1 /* 2 * board.c 3 * 4 * Common board functions for AM33XX based boards 5 * 6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <dm.h> 13 #include <errno.h> 14 #include <ns16550.h> 15 #include <spl.h> 16 #include <asm/arch/cpu.h> 17 #include <asm/arch/hardware.h> 18 #include <asm/arch/omap.h> 19 #include <asm/arch/ddr_defs.h> 20 #include <asm/arch/clock.h> 21 #include <asm/arch/gpio.h> 22 #include <asm/arch/mem.h> 23 #include <asm/arch/mmc_host_def.h> 24 #include <asm/arch/sys_proto.h> 25 #include <asm/io.h> 26 #include <asm/emif.h> 27 #include <asm/gpio.h> 28 #include <i2c.h> 29 #include <miiphy.h> 30 #include <cpsw.h> 31 #include <linux/errno.h> 32 #include <linux/compiler.h> 33 #include <linux/usb/ch9.h> 34 #include <linux/usb/gadget.h> 35 #include <linux/usb/musb.h> 36 #include <asm/omap_musb.h> 37 #include <asm/davinci_rtc.h> 38 39 DECLARE_GLOBAL_DATA_PTR; 40 41 #if !CONFIG_IS_ENABLED(OF_CONTROL) 42 static const struct ns16550_platdata am33xx_serial[] = { 43 { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, 44 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, }, 45 # ifdef CONFIG_SYS_NS16550_COM2 46 { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, 47 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, }, 48 # ifdef CONFIG_SYS_NS16550_COM3 49 { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, 50 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, }, 51 { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, 52 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, }, 53 { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, 54 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, }, 55 { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, 56 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, }, 57 # endif 58 # endif 59 }; 60 61 U_BOOT_DEVICES(am33xx_uarts) = { 62 { "ns16550_serial", &am33xx_serial[0] }, 63 # ifdef CONFIG_SYS_NS16550_COM2 64 { "ns16550_serial", &am33xx_serial[1] }, 65 # ifdef CONFIG_SYS_NS16550_COM3 66 { "ns16550_serial", &am33xx_serial[2] }, 67 { "ns16550_serial", &am33xx_serial[3] }, 68 { "ns16550_serial", &am33xx_serial[4] }, 69 { "ns16550_serial", &am33xx_serial[5] }, 70 # endif 71 # endif 72 }; 73 74 #ifdef CONFIG_DM_GPIO 75 static const struct omap_gpio_platdata am33xx_gpio[] = { 76 { 0, AM33XX_GPIO0_BASE }, 77 { 1, AM33XX_GPIO1_BASE }, 78 { 2, AM33XX_GPIO2_BASE }, 79 { 3, AM33XX_GPIO3_BASE }, 80 #ifdef CONFIG_AM43XX 81 { 4, AM33XX_GPIO4_BASE }, 82 { 5, AM33XX_GPIO5_BASE }, 83 #endif 84 }; 85 86 U_BOOT_DEVICES(am33xx_gpios) = { 87 { "gpio_omap", &am33xx_gpio[0] }, 88 { "gpio_omap", &am33xx_gpio[1] }, 89 { "gpio_omap", &am33xx_gpio[2] }, 90 { "gpio_omap", &am33xx_gpio[3] }, 91 #ifdef CONFIG_AM43XX 92 { "gpio_omap", &am33xx_gpio[4] }, 93 { "gpio_omap", &am33xx_gpio[5] }, 94 #endif 95 }; 96 #endif 97 #endif 98 99 #ifndef CONFIG_DM_GPIO 100 static const struct gpio_bank gpio_bank_am33xx[] = { 101 { (void *)AM33XX_GPIO0_BASE }, 102 { (void *)AM33XX_GPIO1_BASE }, 103 { (void *)AM33XX_GPIO2_BASE }, 104 { (void *)AM33XX_GPIO3_BASE }, 105 #ifdef CONFIG_AM43XX 106 { (void *)AM33XX_GPIO4_BASE }, 107 { (void *)AM33XX_GPIO5_BASE }, 108 #endif 109 }; 110 111 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; 112 #endif 113 114 #if defined(CONFIG_MMC_OMAP_HS) 115 int cpu_mmc_init(bd_t *bis) 116 { 117 int ret; 118 119 ret = omap_mmc_init(0, 0, 0, -1, -1); 120 if (ret) 121 return ret; 122 123 return omap_mmc_init(1, 0, 0, -1, -1); 124 } 125 #endif 126 127 /* AM33XX has two MUSB controllers which can be host or gadget */ 128 #if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \ 129 (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \ 130 (!defined(CONFIG_DM_USB)) 131 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; 132 133 /* USB 2.0 PHY Control */ 134 #define CM_PHY_PWRDN (1 << 0) 135 #define CM_PHY_OTG_PWRDN (1 << 1) 136 #define OTGVDET_EN (1 << 19) 137 #define OTGSESSENDEN (1 << 20) 138 139 static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) 140 { 141 if (on) { 142 clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, 143 OTGVDET_EN | OTGSESSENDEN); 144 } else { 145 clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); 146 } 147 } 148 149 static struct musb_hdrc_config musb_config = { 150 .multipoint = 1, 151 .dyn_fifo = 1, 152 .num_eps = 16, 153 .ram_bits = 12, 154 }; 155 156 #ifdef CONFIG_AM335X_USB0 157 static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on) 158 { 159 am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); 160 } 161 162 struct omap_musb_board_data otg0_board_data = { 163 .set_phy_power = am33xx_otg0_set_phy_power, 164 }; 165 166 static struct