1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2015 4 * Texas Instruments Incorporated, <www.ti.com> 5 * 6 * Lokesh Vutla <lokeshvutla@ti.com> 7 */ 8 9 #include <common.h> 10 #include <asm/utils.h> 11 #include <asm/arch/dra7xx_iodelay.h> 12 #include <asm/arch/omap.h> 13 #include <asm/arch/sys_proto.h> 14 #include <asm/arch/clock.h> 15 #include <asm/arch/mux_dra7xx.h> 16 #include <asm/omap_common.h> 17 18 static int isolate_io(u32 isolate) 19 { 20 if (isolate) { 21 clrsetbits_le32((*ctrl)->control_pbias, SDCARD_PWRDNZ, 22 SDCARD_PWRDNZ); 23 clrsetbits_le32((*ctrl)->control_pbias, SDCARD_BIAS_PWRDNZ, 24 SDCARD_BIAS_PWRDNZ); 25 } 26 27 /* Override control on ISOCLKIN signal to IO pad ring. */ 28 clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK, 29 PMCTRL_ISOCLK_OVERRIDE_CTRL); 30 if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, PMCTRL_ISOCLK_STATUS_MASK, 31 (u32 *)(*prcm)->prm_io_pmctrl, LDELAY)) 32 return ERR_DEISOLATE_IO << isolate; 33 34 /* Isolate/Deisolate IO */ 35 clrsetbits_le32((*ctrl)->ctrl_core_sma_sw_0, CTRL_ISOLATE_MASK, 36 isolate << CTRL_ISOLATE_SHIFT); 37 /* Dummy read to add delay t > 10ns */ 38 readl((*ctrl)->ctrl_core_sma_sw_0); 39 40 /* Return control on ISOCLKIN to hardware */ 41 clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK, 42 PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL); 43 if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, 44 0 << PMCTRL_ISOCLK_STATUS_SHIFT, 45 (u32 *)(*prcm)->prm_io_pmctrl, LDELAY)) 46 return ERR_DEISOLATE_IO << isolate; 47 48 return 0; 49 } 50 51 static int calibrate_iodelay(u32 base) 52 { 53 u32 reg; 54 55 /* Configure REFCLK period */ 56 reg = readl(base + CFG_REG_2_OFFSET); 57 reg &= ~CFG_REG_REFCLK_PERIOD_MASK; 58 reg |= CFG_REG_REFCLK_PERIOD; 59 writel(reg, base + CFG_REG_2_OFFSET); 60 61 /* Initiate Calibration */ 62 clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_CALIB_STRT_MASK, 63 CFG_REG_CALIB_STRT << CFG_REG_CALIB_STRT_SHIFT); 64 if (!wait_on_value(CFG_REG_CALIB_STRT_MASK, CFG_REG_CALIB_END, 65 (u32 *)(base + CFG_REG_0_OFFSET), LDELAY)) 66 return ERR_CALIBRATE_IODELAY; 67 68 return 0; 69 } 70 71 static int update_delay_mechanism(u32 base) 72 { 73 /* Initiate the reload of calibrated values. */ 74 clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_ROM_READ_MASK, 75 CFG_REG_ROM_READ_START); 76 if (!wait_on_value(CFG_REG_ROM_READ_MASK, CFG_REG_ROM_READ_END, 77 (u32 *)(base + CFG_REG_0_OFFSET), LDELAY)) 78 return ERR_UPDATE_DELAY; 79 80 return 0; 81 } 82 83 static u32 calculate_delay(u32 base, u16 offset, u16 den) 84 { 85 u16 refclk_period, dly_cnt, ref_cnt; 86 u32 reg, q, r; 87 88 refclk_period = readl(base + CFG_REG_2_OFFSET) & 89 CFG_REG_REFCLK_PERIOD_MASK; 90 91 reg = readl(base + offset); 92 dly_cnt = (reg & CFG_REG_DLY_CNT_MASK) >> CFG_REG_DLY_CNT_SHIFT; 93 ref_cnt = (reg & CFG_REG_REF_CNT_MASK) >> CFG_REG_REF_CNT_SHIFT; 94 95 if (!dly_cnt || !den) 96 return 0; 97 98 /* 99 * To avoid overflow and integer truncation, delay value 100 * is calculated as quotient + remainder. 101 */ 102 q = 5 * ((ref_cnt * refclk_period) / (dly_cnt * den)); 103 r = (10 * ((ref_cnt * refclk_period) % (dly_cnt * den))) / 104 (2 * dly_cnt * den); 105 106 return q + r; 107 } 108 109 static u32 get_cfg_reg(u16 a_delay, u16 g_delay, u32 cpde, u32 fpde) 110 { 111 u32 g_delay_coarse, g_delay_fine; 112 u32 a_delay_coarse, a_delay_fine; 113 u32 c_elements, f_elements; 114 u32 total_delay, reg = 0; 115 116 g_delay_coarse = g_delay / 920; 117 g_delay_fine = ((g_delay % 920) * 10) / 60; 118 119 a_delay_coarse = a_delay / cpde; 120 a_delay_fine = ((a_delay % cpde) * 10) / fpde; 121 122 c_elements = g_delay_coarse + a_delay_coarse; 123 f_elements = (g_delay_fine + a_delay_fine) / 10; 124 125 if (f_elements > 22) { 126 total_delay = c_elements * cpde + f_elements * fpde; 127 128 c_elements = total_delay / cpde; 129 f_elements = (total_delay % cpde) / fpde; 130 } 131 132 reg = (c_elements << CFG_X_COARSE_DLY_SHIFT) & CFG_X_COARSE_DLY_MASK; 133 reg |= (f_elements << CFG_X_FINE_DLY_SHIFT) & CFG_X_FINE_DLY_MASK; 134 reg |= CFG_X_SIGNATURE << CFG_X_SIGNATURE_SHIFT; 135 reg |= CFG_X_LOCK << CFG_X_LOCK_SHIFT; 136 137 return reg; 138 } 139 140 int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array, 