1if AM33XX 2 3config AM33XX_CHILISOM 4 bool 5 select SUPPORT_SPL 6 7choice 8 prompt "AM33xx board select" 9 optional 10 11config TARGET_AM335X_EVM 12 bool "Support am335x_evm" 13 select BOARD_LATE_INIT 14 select DM 15 select DM_SERIAL 16 select DM_GPIO 17 select TI_I2C_BOARD_DETECT 18 imply SPL_ENV_SUPPORT 19 imply SPL_EXT_SUPPORT 20 imply SPL_FAT_SUPPORT 21 imply SPL_GPIO_SUPPORT 22 imply SPL_I2C_SUPPORT 23 imply SPL_LIBCOMMON_SUPPORT 24 imply SPL_LIBDISK_SUPPORT 25 imply SPL_LIBGENERIC_SUPPORT 26 imply SPL_MMC_SUPPORT 27 imply SPL_NAND_SUPPORT 28 imply SPL_POWER_SUPPORT 29 imply SPL_SERIAL_SUPPORT 30 imply SPL_WATCHDOG_SUPPORT 31 imply SPL_YMODEM_SUPPORT 32 help 33 This option specifies support for the AM335x 34 GP and HS EVM development platforms. The AM335x 35 GP EVM is a standalone test, development, and 36 evaluation module system that enables developers 37 to write software and develop hardware around 38 an AM335x processor subsystem. 39 40config TARGET_AM335X_BALTOS 41 bool "Support am335x_baltos" 42 select BOARD_LATE_INIT 43 select DM 44 select DM_SERIAL 45 select DM_GPIO 46 47config TARGET_AM335X_IGEP003X 48 bool "Support am335x_igep003x" 49 select BOARD_LATE_INIT 50 select DM 51 select DM_SERIAL 52 select DM_GPIO 53 54config TARGET_AM335X_SHC 55 bool "Support am335x based shc board from bosch" 56 select BOARD_LATE_INIT 57 select DM 58 select DM_SERIAL 59 select DM_GPIO 60 61config TARGET_AM335X_SL50 62 bool "Support am335x_sl50" 63 select BOARD_LATE_INIT 64 select DM 65 select DM_SERIAL 66 select DM_GPIO 67 68config TARGET_BAV335X 69 bool "Support bav335x" 70 select BOARD_LATE_INIT 71 select DM 72 select DM_SERIAL 73 help 74 The BAV335x OEM Network Processor integrates all the functions of an 75 embedded network computer in a small, easy to use SODIMM module which 76 incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8 77 processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit 78 ethernet with simple connection to external connectors. 79 80 For more information, visit: http://birdland.com/oem 81 82config TARGET_CHILIBOARD 83 bool "Grinn chiliBoard" 84 select AM33XX_CHILISOM 85 select BOARD_LATE_INIT 86 select DM 87 select DM_SERIAL 88 89config TARGET_CM_T335 90 bool "Support cm_t335" 91 select DM 92 select DM_SERIAL 93 select DM_GPIO 94 95config TARGET_PCM051 96 bool "Support pcm051" 97 select DM 98 select DM_SERIAL 99 select DM_GPIO 100 101config TARGET_PENGWYN 102 bool "Support pengwyn" 103 select DM 104 select DM_SERIAL 105 select DM_GPIO 106 107config TARGET_PEPPER 108 bool "Support pepper" 109 select DM 110 select DM_SERIAL 111 select DM_GPIO 112 113endchoice 114 115endif 116 117if AM43XX 118 119config TARGET_AM43XX_EVM 120 bool "Support am43xx_evm" 121 select BOARD_LATE_INIT 122 select TI_I2C_BOARD_DETECT 123 imply DM_ETH 124 imply DM_I2C 125 imply DM_SPI 126 imply DM_SPI_FLASH 127 imply SPI_FLASH_BAR 128 imply SPL_ENV_SUPPORT 129 imply SPL_EXT_SUPPORT 130 imply SPL_FAT_SUPPORT 131 imply SPL_GPIO_SUPPORT 132 imply SPL_I2C_SUPPORT 133 imply SPL_LIBCOMMON_SUPPORT 134 imply SPL_LIBDISK_SUPPORT 135 imply SPL_LIBGENERIC_SUPPORT 136 imply SPL_MMC_SUPPORT 137 imply SPL_NAND_SUPPORT 138 imply SPL_POWER_SUPPORT 139 imply SPL_SERIAL_SUPPORT 140 imply SPL_WATCHDOG_SUPPORT 141 imply SPL_YMODEM_SUPPORT 142 help 143 This option specifies support for the AM43xx 144 GP and HS EVM development platforms.The AM437x 145 GP EVM is a standalone test, development, and 146 evaluation module system that enables developers 147 to write software and develop hardware around 148 an AM43xx processor subsystem. 149endif 150 151if AM43XX || AM33XX 152config ISW_ENTRY_ADDR 153 hex "Address in memory or XIP flash of bootloader entry point" 154 help 155 After any reset, the boot ROM on the AM43XX SOC 156 searches the boot media for a valid boot image. 157 For non-XIP devices, the ROM then copies the 158 image into internal memory. 159 For all boot modes, after the ROM processes the 160 boot image it eventually computes the entry 161 point address depending on the device type 162 (secure/non-secure), boot media (xip/non-xip) and 163 image headers. 164 default 0x402F4000 if AM43XX 165 default 0x402F0400 if AM33XX 166 167config PUB_ROM_DATA_SIZE 168 hex "Size in bytes of the L3 SRAM reserved by ROM to store data" 169 help 170 During the device boot, the public ROM uses the top of 171 the public L3 OCMC RAM to store r/w data like stack, 172 heap, globals etc. When the ROM is copying the boot 173 image from the boot media into memory, the image must 174 not spill over into this area. This value can be used 175 during compile time to determine the maximum size of a 176 boot image. Once the ROM transfers control to the boot 177 image, this area is no longer used, and can be reclaimed 178 for run time use by the boot image. 179 default 0x8400 180endif 181