musb_hdrc_platform_data otg0_plat = { 167 .mode = CONFIG_AM335X_USB0_MODE, 168 .config = &musb_config, 169 .power = 50, 170 .platform_ops = &musb_dsps_ops, 171 .board_data = &otg0_board_data, 172 }; 173 #endif 174 175 #ifdef CONFIG_AM335X_USB1 176 static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on) 177 { 178 am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); 179 } 180 181 struct omap_musb_board_data otg1_board_data = { 182 .set_phy_power = am33xx_otg1_set_phy_power, 183 }; 184 185 static struct musb_hdrc_platform_data otg1_plat = { 186 .mode = CONFIG_AM335X_USB1_MODE, 187 .config = &musb_config, 188 .power = 50, 189 .platform_ops = &musb_dsps_ops, 190 .board_data = &otg1_board_data, 191 }; 192 #endif 193 #endif 194 195 int arch_misc_init(void) 196 { 197 #ifndef CONFIG_DM_USB 198 #ifdef CONFIG_AM335X_USB0 199 musb_register(&otg0_plat, &otg0_board_data, 200 (void *)USB0_OTG_BASE); 201 #endif 202 #ifdef CONFIG_AM335X_USB1 203 musb_register(&otg1_plat, &otg1_board_data, 204 (void *)USB1_OTG_BASE); 205 #endif 206 #else 207 struct udevice *dev; 208 int ret; 209 210 ret = uclass_first_device(UCLASS_MISC, &dev); 211 if (ret || !dev) 212 return ret; 213 214 #if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER) 215 ret = usb_ether_init(); 216 if (ret) { 217 error("USB ether init failed\n"); 218 return ret; 219 } 220 #endif 221 #endif 222 return 0; 223 } 224 225 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 226 /* 227 * In the case of non-SPL based booting we'll want to call these 228 * functions a tiny bit later as it will require gd to be set and cleared 229 * and that's not true in s_init in this case so we cannot do it there. 230 */ 231 int board_early_init_f(void) 232 { 233 prcm_init(); 234 set_mux_conf_regs(); 235 236 return 0; 237 } 238 239 /* 240 * This function is the place to do per-board things such as ramp up the 241 * MPU clock frequency. 242 */ 243 __weak void am33xx_spl_board_init(void) 244 { 245 do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); 246 do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); 247 } 248 249 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) 250 static void rtc32k_enable(void) 251 { 252 struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE; 253 254 /* 255 * Unlock the RTC's registers. For more details please see the 256 * RTC_SS section of the TRM. In order to unlock we need to 257 * write these specific values (keys) in this order. 258 */ 259 writel(RTC_KICK0R_WE, &rtc->kick0r); 260 writel(RTC_KICK1R_WE, &rtc->kick1r); 261 262 /* Enable the RTC 32K OSC by setting bits 3 and 6. */ 263 writel((1 << 3) | (1 << 6), &rtc->osc); 264 } 265 #endif 266 267 static void uart_soft_reset(void) 268 { 269 struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; 270 u32 regval; 271 272 regval = readl(&uart_base->uartsyscfg); 273 regval |= UART_RESET; 274 writel(regval, &uart_base->uartsyscfg); 275 while ((readl(&uart_base->uartsyssts) & 276 UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) 277 ; 278 279 /* Disable smart idle */ 280 regval = readl(&uart_base->uartsyscfg); 281 regval |= UART_SMART_IDLE_EN; 282 writel(regval, &uart_base->uartsyscfg); 283 } 284 285 static void watchdog_disable(void) 286 { 287 struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; 288 289 writel(0xAAAA, &wdtimer->wdtwspr); 290 while (readl(&wdtimer->wdtwwps) != 0x0) 291 ; 292 writel(0x5555, &wdtimer->wdtwspr); 293 while (readl(&wdtimer->wdtwwps) != 0x0) 294 ; 295 } 296 297 void s_init(void) 298 { 299 } 300 301 void early_system_init(void) 302 { 303 /* 304 * The ROM will only have set up sufficient pinmux to allow for the 305 * first 4KiB NOR to be read, we must finish doing what we know of 306 * the NOR mux in this space in order to continue. 307 */ 308 #ifdef CONFIG_NOR_BOOT 309 enable_norboot_pin_mux(); 310 #endif 311 watchdog_disable(); 312 set_uart_mux_conf(); 313 setup_early_clocks(); 314 uart_soft_reset(); 315 #ifdef CONFIG_TI_I2C_BOARD_DETECT 316 do_board_detect(); 317 #endif 318 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) 319 /* Enable RTC32K clock */ 320 rtc32k_enable(); 321 #endif 322 } 323 324 #ifdef CONFIG_SPL_BUILD 325 void board_init_f(ulong dummy) 326 { 327 early_system_init(); 328 board_early_init_f(); 329 sdram_init(); 330 /* dram_init must store complete ramsize in gd->ram_size */ 331 gd->ram_size = get_ram_size( 332 (void *)CONFIG_SYS_SDRAM_BASE, 333 CONFIG_MAX_RAM_BANK_SIZE); 334 } 335 #endif 336 337 #endif 338 339 int arch_cpu_init_dm(void) 340 { 341 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 342 early_system_init(); 343 #endif 344 return 0; 345 } 346