1 /*
2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <dm.h>
9 #include <fdtdec.h>
10 #include <libfdt.h>
11 #include <asm/io.h>
12 #include <asm/system.h>
13 #include <asm/arch/cpu.h>
14 #include <asm/arch/soc.h>
15 #include <asm/armv8/mmu.h>
16 
17 DECLARE_GLOBAL_DATA_PTR;
18 
19 /* Armada 7k/8k */
20 #define MVEBU_RFU_BASE			(MVEBU_REGISTER(0x6f0000))
21 #define RFU_GLOBAL_SW_RST		(MVEBU_RFU_BASE + 0x84)
22 #define RFU_SW_RESET_OFFSET		0
23 
24 /*
25  * The following table includes all memory regions for Armada 7k and
26  * 8k SoCs. The Armada 7k is missing the CP110 slave regions here. Lets
27  * define these regions at the beginning of the struct so that they
28  * can be easier removed later dynamically if an Armada 7k device is detected.
29  * For a detailed memory map, please see doc/mvebu/armada-8k-memory.txt
30  */
31 #define ARMADA_7K8K_COMMON_REGIONS_START	2
32 static struct mm_region mvebu_mem_map[] = {
33 	/* Armada 80x0 memory regions include the CP1 (slave) units */
34 	{
35 		/* SRAM, MMIO regions - CP110 slave region */
36 		.phys = 0xf4000000UL,
37 		.virt = 0xf4000000UL,
38 		.size = 0x02000000UL,	/* 32MiB internal registers */
39 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
40 			 PTE_BLOCK_NON_SHARE
41 	},
42 	{
43 		/* PCI CP1 regions */
44 		.phys = 0xfa000000UL,
45 		.virt = 0xfa000000UL,
46 		.size = 0x04000000UL,	/* 64MiB CP110 slave PCI space */
47 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
48 			 PTE_BLOCK_NON_SHARE
49 	},
50 	/* Armada 80x0 and 70x0 common memory regions start here */
51 	{
52 		/* RAM */
53 		.phys = 0x0UL,
54 		.virt = 0x0UL,
55 		.size = 0x80000000UL,
56 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
57 			 PTE_BLOCK_INNER_SHARE
58 	},
59 	{
60 		/* SRAM, MMIO regions - AP806 region */
61 		.phys = 0xf0000000UL,
62 		.virt = 0xf0000000UL,
63 		.size = 0x01000000UL,	/* 16MiB internal registers */
64 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
65 			 PTE_BLOCK_NON_SHARE
66 	},
67 	{
68 		/* SRAM, MMIO regions - CP110 master region */
69 		.phys = 0xf2000000UL,
70 		.virt = 0xf2000000UL,
71 		.size = 0x02000000UL,	/* 32MiB internal registers */
72 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
73 			 PTE_BLOCK_NON_SHARE
74 	},
75 	{
76 		/* PCI CP0 regions */
77 		.phys = 0xf6000000UL,
78 		.virt = 0xf6000000UL,
79 		.size = 0x04000000UL,	/* 64MiB CP110 master PCI space */
80 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
81 			 PTE_BLOCK_NON_SHARE
82 	},
83 	{
84 		0,
85 	}
86 };
87 
88 struct mm_region *mem_map = mvebu_mem_map;
89 
90 void enable_caches(void)
91 {
92 	/*
93 	 * Armada 7k is not equipped with the CP110 slave CP. In case this
94 	 * code runs on an Armada 7k device, lets remove the CP110 slave
95 	 * entries from the memory mapping by moving the start to the
96 	 * common regions.
97 	 */
98 	if (of_machine_is_compatible("marvell,armada7040"))
99 		mem_map = &mvebu_mem_map[ARMADA_7K8K_COMMON_REGIONS_START];
100 
101 	icache_enable();
102 	dcache_enable();
103 }
104 
105 void reset_cpu(ulong ignored)
106 {
107 	u32 reg;
108 
109 	reg = readl(RFU_GLOBAL_SW_RST);
110 	reg &= ~(1 << RFU_SW_RESET_OFFSET);
111 	writel(reg, RFU_GLOBAL_SW_RST);
112 }
113