xref: /openbmc/u-boot/arch/arm/mach-imx/timer.c (revision 7c75f7f1)
1 /*
2  * (C) Copyright 2007
3  * Sascha Hauer, Pengutronix
4  *
5  * (C) Copyright 2009 Freescale Semiconductor, Inc.
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <asm/io.h>
12 #include <div64.h>
13 #include <asm/arch/imx-regs.h>
14 #include <asm/arch/clock.h>
15 #include <asm/arch/sys_proto.h>
16 
17 /* General purpose timers registers */
18 struct mxc_gpt {
19 	unsigned int control;
20 	unsigned int prescaler;
21 	unsigned int status;
22 	unsigned int nouse[6];
23 	unsigned int counter;
24 };
25 
26 static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
27 
28 /* General purpose timers bitfields */
29 #define GPTCR_SWR		(1 << 15)	/* Software reset */
30 #define GPTCR_24MEN	    (1 << 10)	/* Enable 24MHz clock input */
31 #define GPTCR_FRR		(1 << 9)	/* Freerun / restart */
32 #define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source 32khz */
33 #define GPTCR_CLKSOURCE_OSC	(5 << 6)	/* Clock source OSC */
34 #define GPTCR_CLKSOURCE_PRE	(1 << 6)	/* Clock source PRECLK */
35 #define GPTCR_CLKSOURCE_MASK (0x7 << 6)
36 #define GPTCR_TEN		1		/* Timer enable */
37 
38 #define GPTPR_PRESCALER24M_SHIFT 12
39 #define GPTPR_PRESCALER24M_MASK (0xF << GPTPR_PRESCALER24M_SHIFT)
40 
41 DECLARE_GLOBAL_DATA_PTR;
42 
43 static inline int gpt_has_clk_source_osc(void)
44 {
45 #if defined(CONFIG_MX6)
46 	if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
47 	    is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
48 	    is_mx6ull() || is_mx6sll())
49 		return 1;
50 
51 	return 0;
52 #else
53 	return 0;
54 #endif
55 }
56 
57 static inline ulong gpt_get_clk(void)
58 {
59 #ifdef CONFIG_MXC_GPT_HCLK
60 	if (gpt_has_clk_source_osc())
61 		return MXC_HCLK >> 3;
62 	else
63 		return mxc_get_clock(MXC_IPG_PERCLK);
64 #else
65 	return MXC_CLK32;
66 #endif
67 }
68 
69 int timer_init(void)
70 {
71 	int i;
72 
73 	/* setup GP Timer 1 */
74 	__raw_writel(GPTCR_SWR, &cur_gpt->control);
75 
76 	/* We have no udelay by now */
77 	__raw_writel(0, &cur_gpt->control);
78 
79 	i = __raw_readl(&cur_gpt->control);
80 	i &= ~GPTCR_CLKSOURCE_MASK;
81 
82 #ifdef CONFIG_MXC_GPT_HCLK
83 	if (gpt_has_clk_source_osc()) {
84 		i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
85 
86 		/*
87 		 * For DL/S, SX, UL, ULL, SLL set 24Mhz OSC
88 		 * Enable bit and prescaler
89 		 */
90 		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() ||
91 		    is_mx6sll()) {
92 			i |= GPTCR_24MEN;
93 
94 			/* Produce 3Mhz clock */
95 			__raw_writel((7 << GPTPR_PRESCALER24M_SHIFT),
96 				     &cur_gpt->prescaler);
97 		}
98 	} else {
99 		i |= GPTCR_CLKSOURCE_PRE | GPTCR_TEN;
100 	}
101 #else
102 	__raw_writel(0, &cur_gpt->prescaler); /* 32Khz */
103 	i |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
104 #endif
105 	__raw_writel(i, &cur_gpt->control);
106 
107 	return 0;
108 }
109 
110 unsigned long timer_read_counter(void)
111 {
112 	return __raw_readl(&cur_gpt->counter); /* current tick value */
113 }
114 
115 /*
116  * This function is derived from PowerPC code (timebase clock frequency).
117  * On ARM it returns the number of timer ticks per second.
118  */
119 ulong get_tbclk(void)
120 {
121 	return gpt_get_clk();
122 }
123 
124 /*
125  * This function is intended for SHORT delays only.
126  * It will overflow at around 10 seconds @ 400MHz,
127  * or 20 seconds @ 200MHz.
128  */
129 unsigned long usec2ticks(unsigned long _usec)
130 {
131 	unsigned long long usec = _usec;
132 
133 	usec *= get_tbclk();
134 	usec += 999999;
135 	do_div(usec, 1000000);
136 
137 	return usec;
138 }
139