xref: /openbmc/u-boot/arch/arm/mach-davinci/lxt972.c (revision 85231c08)
1 /*
2  * Intel LXT971/LXT972 PHY Driver for TI DaVinci
3  * (TMS320DM644x) based boards.
4  *
5  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
6  *
7  * --------------------------------------------------------
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #include <common.h>
13 #include <net.h>
14 #include <miiphy.h>
15 #include <lxt971a.h>
16 #include <asm/arch/emac_defs.h>
17 #include "../../../drivers/net/davinci_emac.h"
18 
19 #ifdef CONFIG_DRIVER_TI_EMAC
20 
21 #ifdef CONFIG_CMD_NET
22 
23 int lxt972_is_phy_connected(int phy_addr)
24 {
25 	u_int16_t id1, id2;
26 
27 	if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1))
28 		return(0);
29 	if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2))
30 		return(0);
31 
32 	if ((id1 == (0x0013)) && ((id2  & 0xfff0) == 0x78e0))
33 		return(1);
34 
35 	return(0);
36 }
37 
38 int lxt972_get_link_speed(int phy_addr)
39 {
40 	u_int16_t stat1, tmp;
41 	volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
42 
43 	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
44 		return(0);
45 
46 	if (!(stat1 & PHY_LXT971_STAT2_LINK))	/* link up? */
47 		return(0);
48 
49 	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
50 		return(0);
51 
52 	tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
53 
54 	davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
55 	/* Read back */
56 	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
57 		return(0);
58 
59 	/* Speed doesn't matter, there is no setting for it in EMAC... */
60 	if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
61 		/* set DM644x EMAC for Full Duplex  */
62 		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
63 			EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
64 	} else {
65 		/*set DM644x EMAC for Half Duplex  */
66 		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
67 	}
68 
69 	return(1);
70 }
71 
72 
73 int lxt972_init_phy(int phy_addr)
74 {
75 	int ret = 1;
76 
77 	if (!lxt972_get_link_speed(phy_addr)) {
78 		/* Try another time */
79 		ret = lxt972_get_link_speed(phy_addr);
80 	}
81 
82 	/* Disable PHY Interrupts */
83 	davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
84 
85 	return(ret);
86 }
87 
88 
89 int lxt972_auto_negotiate(int phy_addr)
90 {
91 	u_int16_t tmp;
92 
93 	if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
94 		return(0);
95 
96 	/* Restart Auto_negotiation  */
97 	tmp |= BMCR_ANRESTART;
98 	davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
99 
100 	/*check AutoNegotiate complete */
101 	udelay (10000);
102 	if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
103 		return(0);
104 
105 	if (!(tmp & BMSR_ANEGCOMPLETE))
106 		return(0);
107 
108 	return (lxt972_get_link_speed(phy_addr));
109 }
110 
111 #endif	/* CONFIG_CMD_NET */
112 
113 #endif	/* CONFIG_DRIVER_ETHER */
114