141 int niodelays) 142 { 143 struct iodelay_cfg_entry *iodelay = (struct iodelay_cfg_entry *)array; 144 u32 reg, cpde, fpde, i; 145 146 if (!niodelays) 147 return 0; 148 149 cpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_3_OFFSET, 150 88); 151 if (!cpde) 152 return ERR_CPDE; 153 154 fpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_4_OFFSET, 155 264); 156 if (!fpde) 157 return ERR_FPDE; 158 159 for (i = 0; i < niodelays; i++, iodelay++) { 160 reg = get_cfg_reg(iodelay->a_delay, iodelay->g_delay, cpde, 161 fpde); 162 writel(reg, base + iodelay->offset); 163 } 164 165 return 0; 166 } 167 168 int __recalibrate_iodelay_start(void) 169 { 170 int ret = 0; 171 172 /* IO recalibration should be done only from SRAM */ 173 if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { 174 puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); 175 return -1; 176 } 177 178 /* unlock IODELAY CONFIG registers */ 179 writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base + 180 CFG_REG_8_OFFSET); 181 182 ret = calibrate_iodelay((*ctrl)->iodelay_config_base); 183 if (ret) 184 goto err; 185 186 ret = isolate_io(ISOLATE_IO); 187 if (ret) 188 goto err; 189 190 ret = update_delay_mechanism((*ctrl)->iodelay_config_base); 191 192 err: 193 return ret; 194 } 195 196 void __recalibrate_iodelay_end(int ret) 197 { 198 199 /* IO recalibration should be done only from SRAM */ 200 if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { 201 puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); 202 return; 203 } 204 205 if (!ret) 206 ret = isolate_io(DEISOLATE_IO); 207 208 /* lock IODELAY CONFIG registers */ 209 writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base + 210 CFG_REG_8_OFFSET); 211 212 /* 213 * UART cannot be used during IO recalibration sequence as IOs are in 214 * isolation. So error handling and debug prints are done after 215 * complete IO delay recalibration sequence 216 */ 217 switch (ret) { 218 case ERR_CALIBRATE_IODELAY: 219 puts("IODELAY: IO delay calibration sequence failed\n"); 220 break; 221 case ERR_ISOLATE_IO: 222 puts("IODELAY: Isolation of Device IOs failed\n"); 223 break; 224 case ERR_UPDATE_DELAY: 225 puts("IODELAY: Delay mechanism update with new calibrated values failed\n"); 226 break; 227 case ERR_DEISOLATE_IO: 228 puts("IODELAY: De-isolation of Device IOs failed\n"); 229 break; 230 case ERR_CPDE: 231 puts("IODELAY: CPDE calculation failed\n"); 232 break; 233 case ERR_FPDE: 234 puts("IODELAY: FPDE calculation failed\n"); 235 break; 236 case -1: 237 puts("IODELAY: Wrong Context call?\n"); 238 break; 239 default: 240 debug("IODELAY: IO delay recalibration successfully completed\n"); 241 } 242 243 return; 244 } 245 246 void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, 247 struct iodelay_cfg_entry const *iodelay, 248 int niodelays) 249 { 250 int ret = 0; 251 252 /* IO recalibration should be done only from SRAM */ 253 if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { 254 puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); 255 return; 256 } 257 258 ret = __recalibrate_iodelay_start(); 259 if (ret) 260 goto err; 261 262 /* Configure Mux settings */ 263 do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads); 264 265 /* Configure Manual IO timing modes */ 266 ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays); 267 if (ret) 268 goto err; 269 270 err: 271 __recalibrate_iodelay_end(ret); 272 273 } 274 275 void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, 276 struct iodelay_cfg_entry const *iodelay, 277 int niodelays) 278 { 279 int ret = 0; 280 281 /* unlock IODELAY CONFIG registers */ 282 writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base + 283 CFG_REG_8_OFFSET); 284 285 ret = calibrate_iodelay((*ctrl)->iodelay_config_base); 286 if (ret) 287 goto err; 288 289 ret = update_delay_mechanism((*ctrl)->iodelay_config_base); 290 291 /* Configure Mux settings */ 292 do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads); 293 294 /* Configure Manual IO timing modes */ 295 ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays); 296 if (ret) 297 goto err; 298 299 err: 300 /* lock IODELAY CONFIG registers */ 301 writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base + 302 CFG_REG_8_OFFSET); 303 } 304