1 /* 2 * Address map functions for Marvell EBU SoCs (Kirkwood, Armada 3 * 370/XP, Dove, Orion5x and MV78xx0) 4 * 5 * Ported from the Barebox version to U-Boot by: 6 * Stefan Roese <sr@denx.de> 7 * 8 * The Barebox version is: 9 * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> 10 * 11 * based on mbus driver from Linux 12 * (C) Copyright 2008 Marvell Semiconductor 13 * 14 * SPDX-License-Identifier: GPL-2.0 15 * 16 * The Marvell EBU SoCs have a configurable physical address space: 17 * the physical address at which certain devices (PCIe, NOR, NAND, 18 * etc.) sit can be configured. The configuration takes place through 19 * two sets of registers: 20 * 21 * - One to configure the access of the CPU to the devices. Depending 22 * on the families, there are between 8 and 20 configurable windows, 23 * each can be use to create a physical memory window that maps to a 24 * specific device. Devices are identified by a tuple (target, 25 * attribute). 26 * 27 * - One to configure the access to the CPU to the SDRAM. There are 28 * either 2 (for Dove) or 4 (for other families) windows to map the 29 * SDRAM into the physical address space. 30 * 31 * This driver: 32 * 33 * - Reads out the SDRAM address decoding windows at initialization 34 * time, and fills the mbus_dram_info structure with these 35 * informations. The exported function mv_mbus_dram_info() allow 36 * device drivers to get those informations related to the SDRAM 37 * address decoding windows. This is because devices also have their 38 * own windows (configured through registers that are part of each 39 * device register space), and therefore the drivers for Marvell 40 * devices have to configure those device -> SDRAM windows to ensure 41 * that DMA works properly. 42 * 43 * - Provides an API for platform code or device drivers to 44 * dynamically add or remove address decoding windows for the CPU -> 45 * device accesses. This API is mvebu_mbus_add_window_by_id(), 46 * mvebu_mbus_add_window_remap_by_id() and 47 * mvebu_mbus_del_window(). 48 */ 49 50 #include <common.h> 51 #include <asm/errno.h> 52 #include <asm/io.h> 53 #include <asm/arch/cpu.h> 54 #include <asm/arch/soc.h> 55 #include <linux/compat.h> 56 #include <linux/mbus.h> 57 58 /* DDR target is the same on all platforms */ 59 #define TARGET_DDR 0 60 61 /* CPU Address Decode Windows registers */ 62 #define WIN_CTRL_OFF 0x0000 63 #define WIN_CTRL_ENABLE BIT(0) 64 #define WIN_CTRL_TGT_MASK 0xf0 65 #define WIN_CTRL_TGT_SHIFT 4 66 #define WIN_CTRL_ATTR_MASK 0xff00 67 #define WIN_CTRL_ATTR_SHIFT 8 68 #define WIN_CTRL_SIZE_MASK 0xffff0000 69 #define WIN_CTRL_SIZE_SHIFT 16 70 #define WIN_BASE_OFF 0x0004 71 #define WIN_BASE_LOW 0xffff0000 72 #define WIN_BASE_HIGH 0xf 73 #define WIN_REMAP_LO_OFF 0x0008 74 #define WIN_REMAP_LOW 0xffff0000 75 #define WIN_REMAP_HI_OFF 0x000c 76 77 #define ATTR_HW_COHERENCY (0x1 << 4) 78 79 #define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) 80 #define DDR_BASE_CS_HIGH_MASK 0xf 81 #define DDR_BASE_CS_LOW_MASK 0xff000000 82 #define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) 83 #define DDR_SIZE_ENABLED BIT(0) 84 #define DDR_SIZE_CS_MASK 0x1c 85 #define DDR_SIZE_CS_SHIFT 2 86 #define DDR_SIZE_MASK 0xff000000 87 88 #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) 89 90 struct mvebu_mbus_state; 91 92 struct mvebu_mbus_soc_data { 93 unsigned int num_wins; 94 unsigned int num_remappable_wins; 95 unsigned int (*win_cfg_offset)(const int win); 96 void (*setup_cpu_target)(struct mvebu_mbus_state *s); 97 }; 98 99 struct mvebu_mbus_state mbus_state 100 __attribute__ ((section(".data"))); 101 static struct mbus_dram_target_info mbus_dram_info 102 __attribute__ ((section(".data"))); 103 104 /* 105 * Functions to manipulate the address decoding windows 106 */ 107 108 static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, 109 int win, int *enabled, u64 *base, 110 u32 *size, u8 *target, u8 *attr, 111 u64 *remap) 112 { 113 void __iomem *addr = mbus->mbuswins_base + 114 mbus->soc->win_cfg_offset(win); 115 u32 basereg = readl(addr + WIN_BASE_OFF); 116 u32 ctrlreg = readl(addr + WIN_CTRL_OFF); 117 118 if (!