1if OMAP54XX 2 3config DRA7XX 4 bool 5 help 6 DRA7xx is an OMAP based SOC with Dual Core A-15s. 7 8choice 9 prompt "OMAP5 board select" 10 optional 11 12config TARGET_CL_SOM_AM57X 13 bool "CompuLab CL-SOM-AM57x" 14 select DRA7XX 15 16config TARGET_CM_T54 17 bool "CompuLab CM-T54" 18 19config TARGET_OMAP5_UEVM 20 bool "TI OMAP5 uEVM board" 21 22config TARGET_DRA7XX_EVM 23 bool "TI DRA7XX" 24 select BOARD_LATE_INIT 25 select DRA7XX 26 select TI_I2C_BOARD_DETECT 27 select PHYS_64BIT 28 imply SCSI 29 imply DM_PMIC 30 imply PMIC_LP87565 31 imply DM_REGULATOR 32 imply DM_REGULATOR_LP87565 33 imply SPL_THERMAL 34 imply DM_THERMAL 35 imply TI_DRA7_THERMAL 36 37config TARGET_AM57XX_EVM 38 bool "AM57XX" 39 select BOARD_LATE_INIT 40 select DRA7XX 41 select TI_I2C_BOARD_DETECT 42 imply SCSI 43 imply SPL_THERMAL 44 imply DM_THERMAL 45 imply TI_DRA7_THERMAL 46 47endchoice 48 49config SYS_SOC 50 default "omap5" 51 52config OMAP_PLATFORM_RESET_TIME_MAX_USEC 53 int "Something" 54 range 0 31219 55 default 31219 56 help 57 Most OMAPs' provide a way to specify the time for which the reset 58 should be held low while the voltages and Oscillator outputs 59 stabilize. 60 This time is mostly board and PMIC dependent. Hence the boards are 61 expected to specify a pre-computed time using the above option. 62 This value can be computed using a summation of the below 3 63 parameters 64 1: Time taken by the Osciallator to stop and restart 65 2: PMIC OTP time 66 3: Voltage ramp time, which can be derived using the PMIC slew rate 67 and value of voltage ramp needed. 68 69if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM 70menu "Voltage Domain OPP selections" 71 72choice 73 prompt "MPU Voltage Domain" 74 default DRA7_MPU_OPP_NOM 75 help 76 Select the Operating Performance Point(OPP) for the MPU voltage 77 domain on DRA7xx & AM57xx SoCs. 78 79config DRA7_MPU_OPP_NOM 80 bool "OPP NOM" 81 help 82 This config option enables Normal OPP for MPU. This is the safest 83 option for booting. 84 85endchoice 86 87choice 88 prompt "DSPEVE Voltage Domain" 89 help 90 Select the Operating Performance Point(OPP) for the DSPEVE voltage 91 domain on DRA7xx & AM57xx SoCs. 92 93config DRA7_DSPEVE_OPP_NOM 94 bool "OPP NOM" 95 help 96 This config option enables Normal OPP for DSPEVE. This is the safest 97 option for booting and choose this when unsure about other OPPs . 98 99config DRA7_DSPEVE_OPP_OD 100 bool "OPP OD" 101 help 102 This config option enables Over drive OPP for DSPEVE. 103 104config DRA7_DSPEVE_OPP_HIGH 105 bool "OPP HIGH" 106 help 107 This config option enables High OPP for DSPEVE. 108 109endchoice 110 111choice 112 prompt "IVA Voltage Domain" 113 help 114 Select the Operating Performance Point(OPP) for the IVA voltage 115 domain on DRA7xx & AM57xx SoCs. 116 117config DRA7_IVA_OPP_NOM 118 bool "OPP NOM" 119 help 120 This config option enables Normal OPP for IVA. This is the safest 121 option for booting and choose this when unsure about other OPPs . 122 123config DRA7_IVA_OPP_OD 124 bool "OPP OD" 125 help 126 This config option enables Over drive OPP for IVA. 127 128config DRA7_IVA_OPP_HIGH 129 bool "OPP HIGH" 130 help 131 This config option enables High OPP for IVA. 132 133endchoice 134 135choice 136 prompt "GPU Voltage Domain" 137 help 138 Select the Operating Performance Point(OPP) for the GPU voltage 139 domain on DRA7xx & AM57xx SoCs. 140 141config DRA7_GPU_OPP_NOM 142 bool "OPP NOM" 143 help 144 This config option enables Normal OPP for GPU. This is the safest 145 option for booting and choose this when unsure about other OPPs . 146 147config DRA7_GPU_OPP_OD 148 bool "OPP OD" 149 help 150 This config option enables Over drive OPP for GPU. 151 152config DRA7_GPU_OPP_HIGH 153 bool "OPP HIGH" 154 help 155 This config option enables High OPP for GPU. 156 157endchoice 158 159endmenu 160endif 161 162source "board/compulab/cl-som-am57x/Kconfig" 163source "board/compulab/cm_t54/Kconfig" 164source "board/ti/omap5_uevm/Kconfig" 165source "board/ti/dra7xx/Kconfig" 166source "board/ti/am57xx/Kconfig" 167 168endif 169