1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Address map functions for Marvell EBU SoCs (Kirkwood, Armada 4 * 370/XP, Dove, Orion5x and MV78xx0) 5 * 6 * Ported from the Barebox version to U-Boot by: 7 * Stefan Roese <sr@denx.de> 8 * 9 * The Barebox version is: 10 * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> 11 * 12 * based on mbus driver from Linux 13 * (C) Copyright 2008 Marvell Semiconductor 14 * 15 * The Marvell EBU SoCs have a configurable physical address space: 16 * the physical address at which certain devices (PCIe, NOR, NAND, 17 * etc.) sit can be configured. The configuration takes place through 18 * two sets of registers: 19 * 20 * - One to configure the access of the CPU to the devices. Depending 21 * on the families, there are between 8 and 20 configurable windows, 22 * each can be use to create a physical memory window that maps to a 23 * specific device. Devices are identified by a tuple (target, 24 * attribute). 25 * 26 * - One to configure the access to the CPU to the SDRAM. There are 27 * either 2 (for Dove) or 4 (for other families) windows to map the 28 * SDRAM into the physical address space. 29 * 30 * This driver: 31 * 32 * - Reads out the SDRAM address decoding windows at initialization 33 * time, and fills the mbus_dram_info structure with these 34 * informations. The exported function mv_mbus_dram_info() allow 35 * device drivers to get those informations related to the SDRAM 36 * address decoding windows. This is because devices also have their 37 * own windows (configured through registers that are part of each 38 * device register space), and therefore the drivers for Marvell 39 * devices have to configure those device -> SDRAM windows to ensure 40 * that DMA works properly. 41 * 42 * - Provides an API for platform code or device drivers to 43 * dynamically add or remove address decoding windows for the CPU -> 44 * device accesses. This API is mvebu_mbus_add_window_by_id(), 45 * mvebu_mbus_add_window_remap_by_id() and 46 * mvebu_mbus_del_window(). 47 */ 48 49 #include <common.h> 50 #include <linux/errno.h> 51 #include <asm/io.h> 52 #include <asm/arch/cpu.h> 53 #include <asm/arch/soc.h> 54 #include <linux/log2.h> 55 #include <linux/mbus.h> 56 57 /* DDR target is the same on all platforms */ 58 #define TARGET_DDR 0 59 60 /* CPU Address Decode Windows registers */ 61 #define WIN_CTRL_OFF 0x0000 62 #define WIN_CTRL_ENABLE BIT(0) 63 #define WIN_CTRL_TGT_MASK 0xf0 64 #define WIN_CTRL_TGT_SHIFT 4 65 #define WIN_CTRL_ATTR_MASK 0xff00 66 #define WIN_CTRL_ATTR_SHIFT 8 67 #define WIN_CTRL_SIZE_MASK 0xffff0000 68 #define WIN_CTRL_SIZE_SHIFT 16 69 #define WIN_BASE_OFF 0x0004 70 #define WIN_BASE_LOW 0xffff0000 71 #define WIN_BASE_HIGH 0xf 72 #define WIN_REMAP_LO_OFF 0x0008 73 #define WIN_REMAP_LOW 0xffff0000 74 #define WIN_REMAP_HI_OFF 0x000c 75 76 #define ATTR_HW_COHERENCY (0x1 << 4) 77 78 #define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) 79 #define DDR_BASE_CS_HIGH_MASK 0xf 80 #define DDR_BASE_CS_LOW_MASK 0xff000000 81 #define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) 82 #define DDR_SIZE_ENABLED BIT(0) 83 #define DDR_SIZE_CS_MASK 0x1c 84 #define DDR_SIZE_CS_SHIFT 2 85 #define DDR_SIZE_MASK 0xff000000 86 87 #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) 88 89 struct mvebu_mbus_state; 90 91 struct mvebu_mbus_soc_data { 92 unsigned int num_wins; 93 unsigned int num_remappable_wins; 94 unsigned int (*win_cfg_offset)(const int win); 95 void (*setup_cpu_target)(struct mvebu_mbus_state *s); 96 }; 97 98 struct mvebu_mbus_state mbus_state 99 __attribute__ ((section(".data"))); 100 static struct mbus_dram_target_info mbus_dram_info 101 __attribute__ ((section(".data"))); 102 103 /* 104 * Functions to manipulate the address decoding windows 105 */ 106 107 static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, 108 int win, int *enabled, u64 *base, 109 u32 *size, u8 *target, u8 *attr, 110 u64 *remap) 111 { 112 void __iomem *addr = mbus->mbuswins_base + 113 mbus->soc->win_cfg_offset(win); 114 u32 basereg = readl(addr + WIN_BASE_OFF); 115 u32 ctrlreg = readl(addr + WIN_CTRL_OFF); 116 117 if (!