(ctrlreg & WIN_CTRL_ENABLE)) { 119 *enabled = 0; 120 return; 121 } 122 123 *enabled = 1; 124 *base = ((u64)basereg & WIN_BASE_HIGH) << 32; 125 *base |= (basereg & WIN_BASE_LOW); 126 *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; 127 128 if (target) 129 *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; 130 131 if (attr) 132 *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; 133 134 if (remap) { 135 if (win < mbus->soc->num_remappable_wins) { 136 u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); 137 u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); 138 *remap = ((u64)remap_hi << 32) | remap_low; 139 } else { 140 *remap = 0; 141 } 142 } 143 } 144 145 static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, 146 int win) 147 { 148 void __iomem *addr; 149 150 addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); 151 152 writel(0, addr + WIN_BASE_OFF); 153 writel(0, addr + WIN_CTRL_OFF); 154 if (win < mbus->soc->num_remappable_wins) { 155 writel(0, addr + WIN_REMAP_LO_OFF); 156 writel(0, addr + WIN_REMAP_HI_OFF); 157 } 158 } 159 160 /* Checks whether the given window number is available */ 161 static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, 162 const int win) 163 { 164 void __iomem *addr = mbus->mbuswins_base + 165 mbus->soc->win_cfg_offset(win); 166 u32 ctrl = readl(addr + WIN_CTRL_OFF); 167 return !(ctrl & WIN_CTRL_ENABLE); 168 } 169 170 /* 171 * Checks whether the given (base, base+size) area doesn't overlap an 172 * existing region 173 */ 174 static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, 175 phys_addr_t base, size_t size, 176 u8 target, u8 attr) 177 { 178 u64 end = (u64)base + size; 179 int win; 180 181 for (win = 0; win < mbus->soc->num_wins; win++) { 182 u64 wbase, wend; 183 u32 wsize; 184 u8 wtarget, wattr; 185 int enabled; 186 187 mvebu_mbus_read_window(mbus, win, 188 &enabled, &wbase, &wsize, 189 &wtarget, &wattr, NULL); 190 191 if (!enabled) 192 continue; 193 194 wend = wbase + wsize; 195 196 /* 197 * Check if the current window overlaps with the 198 * proposed physical range 199 */ 200 if ((u64)base < wend && end > wbase) 201 return 0; 202 203 /* 204 * Check if target/attribute conflicts 205 */ 206 if (target == wtarget && attr == wattr) 207 return 0; 208 } 209 210 return 1; 211 } 212 213 static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, 214 phys_addr_t base, size_t size) 215 { 216 int win; 217 218 for (win = 0; win < mbus->soc->num_wins; win++) { 219 u64 wbase; 220 u32 wsize; 221 int enabled; 222 223 mvebu_mbus_read_window(mbus, win, 224 &enabled, &wbase, &wsize, 225 NULL, NULL, NULL); 226 227 if (!enabled) 228 continue; 229 230 if (base == wbase && size == wsize) 231 return win; 232 } 233 234 return -ENODEV; 235 } 236 237 static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, 238 int win, phys_addr_t base, size_t size, 239 phys_addr_t remap, u8 target, 240 u8 attr) 241 { 242 void __iomem *addr = mbus->mbuswins_base + 243 mbus->soc->win_cfg_offset(win); 244 u32 ctrl, remap_addr; 245 246 ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | 247 (attr << WIN_CTRL_ATTR_SHIFT) | 248 (target << WIN_CTRL_TGT_SHIFT) | 249 WIN_CTRL_ENABLE; 250 251 writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); 252 writel(ctrl, addr + WIN_CTRL_OFF); 253 if (win < mbus->soc->num_remappable_wins) { 254 if (remap == MVEBU_MBUS_NO_REMAP) 255 remap_addr = base; 256 else 257 remap_addr = remap; 258 writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); 259 writel(0, addr + WIN_REMAP_HI_OFF); 260 } 261 262 return 0; 263 } 264 265 static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, 266 phys_addr_t base, size_t size, 267 phys_addr_t remap, u8 target, 268 u8 attr) 269 { 270 int win; 271 272 if (remap == MVEBU_MBUS_NO_REMAP) { 273 for (win = mbus->soc->num_remappable_wins; 274 win < mbus->soc->num_wins; win++) 275 if (mvebu_mbus_window_is_free(mbus, win)) 276 return mvebu_mbus_setup_window(mbus, win, base, 277 size, remap, 278 target, attr); 279 } 280 281 282 for (win = 0; win < mbus->soc->num_wins; win++) 283 if (mvebu_mbus_window_is_free(mbus, win)) 284 return mvebu_mbus_setup_window(mbus, win, base, size, 285 remap, target, attr); 286 287 return -ENOMEM; 288 } 289 290 /* 291 * SoC-specific functions and definitions 292 */ 293 294 static unsigned int armada_370_xp_mbus_win_offset(int win) 295 { 296 /* The register layout is a bit annoying and the below code 297 * tries to cope with it. 298 * - At offset 0x0, there are the registers for the first 8 299 * windows, with 4 registers of 32 bits per window (ctrl, 300 * base, remap low, remap high) 301 * - Then at offset 0x80, there is a hole of 0x10 bytes for 302 * the internal registers base address and internal units 303 * sync barrier register. 304 * - Then at offset 0x90, there the registers for 12 305 * windows, with only 2 registers of 32 bits per window 306 * (ctrl, base). 307 */ 308 if (win < 8) 309 return win << 4; 310 else 311 return 0x90 + ((win - 8) << 3); 312 } 313 314 static unsigned int orion5x_mbus_win_offset(int win) 315 { 316 return win << 4; 317 } 318 319 static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) 320 { 321 int i; 322 int cs; 323 324 mbus_dram_info.mbus_dram_target_id = TARGET_DDR; 325 326 for (i = 0, cs = 0; i < 4; i++) { 327 u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); 328 u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); 329 330 /* 331 * We only take care of entries for which the chip 332 * select is enabled, and that don't have high base 333 * address bits set (devices can only access the first 334 * 32 bits of the memory). 335 */ 336 if ((size & DDR_SIZE_ENABLED) && 337 !(base & DDR_BASE_CS_HIGH_MASK)) { 338 struct mbus_dram_window *w; 339 340 w = &mbus_dram_info.cs[cs++]; 341 w->cs_index = i; 342 w->mbus_attr = 0xf & ~(1 << i); 343 w->base = base & DDR_BASE_CS_LOW_MASK; 344 w->size = (size | ~DDR_SIZE_MASK) + 1; 345 } 346 } 347 mbus_dram_info.num_cs = cs; 348 } 349 350 static const struct mvebu_mbus_soc_data 351 armada_370_xp_mbus_data __maybe_unused = { 352 .num_wins = 20, 353 .num_remappable_wins = 8, 354 .win_cfg_offset = armada_370_xp_mbus_win_offset, 355 .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, 356 }; 357 358 static const struct mvebu_mbus_soc_data 359 kirkwood_mbus_data __maybe_unused = { 360 .num_wins = 8, 361 .num_remappable_wins = 4, 362 .win_cfg_offset = orion5x_mbus_win_offset, 363 .