1 /* 2 * boot-common.c 3 * 4 * Common bootmode functions for omap based boards 5 * 6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <ahci.h> 13 #include <spl.h> 14 #include <asm/omap_common.h> 15 #include <asm/arch/omap.h> 16 #include <asm/arch/mmc_host_def.h> 17 #include <asm/arch/sys_proto.h> 18 #include <watchdog.h> 19 #include <scsi.h> 20 #include <i2c.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 __weak u32 omap_sys_boot_device(void) 25 { 26 return BOOT_DEVICE_NONE; 27 } 28 29 void save_omap_boot_params(void) 30 { 31 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); 32 struct omap_boot_parameters *omap_boot_params; 33 int sys_boot_device = 0; 34 u32 boot_device; 35 u32 boot_mode; 36 37 if ((boot_params < NON_SECURE_SRAM_START) || 38 (boot_params > NON_SECURE_SRAM_END)) 39 return; 40 41 omap_boot_params = (struct omap_boot_parameters *)boot_params; 42 43 boot_device = omap_boot_params->boot_device; 44 boot_mode = MMCSD_MODE_UNDEFINED; 45 46 /* Boot device */ 47 48 #ifdef BOOT_DEVICE_NAND_I2C 49 /* 50 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. 51 * Otherwise the SPL boot IF can't handle this device correctly. 52 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens 53 * Draco leads to this boot-device passed to SPL from the BootROM. 54 */ 55 if (boot_device == BOOT_DEVICE_NAND_I2C) 56 boot_device = BOOT_DEVICE_NAND; 57 #endif 58 #ifdef BOOT_DEVICE_QSPI_4 59 /* 60 * We get different values for QSPI_1 and QSPI_4 being used, but 61 * don't actually care about this difference. Rather than 62 * mangle the later code, if we're coming in as QSPI_4 just 63 * change to the QSPI_1 value. 64 */ 65 if (boot_device == BOOT_DEVICE_QSPI_4) 66 boot_device = BOOT_DEVICE_SPI; 67 #endif 68 #ifdef CONFIG_TI816X 69 /* 70 * On PG2.0 and later TI816x the values we get when booting are not the 71 * same as on PG1.0, which is what the defines are based on. Update 72 * them as needed. 73 */ 74 if (get_cpu_rev() != 1) { 75 if (boot_device == 0x05) { 76 omap_boot_params->boot_device = BOOT_DEVICE_NAND; 77 boot_device = BOOT_DEVICE_NAND; 78 } 79 if (boot_device == 0x08) { 80 omap_boot_params->boot_device = BOOT_DEVICE_MMC1; 81 boot_device = BOOT_DEVICE_MMC1; 82 } 83 } 84 #endif 85 /* 86 * When booting from peripheral booting, the boot device is not usable 87 * as-is (unless there is support for it), so the boot device is instead 88 * figured out using the SYS_BOOT pins. 89 */ 90 switch (boot_device) { 91 #if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT) 92 case BOOT_DEVICE_UART: 93 sys_boot_device = 1; 94 break; 95 #endif 96 #if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT) 97 case BOOT_DEVICE_USB: 98 sys_boot_device = 1; 99 break; 100 #endif 101 #if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT) 102 case BOOT_DEVICE_USBETH: 103 sys_boot_device = 1; 104 break; 105 #endif 106 #if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT) 107 case BOOT_DEVICE_CPGMAC: 108 sys_boot_device = 1; 109 break; 110 #endif 111 #if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT) 112 case BOOT_DEVICE_DFU: 113 sys_boot_device = 1; 114 break; 115 #endif 116 } 117 118 if (sys_boot_device) { 119 boot_device = omap_sys_boot_device(); 120 121 /* MMC raw mode will fallback to FS mode. */ 122 if ((boot_device >= MMC_BOOT_DEVICES_START) && 