1 /* 2 * (C) Copyright 2008 3 * Texas Instruments, <www.ti.com> 4 * 5 * Author : 6 * Manikandan Pillai <mani.pillai@ti.com> 7 * 8 * Derived from Beagle Board and 3430 SDP code by 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * Syed Mohammed Khasim <khasim@ti.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #include <common.h> 16 #include <asm/io.h> 17 #include <asm/arch/mem.h> /* get mem tables */ 18 #include <asm/arch/sys_proto.h> 19 #include <asm/bootm.h> 20 21 #include <i2c.h> 22 #include <linux/compiler.h> 23 24 extern omap3_sysinfo sysinfo; 25 static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; 26 27 #ifdef CONFIG_DISPLAY_CPUINFO 28 static char *rev_s[CPU_3XX_MAX_REV] = { 29 "1.0", 30 "2.0", 31 "2.1", 32 "3.0", 33 "3.1", 34 "UNKNOWN", 35 "UNKNOWN", 36 "3.1.2"}; 37 38 /* this is the revision table for 37xx CPUs */ 39 static char *rev_s_37xx[CPU_37XX_MAX_REV] = { 40 "1.0", 41 "1.1", 42 "1.2"}; 43 #endif /* CONFIG_DISPLAY_CPUINFO */ 44 45 void omap_die_id(unsigned int *die_id) 46 { 47 struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; 48 49 die_id[0] = readl(&id_base->die_id_0); 50 die_id[1] = readl(&id_base->die_id_1); 51 die_id[2] = readl(&id_base->die_id_2); 52 die_id[3] = readl(&id_base->die_id_3); 53 } 54 55 /****************************************** 56 * get_cpu_type(void) - extract cpu info 57 ******************************************/ 58 u32 get_cpu_type(void) 59 { 60 return readl(&ctrl_base->ctrl_omap_stat); 61 } 62 63 /****************************************** 64 * get_cpu_id(void) - extract cpu id 65 * returns 0 for ES1.0, cpuid otherwise 66 ******************************************/ 67 u32 get_cpu_id(void) 68 { 69 struct ctrl_id *id_base; 70 u32 cpuid = 0; 71 72 /* 73 * On ES1.0 the IDCODE register is not exposed on L4 74 * so using CPU ID to differentiate between ES1.0 and > ES1.0. 75 */ 76 __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); 77 if ((cpuid & 0xf) == 0x0) { 78 return 0; 79 } else { 80 /* Decode the IDs on > ES1.0 */ 81 id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE; 82 83 cpuid = readl(&id_base->idcode); 84 } 85 86 return cpuid; 87 } 88 89 /****************************************** 90 * get_cpu_family(void) - extract cpu info 91 ******************************************/ 92 u32 get_cpu_family(void) 93 { 94 u16 hawkeye; 95 u32 cpu_family; 96 u32 cpuid = get_cpu_id(); 97 98 if (cpuid == 0) 99 return CPU_OMAP34XX; 100 101 hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff; 102 switch (hawkeye) { 103 case HAWKEYE_OMAP34XX: 104 cpu_family = CPU_OMAP34XX; 105 break; 106 case HAWKEYE_AM35XX: 107 cpu_family = CPU_AM35XX; 108 break; 109 case HAWKEYE_OMAP36XX: 110 cpu_family = CPU_OMAP36XX; 111 break; 112 default: 113 cpu_family = CPU_OMAP34XX; 114 } 115 116 return cpu_family; 117 } 118 119 /****************************************** 120 * get_cpu_rev(void) - extract version info 121 ******************************************/ 122 u32 get_cpu_rev(void) 123 { 124 u32 cpuid = get_cpu_id(); 125 126 if (cpuid == 0) 127 return CPU_3XX_ES10; 128 else 129 return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf; 130 } 131 132 /***************************************************************** 133 * get_sku_id(void) - read sku_id to get info on max clock rate 134 *****************************************************************/ 135 u32 get_sku_id(void) 136 { 137 struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; 138 return readl(&id_base->sku_id) & SKUID_CLK_MASK; 139 } 140 141 /*************************************************************************** 142 * get_gpmc0_base() - Return current address hardware will be 143 * fetching from. The below effectively gives what is correct, its a bit 144 * mis-leading compared to the TRM. For the most general case the mask 145 * needs to be also taken into account this does work in practice. 