1 /* 2 * boot-common.c 3 * 4 * Common bootmode functions for omap based boards 5 * 6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <ahci.h> 13 #include <environment.h> 14 #include <spl.h> 15 #include <asm/omap_common.h> 16 #include <asm/arch/omap.h> 17 #include <asm/arch/mmc_host_def.h> 18 #include <asm/arch/sys_proto.h> 19 #include <watchdog.h> 20 #include <scsi.h> 21 #include <i2c.h> 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 __weak u32 omap_sys_boot_device(void) 26 { 27 return BOOT_DEVICE_NONE; 28 } 29 30 void save_omap_boot_params(void) 31 { 32 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); 33 struct omap_boot_parameters *omap_boot_params; 34 int sys_boot_device = 0; 35 u32 boot_device; 36 u32 boot_mode; 37 38 if ((boot_params < NON_SECURE_SRAM_START) || 39 (boot_params > NON_SECURE_SRAM_END)) 40 return; 41 42 omap_boot_params = (struct omap_boot_parameters *)boot_params; 43 44 boot_device = omap_boot_params->boot_device; 45 boot_mode = MMCSD_MODE_UNDEFINED; 46 47 /* Boot device */ 48 49 #ifdef BOOT_DEVICE_NAND_I2C 50 /* 51 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. 52 * Otherwise the SPL boot IF can't handle this device correctly. 53 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens 54 * Draco leads to this boot-device passed to SPL from the BootROM. 55 */ 56 if (boot_device == BOOT_DEVICE_NAND_I2C) 57 boot_device = BOOT_DEVICE_NAND; 58 #endif 59 #ifdef BOOT_DEVICE_QSPI_4 60 /* 61 * We get different values for QSPI_1 and QSPI_4 being used, but 62 * don't actually care about this difference. Rather than 63 * mangle the later code, if we're coming in as QSPI_4 just 64 * change to the QSPI_1 value. 65 */ 66 if (boot_device == BOOT_DEVICE_QSPI_4) 67 boot_device = BOOT_DEVICE_SPI; 68 #endif 69 #ifdef CONFIG_TI816X 70 /* 71 * On PG2.0 and later TI816x the values we get when booting are not the 72 * same as on PG1.0, which is what the defines are based on. Update 73 * them as needed. 74 */ 75 if (get_cpu_rev() != 1) { 76 if (boot_device == 0x05) { 77 omap_boot_params->boot_device = BOOT_DEVICE_NAND; 78 boot_device = BOOT_DEVICE_NAND; 79 } 80 if (boot_device == 0x08) { 81 omap_boot_params->boot_device = BOOT_DEVICE_MMC1; 82 boot_device = BOOT_DEVICE_MMC1; 83 } 84 } 85 #endif 86 /* 87 * When booting from peripheral booting, the boot device is not usable 88 * as-is (unless there is support for it), so the boot device is instead 89 * figured out using the SYS_BOOT pins. 90 */ 91 switch (boot_device) { 92 #if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT) 93 case BOOT_DEVICE_UART: 94 sys_boot_device = 1; 95 break; 96 #endif 97 #if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT) 98 case BOOT_DEVICE_USB: 99 sys_boot_device = 1; 100 break; 101 #endif 102 #if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USB_ETHER) 103 case BOOT_DEVICE_USBETH: 104 sys_boot_device = 1; 105 break; 106 #endif 107 #if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT) 108 case BOOT_DEVICE_CPGMAC: 109 sys_boot_device = 1; 110 break; 111 #endif 112 #if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT) 113 case BOOT_DEVICE_DFU: 114 sys_boot_device = 1; 115 break; 116 #endif 117 } 118 119 if (sys_boot_device) { 120 boot_device = omap_sys_boot_device(); 121 122 /* MMC raw mode will fallback to FS mode. */ 123 if ((boot_device >= MMC_BOOT_DEVICES_START) && 124 (boot_device <= MMC_BOOT_DEVICES_END)) 125 boot_mode = MMCSD_MODE_RAW; 126 } 127 128 gd->arch.omap_boot_device = boot_device; 129 130 /* Boot mode */ 131 132 #ifdef CONFIG_OMAP34XX 133 if ((boot_device >= MMC_BOOT_DEVICES_START) && 134 (boot_device <= MMC_BOOT_DEVICES_END)) { 135 switch (boot_device) { 136 case BOOT_DEVICE_MMC1: 137 boot_mode = MMCSD_MODE_FS; 138 break; 139 case BOOT_DEVICE_MMC2: 140 boot_mode = MMCSD_MODE_RAW; 141 break; 142 } 143 } 144 #else 145 /* 146 * If the boot device was dynamically changed and doesn't match what 147 * the bootrom initially booted, we cannot use the boot device 148 * descriptor to figure out the boot mode. 149 */ 150 if ((boot_device == omap_boot_params->boot_device) && 151 (boot_device >= MMC_BOOT_DEVICES_START) && 152 (boot_device <= MMC_BOOT_DEVICES_END)) { 153 boot_params = omap_boot_params->boot_device_descriptor; 154 if ((boot_params < NON_SECURE_SRAM_START) || 155 (boot_params > NON_SECURE_SRAM_END)) 156 return; 157 158 boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); 159 if ((boot_params < NON_SECURE_SRAM_START) || 160 (boot_params > NON_SECURE_SRAM_END)) 161 return; 162 163 boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); 164 165 if (boot_mode != MMCSD_MODE_FS && 166 boot_mode != MMCSD_MODE_RAW) 167 #ifdef CONFIG_SUPPORT_EMMC_BOOT 168 boot_mode = MMCSD_MODE_EMMCBOOT; 169 #else 170 boot_mode = MMCSD_MODE_UNDEFINED; 171 #endif 172 } 173 #endif 174 175 gd->arch.omap_boot_mode = boot_mode; 176 177 #if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ 178 !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) 179 180 /* CH flags */ 181 182 gd->arch.omap_ch_flags = omap_boot_params->ch_flags; 183 #endif 184 } 185 186 #ifdef CONFIG_SPL_BUILD 187 u32 spl_boot_device(void) 188 { 189 return gd->arch.omap_boot_device; 190 } 191 192 u32 spl_boot_mode(const u32 boot_device) 193 { 194 return gd->arch.omap_boot_mode; 195 } 196 197 void spl_board_init(void) 198 { 199 /* Prepare console output */ 200 preloader_console_init(); 201 202 #if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) 203 gpmc_init(); 204 #endif 205 #ifdef CONFIG_SPL_I2C_SUPPORT 206 i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); 207 #endif 208 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) 209 arch_misc_init(); 210 #endif 211 #if defined(CONFIG_HW_WATCHDOG) 212 hw_watchdog_init(); 213 #endif 214 #ifdef CONFIG_AM33XX 215 am33xx_spl_board_init(); 216 #endif 217 } 218 219 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) 220 { 221 typedef void __noreturn (*image_entry_noargs_t)(u32 *); 222 image_entry_noargs_t image_entry = 223 (image_entry_noargs_t) spl_image->entry_point; 224 225 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); 226 227 debug("image entry point: 0x%lX\n", spl_image->entry_point); 228 /* Pass the saved boot_params from rom code */ 229 image_entry((u32 *)boot_params); 230 } 231 #endif 232 233 #ifdef CONFIG_SCSI_AHCI_PLAT 234 void arch_preboot_os(void) 235 { 236 ahci_reset((void __iomem *)DWC_AHSATA_BASE); 237 } 238 #endif 239 240 #if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) 241 int fb_set_reboot_flag(void) 242 { 243 printf("Setting reboot to fastboot flag ...\n"); 244 env_set("dofastboot", "1"); 245 env_save(); 246 return 0; 247 } 248 #endif 249