1if OMAP54XX 2 3config DRA7XX 4 bool 5 help 6 DRA7xx is an OMAP based SOC with Dual Core A-15s. 7 8choice 9 prompt "OMAP5 board select" 10 optional 11 12config TARGET_CL_SOM_AM57X 13 bool "CompuLab CL-SOM-AM57x" 14 select DRA7XX 15 16config TARGET_CM_T54 17 bool "CompuLab CM-T54" 18 19config TARGET_OMAP5_UEVM 20 bool "TI OMAP5 uEVM board" 21 22config TARGET_DRA7XX_EVM 23 bool "TI DRA7XX" 24 select BOARD_LATE_INIT 25 select DRA7XX 26 select TI_I2C_BOARD_DETECT 27 select PHYS_64BIT 28 29config TARGET_AM57XX_EVM 30 bool "AM57XX" 31 select BOARD_LATE_INIT 32 select DRA7XX 33 select TI_I2C_BOARD_DETECT 34 35endchoice 36 37config SYS_SOC 38 default "omap5" 39 40config TI_SECURE_EMIF_REGION_START 41 hex "Reserved EMIF region start address" 42 depends on TI_SECURE_DEVICE 43 default 0x0 44 help 45 Reserved EMIF region start address. Set to "0" to auto-select 46 to be at the end of the external memory region. 47 48config TI_SECURE_EMIF_TOTAL_REGION_SIZE 49 hex "Reserved EMIF region size" 50 depends on TI_SECURE_DEVICE 51 default 0x0 52 help 53 Total reserved EMIF region size. Default is 0, which means no reserved EMIF 54 region on secure devices. 55 56config TI_SECURE_EMIF_PROTECTED_REGION_SIZE 57 hex "Size of protected region within reserved EMIF region" 58 depends on TI_SECURE_DEVICE 59 default 0x0 60 help 61 This config option is used to specify the size of the portion of the total 62 reserved EMIF region set aside for secure OS needs that will be protected 63 using hardware memory firewalls. This value must be smaller than the 64 TI_SECURE_EMIF_TOTAL_REGION_SIZE value. 65 66config OMAP_PLATFORM_RESET_TIME_MAX_USEC 67 int "Something" 68 range 0 31219 69 default 31219 70 help 71 Most OMAPs' provide a way to specify the time for which the reset 72 should be held low while the voltages and Oscillator outputs 73 stabilize. 74 This time is mostly board and PMIC dependent. Hence the boards are 75 expected to specify a pre-computed time using the above option. 76 This value can be computed using a summation of the below 3 77 parameters 78 1: Time taken by the Osciallator to stop and restart 79 2: PMIC OTP time 80 3: Voltage ramp time, which can be derived using the PMIC slew rate 81 and value of voltage ramp needed. 82 83if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM 84menu "Voltage Domain OPP selections" 85 86choice 87 prompt "MPU Voltage Domain" 88 default DRA7_MPU_OPP_NOM 89 help 90 Select the Operating Performance Point(OPP) for the MPU voltage 91 domain on DRA7xx & AM57xx SoCs. 92 93config DRA7_MPU_OPP_NOM 94 bool "OPP NOM" 95 help 96 This config option enables Normal OPP for MPU. This is the safest 97 option for booting. 98 99endchoice 100 101choice 102 prompt "DSPEVE Voltage Domain" 103 help 104 Select the Operating Performance Point(OPP) for the DSPEVE voltage 105 domain on DRA7xx & AM57xx SoCs. 106 107config DRA7_DSPEVE_OPP_NOM 108 bool "OPP NOM" 109 help 110 This config option enables Normal OPP for DSPEVE. This is the safest 111 option for booting and choose this when unsure about other OPPs . 112 113config DRA7_DSPEVE_OPP_OD 114 bool "OPP OD" 115 help 116 This config option enables Over drive OPP for DSPEVE. 117 118config DRA7_DSPEVE_OPP_HIGH 119 bool "OPP HIGH" 120 help 121 This config option enables High OPP for DSPEVE. 122 123endchoice 124 125choice 126 prompt "IVA Voltage Domain" 127 help 128 Select the Operating Performance Point(OPP) for the IVA voltage 129 domain on DRA7xx & AM57xx SoCs. 130 131config DRA7_IVA_OPP_NOM 132 bool "OPP NOM" 133 help 134 This config option enables Normal OPP for IVA. This is the safest 135 option for booting and choose this when unsure about other OPPs . 136 137config DRA7_IVA_OPP_OD 138 bool "OPP OD" 139 help 140 This config option enables Over drive OPP for IVA. 141 142config DRA7_IVA_OPP_HIGH 143 bool "OPP HIGH" 144 help 145 This config option enables High OPP for IVA. 146 147endchoice 148 149choice 150 prompt "GPU Voltage Domain" 151 help 152 Select the Operating Performance Point(OPP) for the GPU voltage 153 domain on DRA7xx & AM57xx SoCs. 154 155config DRA7_GPU_OPP_NOM 156 bool "OPP NOM" 157 help 158 This config option enables Normal OPP for GPU. This is the safest 159 option for booting and choose this when unsure about other OPPs . 160 161config DRA7_GPU_OPP_OD 162 bool "OPP OD" 163 help 164 This config option enables Over drive OPP for GPU. 165 166config DRA7_GPU_OPP_HIGH 167 bool "OPP HIGH" 168 help 169 This config option enables High OPP for GPU. 170 171endchoice 172 173endmenu 174endif 175 176source "board/compulab/cl-som-am57x/Kconfig" 177source "board/compulab/cm_t54/Kconfig" 178source "board/ti/omap5_uevm/Kconfig" 179source "board/ti/dra7xx/Kconfig" 180source "board/ti/am57xx/Kconfig" 181 182endif 183