(ctrlreg & WIN_CTRL_ENABLE)) { 118 *enabled = 0; 119 return; 120 } 121 122 *enabled = 1; 123 *base = ((u64)basereg & WIN_BASE_HIGH) << 32; 124 *base |= (basereg & WIN_BASE_LOW); 125 *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; 126 127 if (target) 128 *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; 129 130 if (attr) 131 *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; 132 133 if (remap) { 134 if (win < mbus->soc->num_remappable_wins) { 135 u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); 136 u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); 137 *remap = ((u64)remap_hi << 32) | remap_low; 138 } else { 139 *remap = 0; 140 } 141 } 142 } 143 144 static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, 145 int win) 146 { 147 void __iomem *addr; 148 149 addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); 150 151 writel(0, addr + WIN_BASE_OFF); 152 writel(0, addr + WIN_CTRL_OFF); 153 if (win < mbus->soc->num_remappable_wins) { 154 writel(0, addr + WIN_REMAP_LO_OFF); 155 writel(0, addr + WIN_REMAP_HI_OFF); 156 } 157 } 158 159 /* Checks whether the given window number is available */ 160 static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, 161 const int win) 162 { 163 void __iomem *addr = mbus->mbuswins_base + 164 mbus->soc->win_cfg_offset(win); 165 u32 ctrl = readl(addr + WIN_CTRL_OFF); 166 return !(ctrl & WIN_CTRL_ENABLE); 167 } 168 169 /* 170 * Checks whether the given (base, base+size) area doesn't overlap an 171 * existing region 172 */ 173 static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, 174 phys_addr_t base, size_t size, 175 u8 target, u8 attr) 176 { 177 u64 end = (u64)base + size; 178 int win; 179 180 for (win = 0; win < mbus->soc->num_wins; win++) { 181 u64 wbase, wend; 182 u32 wsize; 183 u8 wtarget, wattr; 184 int enabled; 185 186 mvebu_mbus_read_window(mbus, win, 187 &enabled, &wbase, &wsize, 188 &wtarget, &wattr, NULL); 189 190 if (!enabled) 191 continue; 192 193 wend = wbase + wsize; 194 195 /* 196 * Check if the current window overlaps with the 197 * proposed physical range 198 */ 199 if ((u64)base < wend && end > wbase) 200 return 0; 201 202 /* 203 * Check if target/attribute conflicts 204 */ 205 if (target == wtarget && attr == wattr) 206 return 0; 207 } 208 209 return 1; 210 } 211 212 static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, 213 phys_addr_t base, size_t size) 214 { 215 int win; 216 217 for (win = 0; win < mbus->soc->num_wins; win++) { 218 u64 wbase; 219 u32 wsize; 220 int enabled; 221 222 mvebu_mbus_read_window(mbus, win, 223 &enabled, &wbase, &wsize, 224 NULL, NULL, NULL); 225 226 if (!enabled) 227 continue; 228 229 if (base == wbase && size == wsize) 230 return win; 231 } 232 233 return -ENODEV; 234 } 235 236 static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, 237 int win, phys_addr_t base, size_t size, 238 phys_addr_t remap, u8 target, 239 u8 attr) 240 { 241 void __iomem *addr = mbus->mbuswins_base + 242 mbus->soc->win_cfg_offset(win); 243 u32 ctrl, remap_addr; 244 245 ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | 246 (attr << WIN_CTRL_ATTR_SHIFT) | 247 (target << WIN_CTRL_TGT_SHIFT) | 248 WIN_CTRL_ENABLE; 249 250 writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); 251 writel(ctrl, addr + WIN_CTRL_OFF); 252 if (win < mbus->soc->num_remappable_wins) { 253 if (remap == MVEBU_MBUS_NO_REMAP) 254 remap_addr = base; 255 else 256 remap_addr = remap; 257 writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); 258 writel(0, addr + WIN_REMAP_HI_OFF); 259 } 260 261 return 0; 262 } 263 264 static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, 265 phys_addr_t base, size_t size, 266 phys_addr_t remap, u8 target, 267 u8 attr) 268 { 269 int win; 270 271 if (remap == MVEBU_MBUS_NO_REMAP) { 272 for (win = mbus->soc->num_remappable_wins; 273 win < mbus->soc->num_wins; win++) 274 if (mvebu_mbus_window_is_free(mbus, win)) 275 return mvebu_mbus_setup_window(mbus, win, base, 276 size, remap, 277 target, attr); 278 } 279 280 281 for (win = 0; win < mbus->soc->num_wins; win++) 282 if (mvebu_mbus_window_is_free(mbus, win)) 283 return mvebu_mbus_setup_window(mbus, win, base, size, 284 remap, target, attr); 285 286 return -ENOMEM; 287 } 288 289 /* 290 * SoC-specific functions and definitions 291 */ 292 293 static unsigned int armada_370_xp_mbus_win_offset(int win) 294 { 295 /* The register layout is a bit annoying and the below code 296 * tries to cope with it. 297 * - At offset 0x0, there are the registers for the first 8 298 * windows, with 4 registers of 32 bits per window (ctrl, 299 * base, remap low, remap high) 300 * - Then at offset 0x80, there is a hole of 0x10 bytes for 301 * the internal registers base address and internal units 302 * sync barrier register. 303 * - Then at offset 0x90, there the registers for 12 304 * windows, with only 2 registers of 32 bits per window 305 * (ctrl, base). 306 */ 307 if (win < 8) 308 return win << 4; 309 else 310 return 0x90 + ((win - 8) << 3); 311 } 312 313 static unsigned int orion5x_mbus_win_offset(int win) 314 { 315 return win << 4; 316 } 317 318 static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) 319 { 320 int i; 321 int cs; 322 323 mbus_dram_info.mbus_dram_target_id = TARGET_DDR; 324 325 for (i = 0, cs = 0; i < 4; i++) { 326 u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); 327 u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); 328 329 /* 330 * We only take care of entries for which the chip 331 * select is enabled, and that don't have high base 332 * address bits set (devices can only access the first 333 * 32 bits of the memory). 334 */ 335 if ((size & DDR_SIZE_ENABLED) && 336 !(base & DDR_BASE_CS_HIGH_MASK)) { 337 struct mbus_dram_window *w; 338 339 w = &mbus_dram_info.cs[cs++]; 340 w->cs_index = i; 341 w->mbus_attr = 0xf & ~(1 << i); 342 w->base = base & DDR_BASE_CS_LOW_MASK; 343 w->size = (size | ~DDR_SIZE_MASK) + 1; 344 } 345 } 346 mbus_dram_info.num_cs = cs; 347 } 348 349 static const struct mvebu_mbus_soc_data 350 armada_370_xp_mbus_data __maybe_unused = { 351 .num_wins = 20, 352 .num_remappable_wins = 8, 353 .win_cfg_offset = armada_370_xp_mbus_win_offset, 354 .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, 355 }; 356 357 static const struct mvebu_mbus_soc_data 358 kirkwood_mbus_data __maybe_unused = { 359 .num_wins = 8, 360 .num_remappable_wins = 4, 361 .win_cfg_offset = orion5x_mbus_win_offset, 362 .