123 (boot_device <= MMC_BOOT_DEVICES_END)) 124 boot_mode = MMCSD_MODE_RAW; 125 } 126 127 gd->arch.omap_boot_device = boot_device; 128 129 /* Boot mode */ 130 131 #ifdef CONFIG_OMAP34XX 132 if ((boot_device >= MMC_BOOT_DEVICES_START) && 133 (boot_device <= MMC_BOOT_DEVICES_END)) { 134 switch (boot_device) { 135 case BOOT_DEVICE_MMC1: 136 boot_mode = MMCSD_MODE_FS; 137 break; 138 case BOOT_DEVICE_MMC2: 139 boot_mode = MMCSD_MODE_RAW; 140 break; 141 } 142 } 143 #else 144 /* 145 * If the boot device was dynamically changed and doesn't match what 146 * the bootrom initially booted, we cannot use the boot device 147 * descriptor to figure out the boot mode. 148 */ 149 if ((boot_device == omap_boot_params->boot_device) && 150 (boot_device >= MMC_BOOT_DEVICES_START) && 151 (boot_device <= MMC_BOOT_DEVICES_END)) { 152 boot_params = omap_boot_params->boot_device_descriptor; 153 if ((boot_params < NON_SECURE_SRAM_START) || 154 (boot_params > NON_SECURE_SRAM_END)) 155 return; 156 157 boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); 158 if ((boot_params < NON_SECURE_SRAM_START) || 159 (boot_params > NON_SECURE_SRAM_END)) 160 return; 161 162 boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); 163 164 if (boot_mode != MMCSD_MODE_FS && 165 boot_mode != MMCSD_MODE_RAW) 166 #ifdef CONFIG_SUPPORT_EMMC_BOOT 167 boot_mode = MMCSD_MODE_EMMCBOOT; 168 #else 169 boot_mode = MMCSD_MODE_UNDEFINED; 170 #endif 171 } 172 #endif 173 174 gd->arch.omap_boot_mode = boot_mode; 175 176 #if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ 177 !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) 178 179 /* CH flags */ 180 181 gd->arch.omap_ch_flags = omap_boot_params->ch_flags; 182 #endif 183 } 184 185 #ifdef CONFIG_SPL_BUILD 186 u32 spl_boot_device(void) 187 { 188 return gd->arch.omap_boot_device; 189 } 190 191 u32 spl_boot_mode(const u32 boot_device) 192 { 193 return gd->arch.omap_boot_mode; 194 } 195 196 void spl_board_init(void) 197 { 198 /* Prepare console output */ 199 preloader_console_init(); 200 201 #if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) 202 gpmc_init(); 203 #endif 204 #ifdef CONFIG_SPL_I2C_SUPPORT 205 i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); 206 #endif 207 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) 208 arch_misc_init(); 209 #endif 210 #if defined(CONFIG_HW_WATCHDOG) 211 hw_watchdog_init(); 212 #endif 213 #ifdef CONFIG_AM33XX 214 am33xx_spl_board_init(); 215 #endif 216 } 217 218 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) 219 { 220 typedef void __noreturn (*image_entry_noargs_t)(u32 *); 221 image_entry_noargs_t image_entry = 222 (image_entry_noargs_t) spl_image->entry_point; 223 224 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); 225 226 debug("image entry point: 0x%lX\n", spl_image->entry_point); 227 /* Pass the saved boot_params from rom code */ 228 image_entry((u32 *)boot_params); 229 } 230 #endif 231 232 #ifdef CONFIG_SCSI_AHCI_PLAT 233 void arch_preboot_os(void) 234 { 235 ahci_reset((void __iomem *)DWC_AHSATA_BASE); 236 } 237 #endif 238 239 #if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) 240 int fb_set_reboot_flag(void) 241 { 242 printf("Setting reboot to fastboot flag ...\n"); 243 setenv("dofastboot", "1"); 244 saveenv(); 245 return 0; 246 } 247 #endif 248