1 /*
2  * (C) Copyright 2009
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
5  *
6  * Header file for the Marvell's Feroceon CPU core.
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef _MVEBU_SOC_H
12 #define _MVEBU_SOC_H
13 
14 #define SOC_MV78230_ID		0x7823
15 #define SOC_MV78260_ID		0x7826
16 #define SOC_MV78460_ID		0x7846
17 #define SOC_88F6810_ID		0x6810
18 #define SOC_88F6820_ID		0x6820
19 #define SOC_88F6828_ID		0x6828
20 
21 /* A38x revisions */
22 #define MV_88F68XX_Z1_ID	0x0
23 #define MV_88F68XX_A0_ID	0x4
24 
25 /* TCLK Core Clock definition */
26 #ifndef CONFIG_SYS_TCLK
27 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
28 #endif
29 
30 /* Armada XP PLL frequency (used for NAND clock generation) */
31 #define CONFIG_SYS_MVEBU_PLL_CLOCK	2000000000
32 
33 /* SOC specific definations */
34 #define INTREG_BASE		0xd0000000
35 #define INTREG_BASE_ADDR_REG	(INTREG_BASE + 0x20080)
36 #if defined(CONFIG_SPL_BUILD)
37 /*
38  * The SPL U-Boot version still runs with the default
39  * address for the internal registers, configured by
40  * the BootROM. Only the main U-Boot version uses the
41  * new internal register base address, that also is
42  * required for the Linux kernel.
43  */
44 #define SOC_REGS_PHY_BASE	0xd0000000
45 #else
46 #define SOC_REGS_PHY_BASE	0xf1000000
47 #endif
48 #define MVEBU_REGISTER(x)	(SOC_REGS_PHY_BASE + x)
49 
50 #define MVEBU_SDRAM_SCRATCH	(MVEBU_REGISTER(0x01504))
51 #define MVEBU_L2_CACHE_BASE	(MVEBU_REGISTER(0x08000))
52 #define CONFIG_SYS_PL310_BASE	MVEBU_L2_CACHE_BASE
53 #define MVEBU_TWSI_BASE		(MVEBU_REGISTER(0x11000))
54 #define MVEBU_MPP_BASE		(MVEBU_REGISTER(0x18000))
55 #define MVEBU_GPIO0_BASE	(MVEBU_REGISTER(0x18100))
56 #define MVEBU_GPIO1_BASE	(MVEBU_REGISTER(0x18140))
57 #define MVEBU_GPIO2_BASE	(MVEBU_REGISTER(0x18180))
58 #define MVEBU_SYSTEM_REG_BASE	(MVEBU_REGISTER(0x18200))
59 #define MVEBU_CLOCK_BASE	(MVEBU_REGISTER(0x18700))
60 #define MVEBU_CPU_WIN_BASE	(MVEBU_REGISTER(0x20000))
61 #define MVEBU_SDRAM_BASE	(MVEBU_REGISTER(0x20180))
62 #define MVEBU_TIMER_BASE	(MVEBU_REGISTER(0x20300))
63 #define MVEBU_REG_PCIE_BASE	(MVEBU_REGISTER(0x40000))
64 #define MVEBU_AXP_USB_BASE      (MVEBU_REGISTER(0x50000))
65 #define MVEBU_USB20_BASE	(MVEBU_REGISTER(0x58000))
66 #define MVEBU_AXP_SATA_BASE	(MVEBU_REGISTER(0xa0000))
67 #define MVEBU_SATA0_BASE	(MVEBU_REGISTER(0xa8000))
68 #define MVEBU_NAND_BASE		(MVEBU_REGISTER(0xd0000))
69 #define MVEBU_SDIO_BASE		(MVEBU_REGISTER(0xd8000))
70 #define MVEBU_LCD_BASE		(MVEBU_REGISTER(0xe0000))
71 
72 #define SOC_COHERENCY_FABRIC_CTRL_REG	(MVEBU_REGISTER(0x20200))
73 #define MBUS_ERR_PROP_EN	(1 << 8)
