1if OMAP54XX 2 3config DRA7XX 4 bool 5 help 6 DRA7xx is an OMAP based SOC with Dual Core A-15s. 7 8choice 9 prompt "OMAP5 board select" 10 optional 11 12config TARGET_CL_SOM_AM57X 13 bool "CompuLab CL-SOM-AM57x" 14 select DRA7XX 15 16config TARGET_CM_T54 17 bool "CompuLab CM-T54" 18 19config TARGET_OMAP5_UEVM 20 bool "TI OMAP5 uEVM board" 21 22config TARGET_DRA7XX_EVM 23 bool "TI DRA7XX" 24 select BOARD_LATE_INIT 25 select DRA7XX 26 select PHYS_64BIT 27 select TI_I2C_BOARD_DETECT 28 imply DM_PMIC 29 imply DM_REGULATOR 30 imply DM_REGULATOR_LP87565 31 imply DM_THERMAL 32 imply PMIC_LP87565 33 imply SCSI 34 imply SPL_THERMAL 35 imply TI_DRA7_THERMAL 36 37config TARGET_AM57XX_EVM 38 bool "AM57XX" 39 select BOARD_LATE_INIT 40 select CMD_DDR3 41 select DRA7XX 42 select TI_I2C_BOARD_DETECT 43 imply DM_THERMAL 44 imply SCSI 45 imply SPL_THERMAL 46 imply TI_DRA7_THERMAL 47 48endchoice 49 50config SYS_SOC 51 default "omap5" 52 53config OMAP_PLATFORM_RESET_TIME_MAX_USEC 54 int "Something" 55 range 0 31219 56 default 31219 57 help 58 Most OMAPs' provide a way to specify the time for which the reset 59 should be held low while the voltages and Oscillator outputs 60 stabilize. 61 This time is mostly board and PMIC dependent. Hence the boards are 62 expected to specify a pre-computed time using the above option. 63 This value can be computed using a summation of the below 3 64 parameters 65 1: Time taken by the Osciallator to stop and restart 66 2: PMIC OTP time 67 3: Voltage ramp time, which can be derived using the PMIC slew rate 68 and value of voltage ramp needed. 69 70if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM 71menu "Voltage Domain OPP selections" 72 73choice 74 prompt "MPU Voltage Domain" 75 default DRA7_MPU_OPP_NOM 76 help 77 Select the Operating Performance Point(OPP) for the MPU voltage 78 domain on DRA7xx & AM57xx SoCs. 79 80config DRA7_MPU_OPP_NOM 81 bool "OPP NOM" 82 help 83 This config option enables Normal OPP for MPU. This is the safest 84 option for booting. 85 86endchoice 87 88choice 89 prompt "DSPEVE Voltage Domain" 90 help 91 Select the Operating Performance Point(OPP) for the DSPEVE voltage 92 domain on DRA7xx & AM57xx SoCs. 93 94config DRA7_DSPEVE_OPP_NOM 95 bool "OPP NOM" 96 help 97 This config option enables Normal OPP for DSPEVE. This is the safest 98 option for booting and choose this when unsure about other OPPs . 99 100config DRA7_DSPEVE_OPP_OD 101 bool "OPP OD" 102 help 103 This config option enables Over drive OPP for DSPEVE. 104 105config DRA7_DSPEVE_OPP_HIGH 106 bool "OPP HIGH" 107 help 108 This config option enables High OPP for DSPEVE. 109 110endchoice 111 112choice 113 prompt "IVA Voltage Domain" 114 help 115 Select the Operating Performance Point(OPP) for the IVA voltage 116 domain on DRA7xx & AM57xx SoCs. 117 118config DRA7_IVA_OPP_NOM 119 bool "OPP NOM" 120 help 121 This config option enables Normal OPP for IVA. This is the safest 122 option for booting and choose this when unsure about other OPPs . 123 124config DRA7_IVA_OPP_OD 125 bool "OPP OD" 126 help 127 This config option enables Over drive OPP for IVA. 128 129config DRA7_IVA_OPP_HIGH 130 bool "OPP HIGH" 131 help 132 This config option enables High OPP for IVA. 133 134endchoice 135 136choice 137 prompt "GPU Voltage Domain" 138 help 139 Select the Operating Performance Point(OPP) for the GPU voltage 140 domain on DRA7xx & AM57xx SoCs. 141 142config DRA7_GPU_OPP_NOM 143 bool "OPP NOM" 144 help 145 This config option enables Normal OPP for GPU. This is the safest 146 option for booting and choose this when unsure about other OPPs . 147 148config DRA7_GPU_OPP_OD 149 bool "OPP OD" 150 help 151 This config option enables Over drive OPP for GPU. 152 153config DRA7_GPU_OPP_HIGH 154 bool "OPP HIGH" 155 help 156 This config option enables High OPP for GPU. 157 158endchoice 159 160endmenu 161endif 162 163source "board/compulab/cl-som-am57x/Kconfig" 164source "board/compulab/cm_t54/Kconfig" 165source "board/ti/omap5_uevm/Kconfig" 166source "board/ti/dra7xx/Kconfig" 167source "board/ti/am57xx/Kconfig" 168 169endif 170