1 /*
2  * (C) Copyright 2011
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Lei Wen <leiwen@marvell.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 /*
10  * This file should be included in board config header file.
11  *
12  * It supports common definitions for MVEBU platforms
13  */
14 
15 #ifndef _MVEBU_CONFIG_H
16 #define _MVEBU_CONFIG_H
17 
18 #include <asm/arch/soc.h>
19 
20 #if defined(CONFIG_ARMADA_XP)
21 #define MV88F78X60 /* for the DDR training bin_hdr code */
22 #endif
23 
24 #define CONFIG_SYS_CACHELINE_SIZE	32
25 
26 /*
27  * By default kwbimage.cfg from board specific folder is used
28  * If for some board, different configuration file need to be used,
29  * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
30  */
31 #ifndef CONFIG_SYS_KWD_CONFIG
32 #define	CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
33 #endif /* CONFIG_SYS_KWD_CONFIG */
34 
35 /* Add target to build it automatically upon "make" */
36 #ifdef CONFIG_SPL
37 #define CONFIG_BUILD_TARGET	"u-boot-spl.kwb"
38 #endif
39 
40 /* end of 16M scrubbed by training in bootrom */
41 #define CONFIG_SYS_INIT_SP_ADDR		0x00FF0000
42 #define CONFIG_NR_DRAM_BANKS_MAX	2
43 
44 #define MV_UART_CONSOLE_BASE		MVEBU_UART0_BASE
45 
46 /*
47  * SPI Flash configuration
48  */
49 #ifdef CONFIG_CMD_SF
50 #define CONFIG_HARD_SPI			1
51 #define CONFIG_KIRKWOOD_SPI		1
52 #ifndef CONFIG_ENV_SPI_BUS
53 # define CONFIG_ENV_SPI_BUS		0
54 #endif
55 #ifndef CONFIG_ENV_SPI_CS
56 # define CONFIG_ENV_SPI_CS		0
57 #endif
58 #ifndef CONFIG_ENV_SPI_MAX_HZ
59 # define CONFIG_ENV_SPI_MAX_HZ		50000000
60 #endif
61 #endif
62 
63 /*
64  * Ethernet Driver configuration
65  */
66 #ifdef CONFIG_CMD_NET
67 #define CONFIG_CMD_MII
68 #define CONFIG_MII		/* expose smi ove miiphy interface */
69 #define CONFIG_MVNETA		/* Enable Marvell Gbe Controller Driver */
70 #define CONFIG_PHYLIB
71 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
72 #define CONFIG_PHY_GIGE		/* GbE speed/duplex detect */
73 #endif /* CONFIG_CMD_NET */
74 
75 /*
76  * I2C related stuff
77  */
78 #ifdef CONFIG_CMD_I2C
79 #ifndef CONFIG_SYS_I2C_SOFT
80 #define CONFIG_I2C_MVTWSI
81 #endif
82 #define CONFIG_SYS_I2C_SLAVE		0x0
83 #define CONFIG_SYS_I2C_SPEED		100000
84 #endif
85 
86 /* Common SPL configuration */
87 #ifndef CONFIG_SPL_LDSCRIPT
88 #define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-mvebu/u-boot-spl.lds"
89 #endif
90 
91 #endif /* __MVEBU_CONFIG_H */
92