1 /* 2 * Keystone2: DDR3 initialization 3 * 4 * (C) Copyright 2012-2014 5 * Texas Instruments Incorporated, <www.ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <asm/io.h> 11 #include <common.h> 12 #include <asm/arch/msmc.h> 13 #include <asm/arch/ddr3.h> 14 #include <asm/arch/psc_defs.h> 15 16 #include <asm/ti-common/ti-edma3.h> 17 18 #define DDR3_EDMA_BLK_SIZE_SHIFT 10 19 #define DDR3_EDMA_BLK_SIZE (1 << DDR3_EDMA_BLK_SIZE_SHIFT) 20 #define DDR3_EDMA_BCNT 0x8000 21 #define DDR3_EDMA_CCNT 1 22 #define DDR3_EDMA_XF_SIZE (DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT) 23 #define DDR3_EDMA_SLOT_NUM 1 24 25 void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) 26 { 27 unsigned int tmp; 28 29 while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) 30 & 0x00000001) != 0x00000001) 31 ; 32 33 __raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET); 34 35 tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET); 36 tmp &= ~(phy_cfg->pgcr1_mask); 37 tmp |= phy_cfg->pgcr1_val; 38 __raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET); 39 40 __raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET); 41 __raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET); 42 __raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET); 43 __raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET); 44 45 tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET); 46 tmp &= ~(phy_cfg->dcr_mask); 47 tmp |= phy_cfg->dcr_val; 48 __raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET); 49 50 __raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET); 51 __raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET); 52 __raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET); 53 __raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET); 54 __raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET); 55 __raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET); 56 __raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET); 57 __raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET); 58 59 __raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET); 60 __raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET); 61 __raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET); 62 63 __raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET); 64 while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1) 65 ; 66 67 if (cpu_is_k2g()) { 68 clrsetbits_le32(base + KS2_DDRPHY_DATX8_2_OFFSET, 69 phy_cfg->datx8_2_mask, 70 phy_cfg->datx8_2_val); 71 72 clrsetbits_le32(base + KS2_DDRPHY_DATX8_3_OFFSET, 73 phy_cfg->datx8_3_mask, 74 phy_cfg->datx8_3_val); 75 76 clrsetbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET, 77 phy_cfg->datx8_4_mask, 78 phy_cfg->datx8_4_val); 79 80 clrsetbits_le32(base + KS2_DDRPHY_DATX8_5_OFFSET, 81 phy_cfg->datx8_5_mask, 82 phy_cfg->datx8_5_val); 83 84 clrsetbits_le32(base + KS2_DDRPHY_DATX8_6_OFFSET, 85 phy_cfg->datx8_6_mask, 86 phy_cfg->datx8_6_val); 87 88 clrsetbits_le32(base + KS2_DDRPHY_DATX8_7_OFFSET, 89 phy_cfg->datx8_7_mask, 90 phy_cfg->datx8_7_val); 91 92 clrsetbits_le32(base + KS2_DDRPHY_DATX8_8_OFFSET, 93 phy_cfg->datx8_8_mask, 94 phy_cfg->datx8_8_val); 95 } 96 97 __raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET); 98 while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1) 99 ; 100 } 101 102 void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) 103 { 104 __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET); 105 __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET); 106 __raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET); 107 __raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET); 108 __raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET); 109 __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET); 110 __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET); 111 } 112 113 int ddr3_ecc_support_rmw(u32 base) 114 { 115 u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET); 116 117 /* Check the DDR3 controller ID reg if the controllers 118 supports ECC RMW or not */ 119 if (value == 0x40461C02) 120 return 1; 121 122 return 0; 123 } 124 125 static void ddr3_ecc_config(u32 base, u32 value) 126 { 127 u32 data; 128 129 __raw_writel(value, base + KS2_DDR3_ECC_CTRL_OFFSET); 130 udelay(100000); /* delay required to synchronize across clock domains */ 131 132 if (value & KS2_DDR3_ECC_EN) { 133 /* Clear the 1-bit error count */ 134 data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); 135 __raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); 136 137 /* enable the ECC interrupt */ 138 __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS | 139 KS2_DDR3_WR_ECC_ERR_SYS, 140 base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET); 141 142 /* Clear the ECC error interrupt status */ 143 __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS | 144 KS2_DDR3_WR_ECC_ERR_SYS, 145 base + KS2_DDR3_ECC_INT_STATUS_OFFSET); 146 } 147 } 148 149 static void ddr3_reset_data(u32 base, u32 ddr3_size) 150 { 151 u32 mpax[2]; 152 u32 seg_num; 153 u32 seg, blks, dst, edma_blks; 154 struct edma3_slot_config slot; 155 struct edma3_channel_config edma_channel; 156 u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, }; 157 158 /* Setup an edma to copy the 1k block to the entire DDR */ 159 puts("\nClear entire DDR3 memory to enable ECC\n"); 160 161 /* save the SES MPAX regs */ 162 if (cpu_is_k2g()) 163 msmc_get_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax); 164 else 165 msmc_get_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax); 166 167 /* setup edma slot 1 configuration */ 168 slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB | 169 EDMA3_SLOPT_COMP_CODE(0) | 170 EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC; 171 slot.bcnt = DDR3_EDMA_BCNT; 172 slot.acnt = DDR3_EDMA_BLK_SIZE; 173 slot.ccnt = DDR3_EDMA_CCNT; 174 slot.src_bidx = 0; 175 slot.dst_bidx = DDR3_EDMA_BLK_SIZE; 176 slot.src_cidx = 0; 177 slot.dst_cidx = 0; 178 slot.link = EDMA3_PARSET_NULL_LINK; 179 slot.bcntrld = 0; 180 edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot); 181 182 /* configure quik edma channel */ 183 edma_channel.slot = DDR3_EDMA_SLOT_NUM; 184 edma_channel.chnum = 0; 185 edma_channel.complete_code = 0; 186 /* event trigger after dst update */ 187 edma_channel.trigger_slot_word = EDMA3_TWORD(dst); 188 qedma3_start(KS2_EDMA0_BASE, &edma_channel); 189 190 /* DDR3 size in segments (4KB seg size) */ 191 seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT); 192 193 for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) { 194 /* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF 195 access slave interface so that edma driver can access */ 196 if (cpu_is_k2g()) { 197 msmc_map_ses_segment(K2G_MSMC_SEGMENT_ARM, 0, 198 base >> KS2_MSMC_SEG_SIZE_SHIFT, 199 KS2_MSMC_DST_SEG_BASE + seg, 200 MPAX_SEG_2G); 201 } else { 202 msmc_map_ses_segment(K2HKLE_MSMC_SEGMENT_ARM, 0, 203 base >> KS2_MSMC_SEG_SIZE_SHIFT, 204 KS2_MSMC_DST_SEG_BASE + seg, 205 MPAX_SEG_2G); 206 } 207 208 if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM) 209 edma_blks = KS2_MSMC_MAP_SEG_NUM << 210 (KS2_MSMC_SEG_SIZE_SHIFT 211 - DDR3_EDMA_BLK_SIZE_SHIFT); 212 else 213 edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT 214 - DDR3_EDMA_BLK_SIZE_SHIFT); 215 216 /* Use edma driver to scrub 2GB DDR memory */ 217 for (dst = base, blks = 0; blks < edma_blks; 218 blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) { 219 edma3_set_src_addr(KS2_EDMA0_BASE, 220 edma_channel.slot, (u32)edma_src); 221 edma3_set_dest_addr(KS2_EDMA0_BASE, 222 edma_channel.slot, (u32)dst); 223 224 while (edma3_check_for_transfer(KS2_EDMA0_BASE, 225 &edma_channel)) 226 udelay(10); 227 } 228 } 229 230 qedma3_stop(KS2_EDMA0_BASE, &edma_channel); 231 232 /* restore the SES MPAX regs */ 233 if (cpu_is_k2g()) 234 msmc_set_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax); 235 else 236 msmc_set_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax); 237 } 238 239 static void ddr3_ecc_init_range(u32 base) 240 { 241 u32 ecc_val = KS2_DDR3_ECC_EN; 242 u32 rmw = ddr3_ecc_support_rmw(base); 243 244 if (rmw) 245 ecc_val |= KS2_DDR3_ECC_RMW_EN; 246 247 __raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET); 248 249 ddr3_ecc_config(base, ecc_val); 250 } 251 252 void ddr3_enable_ecc(u32 base, int test) 253 { 254 u32 ecc_val = KS2_DDR3_ECC_ENABLE; 255 u32 rmw = ddr3_ecc_support_rmw(base); 256 257 if (test) 258 ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN; 259 260 if (!rmw) { 261 if (!test) 262 /* by default, disable ecc when rmw = 0 and no 263 ecc test */ 264 ecc_val = 0; 265 } else { 266 ecc_val |= KS2_DDR3_ECC_RMW_EN; 267 } 268 269 ddr3_ecc_config(base, ecc_val); 270 } 271 272 void ddr3_disable_ecc(u32 base) 273 { 274 ddr3_ecc_config(base, 0); 275 } 276 277 #if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L) 278 static void cic_init(u32 base) 279 { 280 /* Disable CIC global interrupts */ 281 __raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE); 282 283 /* Set to normal mode, no nesting, no priority hold */ 284 __raw_writel(0, base + KS2_CIC_CTRL); 285 __raw_writel(0, base + KS2_CIC_HOST_CTRL); 286 287 /* Enable CIC global interrupts */ 288 __raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE); 