1if OMAP54XX 2 3config DRA7XX 4 bool 5 help 6 DRA7xx is an OMAP based SOC with Dual Core A-15s. 7 8choice 9 prompt "OMAP5 board select" 10 optional 11 12config TARGET_CL_SOM_AM57X 13 bool "CompuLab CL-SOM-AM57x" 14 select DRA7XX 15 16config TARGET_CM_T54 17 bool "CompuLab CM-T54" 18 19config TARGET_OMAP5_UEVM 20 bool "TI OMAP5 uEVM board" 21 22config TARGET_DRA7XX_EVM 23 bool "TI DRA7XX" 24 select BOARD_LATE_INIT 25 select DRA7XX 26 select TI_I2C_BOARD_DETECT 27 select PHYS_64BIT 28 imply SCSI 29 imply DM_PMIC 30 imply PMIC_LP87565 31 imply DM_REGULATOR 32 imply DM_REGULATOR_LP87565 33 34config TARGET_AM57XX_EVM 35 bool "AM57XX" 36 select BOARD_LATE_INIT 37 select DRA7XX 38 select TI_I2C_BOARD_DETECT 39 imply SCSI 40 41endchoice 42 43config SYS_SOC 44 default "omap5" 45 46config OMAP_PLATFORM_RESET_TIME_MAX_USEC 47 int "Something" 48 range 0 31219 49 default 31219 50 help 51 Most OMAPs' provide a way to specify the time for which the reset 52 should be held low while the voltages and Oscillator outputs 53 stabilize. 54 This time is mostly board and PMIC dependent. Hence the boards are 55 expected to specify a pre-computed time using the above option. 56 This value can be computed using a summation of the below 3 57 parameters 58 1: Time taken by the Osciallator to stop and restart 59 2: PMIC OTP time 60 3: Voltage ramp time, which can be derived using the PMIC slew rate 61 and value of voltage ramp needed. 62 63if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM 64menu "Voltage Domain OPP selections" 65 66choice 67 prompt "MPU Voltage Domain" 68 default DRA7_MPU_OPP_NOM 69 help 70 Select the Operating Performance Point(OPP) for the MPU voltage 71 domain on DRA7xx & AM57xx SoCs. 72 73config DRA7_MPU_OPP_NOM 74 bool "OPP NOM" 75 help 76 This config option enables Normal OPP for MPU. This is the safest 77 option for booting. 78 79endchoice 80 81choice 82 prompt "DSPEVE Voltage Domain" 83 help 84 Select the Operating Performance Point(OPP) for the DSPEVE voltage 85 domain on DRA7xx & AM57xx SoCs. 86 87config DRA7_DSPEVE_OPP_NOM 88 bool "OPP NOM" 89 help 90 This config option enables Normal OPP for DSPEVE. This is the safest 91 option for booting and choose this when unsure about other OPPs . 92 93config DRA7_DSPEVE_OPP_OD 94 bool "OPP OD" 95 help 96 This config option enables Over drive OPP for DSPEVE. 97 98config DRA7_DSPEVE_OPP_HIGH 99 bool "OPP HIGH" 100 help 101 This config option enables High OPP for DSPEVE. 102 103endchoice 104 105choice 106 prompt "IVA Voltage Domain" 107 help 108 Select the Operating Performance Point(OPP) for the IVA voltage 109 domain on DRA7xx & AM57xx SoCs. 110 111config DRA7_IVA_OPP_NOM 112 bool "OPP NOM" 113 help 114 This config option enables Normal OPP for IVA. This is the safest 115 option for booting and choose this when unsure about other OPPs . 116 117config DRA7_IVA_OPP_OD 118 bool "OPP OD" 119 help 120 This config option enables Over drive OPP for IVA. 121 122config DRA7_IVA_OPP_HIGH 123 bool "OPP HIGH" 124 help 125 This config option enables High OPP for IVA. 126 127endchoice 128 129choice 130 prompt "GPU Voltage Domain" 131 help 132 Select the Operating Performance Point(OPP) for the GPU voltage 133 domain on DRA7xx & AM57xx SoCs. 134 135config DRA7_GPU_OPP_NOM 136 bool "OPP NOM" 137 help 138 This config option enables Normal OPP for GPU. This is the safest 139 option for booting and choose this when unsure about other OPPs . 140 141config DRA7_GPU_OPP_OD 142 bool "OPP OD" 143 help 144 This config option enables Over drive OPP for GPU. 145 146config DRA7_GPU_OPP_HIGH 147 bool "OPP HIGH" 148 help 149 This config option enables High OPP for GPU. 150 151endchoice 152 153endmenu 154endif 155 156source "board/compulab/cl-som-am57x/Kconfig" 157source "board/compulab/cm_t54/Kconfig" 158source "board/ti/omap5_uevm/Kconfig" 159source "board/ti/dra7xx/Kconfig" 160source "board/ti/am57xx/Kconfig" 161 162endif 163