1 /*
2  * board.c
3  *
4  * Common board functions for AM33XX based boards
5  *
6  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <dm.h>
13 #include <debug_uart.h>
14 #include <errno.h>
15 #include <ns16550.h>
16 #include <spl.h>
17 #include <asm/arch/cpu.h>
18 #include <asm/arch/hardware.h>
19 #include <asm/arch/omap.h>
20 #include <asm/arch/ddr_defs.h>
21 #include <asm/arch/clock.h>
22 #include <asm/arch/gpio.h>
23 #include <asm/arch/mem.h>
24 #include <asm/arch/mmc_host_def.h>
25 #include <asm/arch/sys_proto.h>
26 #include <asm/io.h>
27 #include <asm/emif.h>
28 #include <asm/gpio.h>
29 #include <asm/omap_common.h>
30 #include <i2c.h>
31 #include <miiphy.h>
32 #include <cpsw.h>
33 #include <linux/errno.h>
34 #include <linux/compiler.h>
35 #include <linux/usb/ch9.h>
36 #include <linux/usb/gadget.h>
37 #include <linux/usb/musb.h>
38 #include <asm/omap_musb.h>
39 #include <asm/davinci_rtc.h>
40 
41 DECLARE_GLOBAL_DATA_PTR;
42 
43 int dram_init(void)
44 {
45 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
46 	sdram_init();
47 #endif
48 
49 	/* dram_init must store complete ramsize in gd->ram_size */
50 	gd->ram_size = get_ram_size(
51 			(void *)CONFIG_SYS_SDRAM_BASE,
52 			CONFIG_MAX_RAM_BANK_SIZE);
53 	return 0;
54 }
55 
56 int dram_init_banksize(void)
57 {
58 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
59 	gd->bd->bi_dram[0].size = gd->ram_size;
60 
61 	return 0;
62 }
63 
64 #if !CONFIG_IS_ENABLED(OF_CONTROL)
65 static const struct ns16550_platdata am33xx_serial[] = {
66 	{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
67 	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
68 # ifdef CONFIG_SYS_NS16550_COM2
69 	{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
70 	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
71 #  ifdef CONFIG_SYS_NS16550_COM3
72 	{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
73 	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
74 	{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
75 	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
76 	{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
77 	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
78 	{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
79 	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
80 #  endif
81 # endif
82 };
83 
84 U_BOOT_DEVICES(am33xx_uarts) = {
85 	{ "ns16550_serial", &am33xx_serial[0] },
86 #  ifdef CONFIG_SYS_NS16550_COM2
87 	{ "ns16550_serial", &am33xx_serial[1] },
88 #   ifdef CONFIG_SYS_NS16550_COM3
89 	{ "ns16550_serial", &am33xx_serial[2] },
90 	{ "ns16550_serial", &am33xx_serial[3] },
91 	{ "ns16550_serial", &am33xx_serial[4] },
92 	{ "ns16550_serial", &am33xx_serial[5] },
93 #   endif
94 #  endif
95 };
96 
97 #ifdef CONFIG_DM_GPIO
98 static const struct omap_gpio_platdata am33xx_gpio[] = {
99 	{ 0, AM33XX_GPIO0_BASE },
100 	{ 1, AM33XX_GPIO1_BASE },
101 	{ 2, AM33XX_GPIO2_BASE },
102 	{ 3, AM33XX_GPIO3_BASE },
103 #ifdef CONFIG_AM43XX
104 	{ 4, AM33XX_GPIO4_BASE },
105 	{ 5, AM33XX_GPIO5_BASE },
106 #endif
107 };
108 
109 U_BOOT_DEVICES(am33xx_gpios) = {
110 	{ "gpio_omap", &am33xx_gpio[0] },
111 	{ "gpio_omap", &am33xx_gpio[1] },
112 	{ "gpio_omap", &am33xx_gpio[2] },
113 	{ "gpio_omap", &am33xx_gpio[3] },
114 #ifdef CONFIG_AM43XX
115 	{ "gpio_omap", &am33xx_gpio[4] },
116 	{ "gpio_omap", &am33xx_gpio[5] },
117 #endif
118 };
119 #endif
120 #endif
121 
122 #ifndef CONFIG_DM_GPIO
123 static const struct gpio_bank gpio_bank_am33xx[] = {
124 	{ (void *)AM33XX_GPIO0_BASE },
125 	{ (void *)AM33XX_GPIO1_BASE },
126 	{ (void *)AM33XX_GPIO2_BASE },
