1 /* 2 * boot-common.c 3 * 4 * Common bootmode functions for omap based boards 5 * 6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <ahci.h> 13 #include <spl.h> 14 #include <asm/omap_common.h> 15 #include <asm/arch/omap.h> 16 #include <asm/arch/mmc_host_def.h> 17 #include <asm/arch/sys_proto.h> 18 #include <watchdog.h> 19 #include <scsi.h> 20 #include <i2c.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 __weak u32 omap_sys_boot_device(void) 25 { 26 return BOOT_DEVICE_NONE; 27 } 28 29 void save_omap_boot_params(void) 30 { 31 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); 32 struct omap_boot_parameters *omap_boot_params; 33 int sys_boot_device = 0; 34 u32 boot_device; 35 u32 boot_mode; 36 37 if ((boot_params < NON_SECURE_SRAM_START) || 38 (boot_params > NON_SECURE_SRAM_END)) 39 return; 40 41 omap_boot_params = (struct omap_boot_parameters *)boot_params; 42 43 boot_device = omap_boot_params->boot_device; 44 boot_mode = MMCSD_MODE_UNDEFINED; 45 46 /* Boot device */ 47 48 #ifdef BOOT_DEVICE_NAND_I2C 49 /* 50 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. 51 * Otherwise the SPL boot IF can't handle this device correctly. 52 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens 53 * Draco leads to this boot-device passed to SPL from the BootROM. 54 */ 55 if (boot_device == BOOT_DEVICE_NAND_I2C) 56 boot_device = BOOT_DEVICE_NAND; 57 #endif 58 #ifdef BOOT_DEVICE_QSPI_4 59 /* 60 * We get different values for QSPI_1 and QSPI_4 being used, but 61 * don't actually care about this difference. Rather than 62 * mangle the later code, if we're coming in as QSPI_4 just 63 * change to the QSPI_1 value. 64 */ 65 if (boot_device == BOOT_DEVICE_QSPI_4) 66 boot_device = BOOT_DEVICE_SPI; 67 #endif 68 /* 69 * When booting from peripheral booting, the boot device is not usable 70 * as-is (unless there is support for it), so the boot device is instead 71 * figured out using the SYS_BOOT pins. 72 */ 73 switch (boot_device) { 74 #if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT) 75 case BOOT_DEVICE_UART: 76 sys_boot_device = 1; 77 break; 78 #endif 79 #if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT) 80 case BOOT_DEVICE_USB: 81 sys_boot_device = 1; 82 break; 83 #endif 84 #if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT) 85 case BOOT_DEVICE_USBETH: 86 sys_boot_device = 1; 87 break; 88 #endif 89 #if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT) 90 case BOOT_DEVICE_CPGMAC: 91 sys_boot_device = 1; 92 break; 93 #endif 94 #if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT) 95 case BOOT_DEVICE_DFU: 96 sys_boot_device = 1; 97 break; 98 #endif 99 } 100 101 if (sys_boot_device) { 102 boot_device = omap_sys_boot_device(); 103 104 /* MMC raw mode will fallback to FS mode. */ 105 if ((boot_device >= MMC_BOOT_DEVICES_START) && 106 (boot_device <= MMC_BOOT_DEVICES_END)) 107 boot_mode = MMCSD_MODE_RAW; 108 } 109 110 gd->arch.omap_boot_device = boot_device; 111 112 /* Boot mode */ 113 114 #ifdef CONFIG_OMAP34XX 115 if ((boot_device >= MMC_BOOT_DEVICES_START) && 116 (boot_device <= MMC_BOOT_DEVICES_END)) { 117 switch (boot_device) { 118 case BOOT_DEVICE_MMC1: 119 boot_mode = MMCSD_MODE_FS; 120 break; 121 case BOOT_DEVICE_MMC2: 122 boot_mode = MMCSD_MODE_RAW; 123 break; 124 } 125 } 126 #else 127 /* 128 * If the boot