289 } 290 291 static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num) 292 { 293 /* Map the system interrupt to a CIC channel */ 294 __raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num); 295 296 /* Enable CIC system interrupt */ 297 __raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET); 298 299 /* Enable CIC Host interrupt */ 300 __raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET); 301 } 302 303 static void ddr3_map_ecc_cic2_irq(u32 base) 304 { 305 cic_init(base); 306 cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM, 307 KS2_CIC2_DDR3_ECC_IRQ_NUM); 308 } 309 #endif 310 311 void ddr3_init_ecc(u32 base, u32 ddr3_size) 312 { 313 if (!ddr3_ecc_support_rmw(base)) { 314 ddr3_disable_ecc(base); 315 return; 316 } 317 318 ddr3_ecc_init_range(base); 319 ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size); 320 321 /* mapping DDR3 ECC system interrupt from CIC2 to GIC */ 322 #if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L) 323 ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE); 324 #endif 325 ddr3_enable_ecc(base, 0); 326 } 327 328 void ddr3_check_ecc_int(u32 base) 329 { 330 char *env; 331 int ecc_test = 0; 332 u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET); 333 334 env = getenv("ecc_test"); 335 if (env) 336 ecc_test = simple_strtol(env, NULL, 0); 337 338 if (value & KS2_DDR3_WR_ECC_ERR_SYS) 339 puts("DDR3 ECC write error interrupted\n"); 340 341 if (value & KS2_DDR3_2B_ECC_ERR_SYS) { 342 puts("DDR3 ECC 2-bit error interrupted\n"); 343 344 if (!ecc_test) { 345 puts("Reseting the device ...\n"); 346 reset_cpu(0); 347 } 348 } 349 350 value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); 351 if (value) { 352 printf("1-bit ECC err count: 0x%x\n", value); 353 value = __raw_readl(base + 354 KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET); 355 printf("1-bit ECC err address log: 0x%x\n", value); 356 } 357 } 358 359 void ddr3_reset_ddrphy(void) 360 { 361 u32 tmp; 362 363 /* Assert DDR3A PHY reset */ 364 tmp = readl(KS2_DDR3APLLCTL1); 365 tmp |= KS2_DDR3_PLLCTRL_PHY_RESET; 366 writel(tmp, KS2_DDR3APLLCTL1); 367 368 /* wait 10us to catch the reset */ 369 udelay(10); 370 371 /* Release DDR3A PHY reset */ 372 tmp = readl(KS2_DDR3APLLCTL1); 373 tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET; 374 __raw_writel(tmp, KS2_DDR3APLLCTL1); 375 } 376 377 #ifdef CONFIG_SOC_K2HK 378 /** 379 * ddr3_reset_workaround - reset workaround in case if leveling error 380 * detected for PG 1.0 and 1.1 k2hk SoCs 381 */ 382 void ddr3_err_reset_workaround(void) 383 { 384 unsigned int tmp; 385 unsigned int tmp_a; 386 unsigned int tmp_b; 387 388 /* 389 * Check for PGSR0 error bits of DDR3 PHY. 390 * Check for WLERR, QSGERR, WLAERR, 391 * RDERR, WDERR, REERR, WEERR error to see if they are set or not 392 */ 393 tmp_a = __raw_readl(KS2_DDR3A_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET); 394 tmp_b = __raw_readl(KS2_DDR3B_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET); 395 396 if (((tmp_a & 0x0FE00000) != 0) || ((tmp_b & 0x0FE00000) != 0)) { 397 printf("DDR Leveling Error Detected!\n"); 398 printf("DDR3A PGSR0 = 0x%x\n", tmp_a); 399 printf("DDR3B PGSR0 = 0x%x\n", tmp_b); 400 401 /* 402 * Write Keys to KICK registers to enable writes to registers 403 * in boot config space 404 */ 405 __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0); 406 __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1); 407 408 /* 409 * Move DDR3A Module out of reset isolation by setting 410 * MDCTL23[12] = 0 411 */ 412 tmp_a = __raw_readl(KS2_PSC_BASE + 413 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A)); 414 415 tmp_a = PSC_REG_MDCTL_SET_RESET_ISO(tmp_a, 0); 416 __raw_writel(tmp_a, KS2_PSC_BASE + 417 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A)); 418 419 /* 420 * Move DDR3B Module out of reset isolation by setting 421 * MDCTL24[12] = 0 422 */ 423 tmp_b = __raw_readl(KS2_PSC_BASE + 424 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B)); 425 tmp_b = PSC_REG_MDCTL_SET_RESET_ISO(tmp_b, 0); 426 __raw_writel(tmp_b, KS2_PSC_BASE + 427 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B)); 428 429 /* 430 * Write 0x5A69 Key to RSTCTRL[15:0] to unlock writes 431 * to RSTCTRL and RSTCFG 432 */ 433 tmp = __raw_readl(KS2_RSTCTRL); 434 tmp &= KS2_RSTCTRL_MASK; 435 tmp |= KS2_RSTCTRL_KEY; 436 __raw_writel(tmp, KS2_RSTCTRL); 437 438 /* 439 * Set PLL Controller to drive hard reset on SW trigger by 440 * setting RSTCFG[13] = 0 441 */ 442 tmp = __raw_readl(KS2_RSTCTRL_RSCFG); 443 tmp &= ~KS2_RSTYPE_PLL_SOFT; 444 __raw_writel(tmp, KS2_RSTCTRL_RSCFG); 445 446 reset_cpu(0); 447 } 448 } 449 #endif 450