127 	{ (void *)AM33XX_GPIO3_BASE },
128 #ifdef CONFIG_AM43XX
129 	{ (void *)AM33XX_GPIO4_BASE },
130 	{ (void *)AM33XX_GPIO5_BASE },
131 #endif
132 };
133 
134 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
135 #endif
136 
137 #if defined(CONFIG_MMC_OMAP_HS)
138 int cpu_mmc_init(bd_t *bis)
139 {
140 	int ret;
141 
142 	ret = omap_mmc_init(0, 0, 0, -1, -1);
143 	if (ret)
144 		return ret;
145 
146 	return omap_mmc_init(1, 0, 0, -1, -1);
147 }
148 #endif
149 
150 /* AM33XX has two MUSB controllers which can be host or gadget */
151 #if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
152 	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
153 	(!defined(CONFIG_DM_USB))
154 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
155 
156 /* USB 2.0 PHY Control */
157 #define CM_PHY_PWRDN			(1 << 0)
158 #define CM_PHY_OTG_PWRDN		(1 << 1)
159 #define OTGVDET_EN			(1 << 19)
160 #define OTGSESSENDEN			(1 << 20)
161 
162 static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
163 {
164 	if (on) {
165 		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
166 				OTGVDET_EN | OTGSESSENDEN);
167 	} else {
168 		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
169 	}
170 }
171 
172 static struct musb_hdrc_config musb_config = {
173 	.multipoint     = 1,
174 	.dyn_fifo       = 1,
175 	.num_eps        = 16,
176 	.ram_bits       = 12,
177 };
178 
179 #ifdef CONFIG_AM335X_USB0
180 static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on)
181 {
182 	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
183 }
184 
185 struct omap_musb_board_data otg0_board_data = {
186 	.set_phy_power = am33xx_otg0_set_phy_power,
187 };
188 
189 static struct musb_hdrc_platform_data otg0_plat = {
190 	.mode           = CONFIG_AM335X_USB0_MODE,
191 	.config         = &musb_config,
192 	.power          = 50,
193 	.platform_ops	= &musb_dsps_ops,
194 	.board_data	= &otg0_board_data,
195 };
196 #endif
197 
198 #ifdef CONFIG_AM335X_USB1
199 static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on)
200 {
201 	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
202 }
203 
204 struct omap_musb_board_data otg1_board_data = {
205 	.set_phy_power = am33xx_otg1_set_phy_power,
206 };
207 
208 static struct musb_hdrc_platform_data otg1_plat = {
209 	.mode           = CONFIG_AM335X_USB1_MODE,
210 	.config         = &musb_config,
211 	.power          = 50,
212 	.platform_ops	= &musb_dsps_ops,
213 	.board_data	= &otg1_board_data,
214 };
215 #endif
216 
217 int arch_misc_init(void)
218 {
219 #ifdef CONFIG_AM335X_USB0
220 	musb_register(&otg0_plat, &otg0_board_data,
221 		(void *)USB0_OTG_BASE);
222 #endif
223 #ifdef CONFIG_AM335X_USB1
224 	musb_register(&otg1_plat, &otg1_board_data,
225 		(void *)USB1_OTG_BASE);
226 #endif
227 	return 0;
228 }
229 
230 #else	/* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
231 
232 int arch_misc_init(void)
233 {
234 	struct udevice *dev;
235 	int ret;
236 
237 	ret = uclass_first_device(UCLASS_MISC, &dev);
238 	if (ret || !dev)
239 		return ret;
240 
241 #if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
242 	ret = usb_ether_init();
243 	if (ret) {
244 		pr_err("USB ether init failed\n");
245 		return ret;
246 	}
247 #endif
248 
249 	return 0;
250 }
251 
252 #endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
253 
254 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
255 /*
256  * In the case of non-SPL based booting we'll want to call these
257  * functions a tiny bit later as it will require gd to be set and cleared
258  * and that's not true in s_init in this case so we cannot do it there.