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, 363 }; 364 365 /* 366 * Public API of the driver 367 */ 368 const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) 369 { 370 return &mbus_dram_info; 371 } 372 373 int mvebu_mbus_add_window_remap_by_id(unsigned int target, 374 unsigned int attribute, 375 phys_addr_t base, size_t size, 376 phys_addr_t remap) 377 { 378 struct mvebu_mbus_state *s = &mbus_state; 379 380 if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { 381 printf("Cannot add window '%x:%x', conflicts with another window\n", 382 target, attribute); 383 return -EINVAL; 384 } 385 386 return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); 387 } 388 389 int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, 390 phys_addr_t base, size_t size) 391 { 392 return mvebu_mbus_add_window_remap_by_id(target, attribute, base, 393 size, MVEBU_MBUS_NO_REMAP); 394 } 395 396 int mvebu_mbus_del_window(phys_addr_t base, size_t size) 397 { 398 int win; 399 400 win = mvebu_mbus_find_window(&mbus_state, base, size); 401 if (win < 0) 402 return win; 403 404 mvebu_mbus_disable_window(&mbus_state, win); 405 return 0; 406 } 407 408 static void mvebu_mbus_get_lowest_base(struct mvebu_mbus_state *mbus, 409 phys_addr_t *base) 410 { 411 int win; 412 *base = 0xffffffff; 413 414 for (win = 0; win < mbus->soc->num_wins; win++) { 415 u64 wbase; 416 u32 wsize; 417 u8 wtarget, wattr; 418 int enabled; 419 420 mvebu_mbus_read_window(mbus, win, 421 &enabled, &wbase, &wsize, 422 &wtarget, &wattr, NULL); 423 424 if (!enabled) 425 continue; 426 427 if (wbase < *base) 428 *base = wbase; 429 } 430 } 431 432 static void mvebu_config_mbus_bridge(struct mvebu_mbus_state *mbus) 433 { 434 phys_addr_t base; 435 u32 val; 436 u32 size; 437 438 /* Set MBUS bridge base/ctrl */ 439 mvebu_mbus_get_lowest_base(&mbus_state, &base); 440 441 size = 0xffffffff - base + 1; 442 if (!is_power_of_2(size)) { 443 /* Round up to next power of 2 */ 444 size = 1 << (ffs(base) + 1); 445 base = 0xffffffff - size + 1; 446 } 447 448 /* Now write base and size */ 449 writel(base, MBUS_BRIDGE_WIN_BASE_REG); 450 /* Align window size to 64KiB */ 451 val = (size / (64 << 10)) - 1; 452 writel((val << 16) | 0x1, MBUS_BRIDGE_WIN_CTRL_REG); 453 } 454 455 int mbus_dt_setup_win(struct mvebu_mbus_state *mbus, 456 u32 base, u32 size, u8 target, u8 attr) 457 { 458 if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { 459 printf("Cannot add window '%04x:%04x', conflicts with another window\n", 460 target, attr); 461 return -EBUSY; 462 } 463 464 /* 465 * In U-Boot we first try to add the mbus window to the remap windows. 466 * If this fails, lets try to add the windows to the non-remap windows. 467 */ 468 if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) { 469 if (mvebu_mbus_alloc_window(mbus, base, size, 470 MVEBU_MBUS_NO_REMAP, target, attr)) 471 return -ENOMEM; 472 } 473 474 /* 475 * Re-configure the mbus bridge registers each time this function 476 * is called. Since it may get called from the board code in 477 * later boot stages as well. 478 */ 479 mvebu_config_mbus_bridge(mbus); 480 481 return 0; 482 } 483 484 int mvebu_mbus_probe(struct mbus_win windows[], int count) 485 { 486 int win; 487 int ret; 488 int i; 489 490 #if defined(CONFIG_KIRKWOOD) 491 mbus_state.soc = &kirkwood_mbus_data; 492 #endif 493 #if defined(CONFIG_ARCH_MVEBU) 494 mbus_state.soc = &armada_370_xp_mbus_data; 495 #endif 496 497 mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE; 498 mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE; 499 500 for (win = 0; win < mbus_state.soc->num_wins; win++) 501 mvebu_mbus_disable_window(&mbus_state, win); 502 503 mbus_state.soc->setup_cpu_target(&mbus_state); 504 505 /* Setup statically declared windows in the DT */ 506 for (i = 0; i < count; i++) { 507 u32 base, size; 508 u8 target, attr; 509 510 target = windows[i].target; 511 attr = windows[i].attr; 512 base = windows[i].base; 513 size = windows[i].size; 514 ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr); 515 if (ret < 0) 516 return ret; 517 } 518 519 return 0; 520 } 521