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, 364 }; 365 366 /* 367 * Public API of the driver 368 */ 369 const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) 370 { 371 return &mbus_dram_info; 372 } 373 374 int mvebu_mbus_add_window_remap_by_id(unsigned int target, 375 unsigned int attribute, 376 phys_addr_t base, size_t size, 377 phys_addr_t remap) 378 { 379 struct mvebu_mbus_state *s = &mbus_state; 380 381 if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { 382 printf("Cannot add window '%x:%x', conflicts with another window\n", 383 target, attribute); 384 return -EINVAL; 385 } 386 387 return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); 388 } 389 390 int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, 391 phys_addr_t base, size_t size) 392 { 393 return mvebu_mbus_add_window_remap_by_id(target, attribute, base, 394 size, MVEBU_MBUS_NO_REMAP); 395 } 396 397 int mvebu_mbus_del_window(phys_addr_t base, size_t size) 398 { 399 int win; 400 401 win = mvebu_mbus_find_window(&mbus_state, base, size); 402 if (win < 0) 403 return win; 404 405 mvebu_mbus_disable_window(&mbus_state, win); 406 return 0; 407 } 408 409 static void mvebu_mbus_get_lowest_base(struct mvebu_mbus_state *mbus, 410 phys_addr_t *base) 411 { 412 int win; 413 *base = 0xffffffff; 414 415 for (win = 0; win < mbus->soc->num_wins; win++) { 416 u64 wbase; 417 u32 wsize; 418 u8 wtarget, wattr; 419 int enabled; 420 421 mvebu_mbus_read_window(mbus, win, 422 &enabled, &wbase, &wsize, 423 &wtarget, &wattr, NULL); 424 425 if (!enabled) 426 continue; 427 428 if (wbase < *base) 429 *base = wbase; 430 } 431 } 432 433 static void mvebu_config_mbus_bridge(struct mvebu_mbus_state *mbus) 434 { 435 phys_addr_t base; 436 u32 val; 437 u32 size; 438 439 /* Set MBUS bridge base/ctrl */ 440 mvebu_mbus_get_lowest_base(&mbus_state, &base); 441 442 size = 0xffffffff - base + 1; 443 if (!is_power_of_2(size)) { 444 /* Round up to next power of 2 */ 445 size = 1 << (ffs(base) + 1); 446 base = 0xffffffff - size + 1; 447 } 448 449 /* Now write base and size */ 450 writel(base, MBUS_BRIDGE_WIN_BASE_REG); 451 /* Align window size to 64KiB */ 452 val = (size / (64 << 10)) - 1; 453 writel((val << 16) | 0x1, MBUS_BRIDGE_WIN_CTRL_REG); 454 } 455 456 int mbus_dt_setup_win(struct mvebu_mbus_state *mbus, 457 u32 base, u32 size, u8 target, u8 attr) 458 { 459 if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { 460 printf("Cannot add window '%04x:%04x', conflicts with another window\n", 461 target, attr); 462 return -EBUSY; 463 } 464 465 /* 466 * In U-Boot we first try to add the mbus window to the remap windows. 467 * If this fails, lets try to add the windows to the non-remap windows. 468 */ 469 if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) { 470 if (mvebu_mbus_alloc_window(mbus, base, size, 471 MVEBU_MBUS_NO_REMAP, target, attr)) 472 return -ENOMEM; 473 } 474 475 /* 476 * Re-configure the mbus bridge registers each time this function 477 * is called. Since it may get called from the board code in 478 * later boot stages as well. 479 */ 480 mvebu_config_mbus_bridge(mbus); 481 482 return 0; 483 } 484 485 int mvebu_mbus_probe(struct mbus_win windows[], int count) 486 { 487 int win; 488 int ret; 489 int i; 490 491 #if defined(CONFIG_KIRKWOOD) 492 mbus_state.soc = &kirkwood_mbus_data; 493 #endif 494 #if defined(CONFIG_ARMADA_XP) 495 mbus_state.soc = &armada_370_xp_mbus_data; 496 #endif 497 498 mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE; 499 mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE; 500 501 for (win = 0; win < mbus_state.soc->num_wins; win++) 502 mvebu_mbus_disable_window(&mbus_state, win); 503 504 mbus_state.soc->setup_cpu_target(&mbus_state); 505 506 /* Setup statically declared windows in the DT */ 507 for (i = 0; i < count; i++) { 508 u32 base, size; 509 u8 target, attr; 510 511 target = windows[i].target; 512 attr = windows[i].attr; 513 base = windows[i].base; 514 size = windows[i].size; 515 ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr); 516 if (ret < 0) 517 return ret; 518 } 519 520 return 0; 521 } 522