259  */
260 int board_early_init_f(void)
261 {
262 	prcm_init();
263 	set_mux_conf_regs();
264 
265 	return 0;
266 }
267 
268 /*
269  * This function is the place to do per-board things such as ramp up the
270  * MPU clock frequency.
271  */
272 __weak void am33xx_spl_board_init(void)
273 {
274 }
275 
276 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
277 static void rtc32k_enable(void)
278 {
279 	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
280 
281 	/*
282 	 * Unlock the RTC's registers.  For more details please see the
283 	 * RTC_SS section of the TRM.  In order to unlock we need to
284 	 * write these specific values (keys) in this order.
285 	 */
286 	writel(RTC_KICK0R_WE, &rtc->kick0r);
287 	writel(RTC_KICK1R_WE, &rtc->kick1r);
288 
289 	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
290 	writel((1 << 3) | (1 << 6), &rtc->osc);
291 }
292 #endif
293 
294 static void uart_soft_reset(void)
295 {
296 	struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
297 	u32 regval;
298 
299 	regval = readl(&uart_base->uartsyscfg);
300 	regval |= UART_RESET;
301 	writel(regval, &uart_base->uartsyscfg);
302 	while ((readl(&uart_base->uartsyssts) &
303 		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
304 		;
305 
306 	/* Disable smart idle */
307 	regval = readl(&uart_base->uartsyscfg);
308 	regval |= UART_SMART_IDLE_EN;
309 	writel(regval, &uart_base->uartsyscfg);
310 }
311 
312 static void watchdog_disable(void)
313 {
314 	struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
315 
316 	writel(0xAAAA, &wdtimer->wdtwspr);
317 	while (readl(&wdtimer->wdtwwps) != 0x0)
318 		;
319 	writel(0x5555, &wdtimer->wdtwspr);
320 	while (readl(&wdtimer->wdtwwps) != 0x0)
321 		;
322 }
323 
324 void s_init(void)
325 {
326 }
327 
328 void early_system_init(void)
329 {
330 	/*
331 	 * The ROM will only have set up sufficient pinmux to allow for the
332 	 * first 4KiB NOR to be read, we must finish doing what we know of
333 	 * the NOR mux in this space in order to continue.
334 	 */
335 #ifdef CONFIG_NOR_BOOT
336 	enable_norboot_pin_mux();
337 #endif
338 	watchdog_disable();
339 	set_uart_mux_conf();
340 	setup_early_clocks();
341 	uart_soft_reset();
342 #ifdef CONFIG_SPL_BUILD
343 	/*
344 	 * Save the boot parameters passed from romcode.
345 	 * We cannot delay the saving further than this,
346 	 * to prevent overwrites.
347 	 */
348 	save_omap_boot_params();
349 #endif
350 #ifdef CONFIG_DEBUG_UART_OMAP
351 	debug_uart_init();
352 #endif
353 #ifdef CONFIG_TI_I2C_BOARD_DETECT
354 	do_board_detect();
355 #endif
356 #ifdef CONFIG_SPL_BUILD
357 	spl_early_init();
358 #endif
359 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
360 	/* Enable RTC32K clock */
361 	rtc32k_enable();
362 #endif
363 }
364 
365 #ifdef CONFIG_SPL_BUILD
366 void board_init_f(ulong dummy)
367 {
368 	hw_data_init();
369 	early_system_init();
370 	board_early_init_f();
371 	sdram_init();
372 	/* dram_init must store complete ramsize in gd->ram_size */
373 	gd->ram_size = get_ram_size(
374 			(void *)CONFIG_SYS_SDRAM_BASE,
375 			CONFIG_MAX_RAM_BANK_SIZE);
376 }
377 #endif
378 
379 #endif
380 
381 int arch_cpu_init_dm(void)
382 {
383 	hw_data_init();
384 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
385 	early_system_init();
386 #endif
387 	return 0;
388 }
389