks(int index)
556 {
557 	u32 cm_l3init_usb_otg_ss_clkctrl = 0;
558 
559 	if (index == 0) {
560 		cm_l3init_usb_otg_ss_clkctrl =
561 			(*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
562 		/* Enable 960 MHz clock for dwc3 */
563 		setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
564 			     OPTFCLKEN_REFCLK960M);
565 
566 		/* Enable 32 KHz clock for USB_PHY1 */
567 		setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
568 			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
569 
570 		/* Enable 32 KHz clock for USB_PHY3 */
571 		if (is_dra7xx())
572 			setbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
573 				     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
574 	} else if (index == 1) {
575 		cm_l3init_usb_otg_ss_clkctrl =
576 			(*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
577 		/* Enable 960 MHz clock for dwc3 */
578 		setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
579 			     OPTFCLKEN_REFCLK960M);
580 
581 		/* Enable 32 KHz clock for dwc3 */
582 		setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
583 			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
584 
585 		/* Enable 60 MHz clock for USB2PHY2 */
586 		setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
587 			     L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
588 	}
589 
590 	u32 const clk_domains_usb[] = {
591 		0
592 	};
593 
594 	u32 const clk_modules_hw_auto_usb[] = {
595 		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
596 		cm_l3init_usb_otg_ss_clkctrl,
597 		0
598 	};
599 
600 	u32 const clk_modules_explicit_en_usb[] = {
601 		0
602 	};
603 
604 	do_enable_clocks(clk_domains_usb,
605 			 clk_modules_hw_auto_usb,
606 			 clk_modules_explicit_en_usb,
607 			 1);
608 }
609 
610 void disable_usb_clocks(int index)
611 {
612 	u32 cm_l3init_usb_otg_ss_clkctrl = 0;
613 
614 	if (index == 0) {
615 		cm_l3init_usb_otg_ss_clkctrl =
616 			(*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
617 		/* Disable 960 MHz clock for dwc3 */
618 		clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
619 			     OPTFCLKEN_REFCLK960M);
620 
621 		/* Disable 32 KHz clock for USB_PHY1 */
622 		clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
623 			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
624 
625 		/* Disable 32 KHz clock for USB_PHY3 */
626 		if (is_dra7xx())
627 			clrbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
628 				     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
629 	} else if (index == 1) {
630 		cm_l3init_usb_otg_ss_clkctrl =
631 			(*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
632 		/* Disable 960 MHz clock for dwc3 */
633 		clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
634 			     OPTFCLKEN_REFCLK960M);
635 
636 		/* Disable 32 KHz clock for dwc3 */
637 		clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
638 			     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
639 
640 		/* Disable 60 MHz clock for USB2PHY2 */
641 		clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
642 			     L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
643 	}
644 
645 	u32 const clk_domains_usb[] = {
646 		0
647 	};
648 
649 	u32 const clk_modules_disable[] = {
650 		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
651 		cm_l3init_usb_otg_ss_clkctrl,
652 		0
653 	};
654 
655 	do_disable_clocks(clk_domains_usb,
656 			  clk_modules_disable,
657 			  1);
658 }
659 #endif
660 
661 const struct ctrl_ioregs ioregs_omap5430 = {
662 	.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
663 	.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
664 	.ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
665 	.ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
666 	.ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
667 };
668 
669 const struct ctrl_ioregs ioregs_omap5432_es1 = {
670 	.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
671 	.ctrl_lpddr2ch = 0x0,
672 	.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
