1 /*
2  * This file configures the internal USB PHY in AM35X.
3  *
4  * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
5  *
6  * Based on omap_phy_internal.c code from Linux by
7  * Hema HK <hemahk@ti.com>
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #include <common.h>
13 #include <asm/io.h>
14 #include <asm/arch/am35x_def.h>
15 
16 void am35x_musb_reset(void)
17 {
18 	/* Reset the musb interface */
19 	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
20 			0, USBOTGSS_SW_RST);
21 	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
22 			USBOTGSS_SW_RST, 0);
23 }
24 
25 void am35x_musb_phy_power(u8 on)
26 {
27 	unsigned long start = get_timer(0);
28 
29 	if (on) {
30 		/*
31 		 * Start the on-chip PHY and its PLL.
32 		 */
33 		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
34 				CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
35 				CONF2_PHY_PLLON);
36 
37 		debug("Waiting for PHY clock good...\n");
38 		while (!(readl(&am35x_scm_general_regs->devconf2)
39 				& CONF2_PHYCLKGD)) {
40 
41 			if (get_timer(start) > CONFIG_SYS_HZ / 10) {
42 				printf("musb PHY clock good timed out\n");
43 				break;
44 			}
45 		}
46 	} else {
47 		/*
48 		 * Power down the on-chip PHY.
49 		 */
50 		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
51 				CONF2_PHY_PLLON,
52 				CONF2_PHYPWRDN | CONF2_OTGPWRDN);
53 	}
54 }
55 
56 void am35x_musb_clear_irq(void)
57 {
58 	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
59 			0, USBOTGSS_INT_CLR);
60 	readl(&am35x_scm_general_regs->lvl_intr_clr);
61 }
62