1if OMAP54XX 2 3config DRA7XX 4 bool 5 help 6 DRA7xx is an OMAP based SOC with Dual Core A-15s. 7 8choice 9 prompt "OMAP5 board select" 10 optional 11 12config TARGET_CL_SOM_AM57X 13 bool "CompuLab CL-SOM-AM57x" 14 select DRA7XX 15 16config TARGET_CM_T54 17 bool "CompuLab CM-T54" 18 19config TARGET_OMAP5_UEVM 20 bool "TI OMAP5 uEVM board" 21 22config TARGET_DRA7XX_EVM 23 bool "TI DRA7XX" 24 select BOARD_LATE_INIT 25 select DRA7XX 26 select TI_I2C_BOARD_DETECT 27 select PHYS_64BIT 28 imply SCSI 29 30config TARGET_AM57XX_EVM 31 bool "AM57XX" 32 select BOARD_LATE_INIT 33 select DRA7XX 34 select TI_I2C_BOARD_DETECT 35 imply SCSI 36 37endchoice 38 39config SYS_SOC 40 default "omap5" 41 42config OMAP_PLATFORM_RESET_TIME_MAX_USEC 43 int "Something" 44 range 0 31219 45 default 31219 46 help 47 Most OMAPs' provide a way to specify the time for which the reset 48 should be held low while the voltages and Oscillator outputs 49 stabilize. 50 This time is mostly board and PMIC dependent. Hence the boards are 51 expected to specify a pre-computed time using the above option. 52 This value can be computed using a summation of the below 3 53 parameters 54 1: Time taken by the Osciallator to stop and restart 55 2: PMIC OTP time 56 3: Voltage ramp time, which can be derived using the PMIC slew rate 57 and value of voltage ramp needed. 58 59if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM 60menu "Voltage Domain OPP selections" 61 62choice 63 prompt "MPU Voltage Domain" 64 default DRA7_MPU_OPP_NOM 65 help 66 Select the Operating Performance Point(OPP) for the MPU voltage 67 domain on DRA7xx & AM57xx SoCs. 68 69config DRA7_MPU_OPP_NOM 70 bool "OPP NOM" 71 help 72 This config option enables Normal OPP for MPU. This is the safest 73 option for booting. 74 75endchoice 76 77choice 78 prompt "DSPEVE Voltage Domain" 79 help 80 Select the Operating Performance Point(OPP) for the DSPEVE voltage 81 domain on DRA7xx & AM57xx SoCs. 82 83config DRA7_DSPEVE_OPP_NOM 84 bool "OPP NOM" 85 help 86 This config option enables Normal OPP for DSPEVE. This is the safest 87 option for booting and choose this when unsure about other OPPs . 88 89config DRA7_DSPEVE_OPP_OD 90 bool "OPP OD" 91 help 92 This config option enables Over drive OPP for DSPEVE. 93 94config DRA7_DSPEVE_OPP_HIGH 95 bool "OPP HIGH" 96 help 97 This config option enables High OPP for DSPEVE. 98 99endchoice 100 101choice 102 prompt "IVA Voltage Domain" 103 help 104 Select the Operating Performance Point(OPP) for the IVA voltage 105 domain on DRA7xx & AM57xx SoCs. 106 107config DRA7_IVA_OPP_NOM 108 bool "OPP NOM" 109 help 110 This config option enables Normal OPP for IVA. This is the safest 111 option for booting and choose this when unsure about other OPPs . 112 113config DRA7_IVA_OPP_OD 114 bool "OPP OD" 115 help 116 This config option enables Over drive OPP for IVA. 117 118config DRA7_IVA_OPP_HIGH 119 bool "OPP HIGH" 120 help 121 This config option enables High OPP for IVA. 122 123endchoice 124 125choice 126 prompt "GPU Voltage Domain" 127 help 128 Select the Operating Performance Point(OPP) for the GPU voltage 129 domain on DRA7xx & AM57xx SoCs. 130 131config DRA7_GPU_OPP_NOM 132 bool "OPP NOM" 133 help 134 This config option enables Normal OPP for GPU. This is the safest 135 option for booting and choose this when unsure about other OPPs . 136 137config DRA7_GPU_OPP_OD 138 bool "OPP OD" 139 help 140 This config option enables Over drive OPP for GPU. 141 142config DRA7_GPU_OPP_HIGH 143 bool "OPP HIGH" 144 help 145 This config option enables High OPP for GPU. 146 147endchoice 148 149endmenu 150endif 151 152source "board/compulab/cl-som-am57x/Kconfig" 153source "board/compulab/cm_t54/Kconfig" 154source "board/ti/omap5_uevm/Kconfig" 155source "board/ti/dra7xx/Kconfig" 156source "board/ti/am57xx/Kconfig" 157 158endif 159