device was dynamically changed and doesn't match what 129 * the bootrom initially booted, we cannot use the boot device 130 * descriptor to figure out the boot mode. 131 */ 132 if ((boot_device == omap_boot_params->boot_device) && 133 (boot_device >= MMC_BOOT_DEVICES_START) && 134 (boot_device <= MMC_BOOT_DEVICES_END)) { 135 boot_params = omap_boot_params->boot_device_descriptor; 136 if ((boot_params < NON_SECURE_SRAM_START) || 137 (boot_params > NON_SECURE_SRAM_END)) 138 return; 139 140 boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); 141 if ((boot_params < NON_SECURE_SRAM_START) || 142 (boot_params > NON_SECURE_SRAM_END)) 143 return; 144 145 boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); 146 147 if (boot_mode != MMCSD_MODE_FS && 148 boot_mode != MMCSD_MODE_RAW) 149 #ifdef CONFIG_SUPPORT_EMMC_BOOT 150 boot_mode = MMCSD_MODE_EMMCBOOT; 151 #else 152 boot_mode = MMCSD_MODE_UNDEFINED; 153 #endif 154 } 155 #endif 156 157 gd->arch.omap_boot_mode = boot_mode; 158 159 #if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ 160 !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) 161 162 /* CH flags */ 163 164 gd->arch.omap_ch_flags = omap_boot_params->ch_flags; 165 #endif 166 } 167 168 #ifdef CONFIG_SPL_BUILD 169 u32 spl_boot_device(void) 170 { 171 return gd->arch.omap_boot_device; 172 } 173 174 u32 spl_boot_mode(const u32 boot_device) 175 { 176 return gd->arch.omap_boot_mode; 177 } 178 179 void spl_board_init(void) 180 { 181 /* 182 * Save the boot parameters passed from romcode. 183 * We cannot delay the saving further than this, 184 * to prevent overwrites. 185 */ 186 save_omap_boot_params(); 187 188 /* Prepare console output */ 189 preloader_console_init(); 190 191 #if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) 192 gpmc_init(); 193 #endif 194 #ifdef CONFIG_SPL_I2C_SUPPORT 195 i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); 196 #endif 197 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) 198 arch_misc_init(); 199 #endif 200 #if defined(CONFIG_HW_WATCHDOG) 201 hw_watchdog_init(); 202 #endif 203 #ifdef CONFIG_AM33XX 204 am33xx_spl_board_init(); 205 #endif 206 } 207 208 __weak int board_mmc_init(bd_t *bis) 209 { 210 switch (spl_boot_device()) { 211 case BOOT_DEVICE_MMC1: 212 omap_mmc_init(0, 0, 0, -1, -1); 213 break; 214 case BOOT_DEVICE_MMC2: 215 case BOOT_DEVICE_MMC2_2: 216 omap_mmc_init(0, 0, 0, -1, -1); 217 omap_mmc_init(1, 0, 0, -1, -1); 218 break; 219 } 220 return 0; 221 } 222 223 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) 224 { 225 typedef void __noreturn (*image_entry_noargs_t)(u32 *); 226 image_entry_noargs_t image_entry = 227 (image_entry_noargs_t) spl_image->entry_point; 228 229 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); 230 231 debug("image entry point: 0x%lX\n", spl_image->entry_point); 232 /* Pass the saved boot_params from rom code */ 233 image_entry((u32 *)boot_params); 234 } 235 #endif 236 237 #ifdef CONFIG_SCSI_AHCI_PLAT 238 void arch_preboot_os(void) 239 { 240 ahci_reset((void __iomem *)DWC_AHSATA_BASE); 241 } 242 #endif 243 244 #if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) 245 int fb_set_reboot_flag(void) 246 { 247 printf("Setting reboot to fastboot flag ...\n"); 248 setenv("dofastboot", "1"); 249 saveenv(); 250 return 0; 251 } 252 #endif 253