74 
75 #define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
76 #define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
77 
78 #define MVEBU_SOC_DEV_MUX_REG	(MVEBU_SYSTEM_REG_BASE + 0x08)
79 #define NAND_EN			BIT(0)
80 #define NAND_ARBITER_EN		BIT(27)
81 
82 #define ARMADA_XP_PUP_ENABLE	(MVEBU_SYSTEM_REG_BASE + 0x44c)
83 #define GE0_PUP_EN		BIT(0)
84 #define GE1_PUP_EN		BIT(1)
85 #define LCD_PUP_EN		BIT(2)
86 #define NAND_PUP_EN		BIT(4)
87 #define SPI_PUP_EN		BIT(5)
88 
89 #define MVEBU_CORE_DIV_CLK_CTRL(i)	(MVEBU_CLOCK_BASE + ((i) * 0x8))
90 #define NAND_ECC_DIVCKL_RATIO_OFFS	8
91 #define NAND_ECC_DIVCKL_RATIO_MASK	(0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
92 
93 #define SDRAM_MAX_CS		4
94 #define SDRAM_ADDR_MASK		0xFF000000
95 
96 /* MVEBU CPU memory windows */
97 #define MVCPU_WIN_CTRL_DATA	CPU_WIN_CTRL_DATA
98 #define MVCPU_WIN_ENABLE	CPU_WIN_ENABLE
99 #define MVCPU_WIN_DISABLE	CPU_WIN_DISABLE
100 
101 #define COMPHY_REFCLK_ALIGNMENT	(MVEBU_REGISTER(0x182f8))
102 
103 /* BootROM error register (also includes some status infos) */
104 #define CONFIG_BOOTROM_ERR_REG	(MVEBU_REGISTER(0x182d0))
105 #define BOOTROM_ERR_MODE_OFFS	28
106 #define BOOTROM_ERR_MODE_MASK	(0xf << BOOTROM_ERR_MODE_OFFS)
107 #define BOOTROM_ERR_MODE_UART	0x6
108 
109 #if defined(CONFIG_ARMADA_38X)
110 /* SAR values for Armada 38x */
111 #define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18600))
112 
113 #define SAR_CPU_FREQ_OFFS	10
114 #define SAR_CPU_FREQ_MASK	(0x1f << SAR_CPU_FREQ_OFFS)
115 #define SAR_BOOT_DEVICE_OFFS	4
116 #define SAR_BOOT_DEVICE_MASK	(0x1f << SAR_BOOT_DEVICE_OFFS)
117 
118 #define BOOT_DEV_SEL_OFFS	4
119 #define BOOT_DEV_SEL_MASK	(0x3f << BOOT_DEV_SEL_OFFS)
120 
121 #define BOOT_FROM_UART		0x28
122 #define BOOT_FROM_SPI		0x32
123 #define BOOT_FROM_MMC		0x30
124 #define BOOT_FROM_MMC_ALT	0x31
125 #else
126 /* SAR values for Armada XP */
127 #define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18230))
128 #define CONFIG_SAR2_REG		(MVEBU_REGISTER(0x18234))
129 
130 #define SAR_CPU_FREQ_OFFS	21
131 #define SAR_CPU_FREQ_MASK	(0x7 << SAR_CPU_FREQ_OFFS)
132 #define SAR_FFC_FREQ_OFFS	24
133 #define SAR_FFC_FREQ_MASK	(0xf << SAR_FFC_FREQ_OFFS)
134 #define SAR2_CPU_FREQ_OFFS	20
135 #define SAR2_CPU_FREQ_MASK	(0x1 << SAR2_CPU_FREQ_OFFS)
136 #define SAR_BOOT_DEVICE_OFFS	5
137 #define SAR_BOOT_DEVICE_MASK	(0xf << SAR_BOOT_DEVICE_OFFS)
138 
139 #define BOOT_DEV_SEL_OFFS	5
140 #define BOOT_DEV_SEL_MASK	(0xf << BOOT_DEV_SEL_OFFS)
141 
142 #define BOOT_FROM_UART		0x2
143 #define BOOT_FROM_SPI		0x3
144 #endif
145 
146 #endif /* _MVEBU_SOC_H */
147