146 * - for u-boot we currently map: 147 * -- 0 to nothing, 148 * -- 4 to flash 149 * -- 8 to enent 150 * -- c to wifi 151 ****************************************************************************/ 152 u32 get_gpmc0_base(void) 153 { 154 u32 b; 155 156 b = readl(&gpmc_cfg->cs[0].config7); 157 b &= 0x1F; /* keep base [5:0] */ 158 b = b << 24; /* ret 0x0b000000 */ 159 return b; 160 } 161 162 /******************************************************************* 163 * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) 164 *******************************************************************/ 165 u32 get_gpmc0_width(void) 166 { 167 return WIDTH_16BIT; 168 } 169 170 /************************************************************************* 171 * get_board_rev() - setup to pass kernel board revision information 172 * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) 173 *************************************************************************/ 174 #ifdef CONFIG_REVISION_TAG 175 u32 __weak get_board_rev(void) 176 { 177 return 0x20; 178 } 179 #endif 180 181 /******************************************************** 182 * get_base(); get upper addr of current execution 183 *******************************************************/ 184 static u32 get_base(void) 185 { 186 u32 val; 187 188 __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); 189 val &= 0xF0000000; 190 val >>= 28; 191 return val; 192 } 193 194 /******************************************************** 195 * is_running_in_flash() - tell if currently running in 196 * FLASH. 197 *******************************************************/ 198 u32 is_running_in_flash(void) 199 { 200 if (get_base() < 4) 201 return 1; /* in FLASH */ 202 203 return 0; /* running in SRAM or SDRAM */ 204 } 205 206 /******************************************************** 207 * is_running_in_sram() - tell if currently running in 208 * SRAM. 209 *******************************************************/ 210 u32 is_running_in_sram(void) 211 { 212 if (get_base() == 4) 213 return 1; /* in SRAM */ 214 215 return 0; /* running in FLASH or SDRAM */ 216 } 217 218 /******************************************************** 219 * is_running_in_sdram() - tell if currently running in 220 * SDRAM. 221 *******************************************************/ 222 u32 is_running_in_sdram(void) 223 { 224 if (get_base() > 4) 225 return 1; /* in SDRAM */ 226 227 return 0; /* running in SRAM or FLASH */ 228 } 229 230 /*************************************************************** 231 * get_boot_type() - Is this an XIP type device or a stream one 232 * bits 4-0 specify type. Bit 5 says mem/perif 233 ***************************************************************/ 234 u32 get_boot_type(void) 235 { 236 return (readl(&ctrl_base->status) & SYSBOOT_MASK); 237 } 238 239 /************************************************************* 240 * get_device_type(): tell if GP/HS/EMU/TST 241 *************************************************************/ 242 u32 get_device_type(void) 243 { 244 return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8); 245 } 246 247 #ifdef CONFIG_DISPLAY_CPUINFO 248 /** 249 * Print CPU information 250 */ 251 int print_cpuinfo (void) 252 { 253 char *cpu_family_s, *cpu_s, *sec_s, *max_clk; 254 255 switch (get_cpu_family()) { 256 case CPU_OMAP34XX: 257 cpu_family_s = "OMAP"; 258 switch (get_cpu_type()) { 259 case OMAP3503: 260 cpu_s = "3503"; 261 break; 262 case OMAP3515: 263 cpu_s = "3515"; 264 break; 265 case OMAP3525: 266 cpu_s = "3525"; 267 break; 268 case OMAP3530: 269 cpu_s = "3530"; 270 break; 271 default: 272 cpu_s = "35XX"; 273 break; 274 } 275 if ((get_cpu_rev() >= CPU_3XX_ES31) && 276 (get_sku_id() == SKUID_CLK_720MHZ)) 277 max_clk = "720 MHz"; 278 else 279 max_clk = "600 MHz"; 280 281 break; 282 case CPU_AM35XX: 283 cpu_family_s = "AM"; 284 switch (get_cpu_type()) { 285 case AM3505: 286 cpu_s = "3505"; 287 break; 288 case AM3517: 289 cpu_s = "3517"; 290 break; 291 default: 292 cpu_s = "35XX"; 293 break; 294 } 295 max_clk = "600 Mhz"; 296 break; 297 case CPU_OMAP36XX: 298 cpu_family_s = "OMAP"; 299 switch (get_cpu_type()) { 300 case OMAP3730: 301 cpu_s = "3630/3730"; 302 break; 303 default: 304 cpu_s = "36XX/37XX"; 305 break; 306 } 307 max_clk = "1 Ghz"; 308 break; 309 default: 310 cpu_family_s = "OMAP"; 311 cpu_s = "35XX"; 312 max_clk = "600 Mhz"; 313 } 314 315 switch (get_device_type()) { 316 case TST_DEVICE: 317 sec_s = "TST"; 318 break; 319 case EMU_DEVICE: 320 sec_s = "EMU"; 321 break; 322 case HS_DEVICE: 323 sec_s = "HS"; 324 break; 325 case GP_DEVICE: 326 sec_s = "GP"; 327 break; 328 default: 329 sec_s = "?"; 330 } 331 332 if (CPU_OMAP36XX == get_cpu_family()) 333 printf("%s%s-%s ES%s, CPU-OPP2, L3-200MHz, Max CPU Clock %s\n", 334 cpu_family_s, cpu_s, sec_s, 335 rev_s_37xx[get_cpu_rev()], max_clk); 336 else 337 printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n", 338 cpu_family_s, cpu_s, sec_s, 339 rev_s[get_cpu_rev()], max_clk); 340 341 return 0; 342 } 343 #endif /* CONFIG_DISPLAY_CPUINFO */ 344