673 	.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE,
674 	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
675 	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
676 	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
677 	.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
678 };
679 
680 const struct ctrl_ioregs ioregs_omap5432_es2 = {
681 	.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
682 	.ctrl_lpddr2ch = 0x0,
683 	.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
684 	.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2,
685 	.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
686 	.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
687 	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
688 	.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
689 };
690 
691 const struct ctrl_ioregs ioregs_dra7xx_es1 = {
692 	.ctrl_ddrch = 0x40404040,
693 	.ctrl_lpddr2ch = 0x40404040,
694 	.ctrl_ddr3ch = 0x80808080,
695 	.ctrl_ddrio_0 = 0x00094A40,
696 	.ctrl_ddrio_1 = 0x04A52000,
697 	.ctrl_ddrio_2 = 0x84210000,
698 	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
699 	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
700 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
701 };
702 
703 const struct ctrl_ioregs ioregs_dra72x_es1 = {
704 	.ctrl_ddrch = 0x40404040,
705 	.ctrl_lpddr2ch = 0x40404040,
706 	.ctrl_ddr3ch = 0x60606080,
707 	.ctrl_ddrio_0 = 0x00094A40,
708 	.ctrl_ddrio_1 = 0x04A52000,
709 	.ctrl_ddrio_2 = 0x84210000,
710 	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
711 	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
712 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
713 };
714 
715 const struct ctrl_ioregs ioregs_dra72x_es2 = {
716 	.ctrl_ddrch = 0x40404040,
717 	.ctrl_lpddr2ch = 0x40404040,
718 	.ctrl_ddr3ch = 0x60606060,
719 	.ctrl_ddrio_0 = 0x00094A40,
720 	.ctrl_ddrio_1 = 0x00000000,
721 	.ctrl_ddrio_2 = 0x00000000,
722 	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
723 	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
724 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
725 };
726 
727 void __weak hw_data_init(void)
728 {
729 	u32 omap_rev = omap_revision();
730 
731 	switch (omap_rev) {
732 
733 	case OMAP5430_ES1_0:
734 	case OMAP5432_ES1_0:
735 	*prcm = &omap5_es1_prcm;
736 	*dplls_data = &omap5_dplls_es1;
737 	*omap_vcores = &omap5430_volts;
738 	*ctrl = &omap5_ctrl;
739 	break;
740 
741 	case OMAP5430_ES2_0:
742 	case OMAP5432_ES2_0:
743 	*prcm = &omap5_es2_prcm;
744 	*dplls_data = &omap5_dplls_es2;
745 	*omap_vcores = &omap5430_volts_es2;
746 	*ctrl = &omap5_ctrl;
747 	break;
748 
749 	case DRA762_ES1_0:
750 	*prcm = &dra7xx_prcm;
751 	*dplls_data = &dra76x_dplls;
752 	*ctrl = &dra7xx_ctrl;
753 	break;
754 
755 	case DRA752_ES1_0:
756 	case DRA752_ES1_1:
757 	case DRA752_ES2_0:
758 	*prcm = &dra7xx_prcm;
759 	*dplls_data = &dra7xx_dplls;
760 	*ctrl = &dra7xx_ctrl;
761 	break;
762 
763 	case DRA722_ES1_0:
764 	case DRA722_ES2_0:
765 	case DRA722_ES2_1:
766 	*prcm = &dra7xx_prcm;
767 	*dplls_data = &dra72x_dplls;
768 	*ctrl = &dra7xx_ctrl;
769 	break;
770 
771 	default:
772 		printf("\n INVALID OMAP REVISION ");
773 	}
774 }
775 
776 void get_ioregs(const struct ctrl_ioregs **regs)
777 {
778 	u32 omap_rev = omap_revision();
779 
780 	switch (omap_rev) {
781 	case OMAP5430_ES1_0:
782 	case OMAP5430_ES2_0:
783 		*regs = &ioregs_omap5430;
784 		break;
785 	case OMAP5432_ES1_0:
786 		*regs = &ioregs_omap5432_es1;
787 		break;
788 	case OMAP5432_ES2_0:
789 		*regs = &ioregs_omap5432_es2;
790 		break;
791 	case DRA752_ES1_0:
792 	case DRA752_ES1_1:
793 	case DRA752_ES2_0:
794 	case DRA762_ES1_0:
795 		*regs = &ioregs_dra7xx_es1;
796 		break;
797 	case DRA722_ES1_0:
798 		*regs = &ioregs_dra72x_es1;
799 		break;
800 	case DRA722_ES2_0:
801 	case DRA722_ES2_1:
802 		*regs = &ioregs_dra72x_es2;
803 		break;
804 
805 	default:
806 		printf("\n INVALID OMAP REVISION ");
807 	}
808 }
809