1 /* 2 * (C) Copyright 2012,2015 Stephen Warren 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _BCM2835_MBOX_H 8 #define _BCM2835_MBOX_H 9 10 #include <linux/compiler.h> 11 12 /* 13 * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU") 14 * and the ARM CPU. The ARM CPU is often thought of as the main CPU. 15 * However, the VideoCore actually controls the initial SoC boot, and hides 16 * much of the hardware behind a protocol. This protocol is transported 17 * using the SoC's mailbox hardware module. 18 * 19 * The mailbox hardware supports passing 32-bit values back and forth. 20 * Presumably by software convention of the firmware, the bottom 4 bits of the 21 * value are used to indicate a logical channel, and the upper 28 bits are the 22 * actual payload. Various channels exist using these simple raw messages. See 23 * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an 24 * example, the messages on the power management channel are a bitmask of 25 * devices whose power should be enabled. 26 * 27 * The property mailbox channel passes messages that contain the (16-byte 28 * aligned) ARM physical address of a memory buffer. This buffer is passed to 29 * the VC for processing, is modified in-place by the VC, and the address then 30 * passed back to the ARM CPU as the response mailbox message to indicate 31 * request completion. The buffers have a generic and extensible format; each 32 * buffer contains a standard header, a list of "tags", and a terminating zero 33 * entry. Each tag contains an ID indicating its type, and length fields for 34 * generic parsing. With some limitations, an arbitrary set of tags may be 35 * combined together into a single message buffer. This file defines structs 36 * representing the header and many individual tag layouts and IDs. 37 */ 38 39 /* Raw mailbox HW */ 40 41 #ifndef CONFIG_BCM2835 42 #define BCM2835_MBOX_PHYSADDR 0x3f00b880 43 #else 44 #define BCM2835_MBOX_PHYSADDR 0x2000b880 45 #endif 46 47 struct bcm2835_mbox_regs { 48 u32 read; 49 u32 rsvd0[5]; 50 u32 status; 51 u32 config; 52 u32 write; 53 }; 54 55 #define BCM2835_MBOX_STATUS_WR_FULL 0x80000000 56 #define BCM2835_MBOX_STATUS_RD_EMPTY 0x40000000 57 58 /* Lower 4-bits are channel ID */ 59 #define BCM2835_CHAN_MASK 0xf 60 #define BCM2835_MBOX_PACK(chan, data) (((data) & (~BCM2835_CHAN_MASK)) | \ 61 (chan & BCM2835_CHAN_MASK)) 62 #define BCM2835_MBOX_UNPACK_CHAN(val) ((val) & BCM2835_CHAN_MASK) 63 #define BCM2835_MBOX_UNPACK_DATA(val) ((val) & (~BCM2835_CHAN_MASK)) 64 65 /* Property mailbox buffer structures */ 66 67 #define BCM2835_MBOX_PROP_CHAN 8 68 69 /* All message buffers must start with this header */ 70 struct bcm2835_mbox_hdr { 71 u32 buf_size; 72 u32 code; 73 }; 74 75 #define BCM2835_MBOX_REQ_CODE 0 76 #define BCM2835_MBOX_RESP_CODE_SUCCESS 0x80000000 77 78 #define BCM2835_MBOX_INIT_HDR(_m_) { \ 79 memset((_m_), 0, sizeof(*(_m_))); \ 80 (_m_)->hdr.buf_size = sizeof(*(_m_)); \ 81 (_m_)->hdr.code = 0; \ 82 (_m_)->end_tag = 0; \ 83 } 84 85 /* 86 * A message buffer contains a list of tags. Each tag must also start with 87 * a standardized header. 88 */ 89 struct bcm2835_mbox_tag_hdr { 90 u32 tag; 91 u32 val_buf_size; 92 u32 val_len; 93 }; 94 95 #define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \ 96 (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \ 97 (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \ 98 (_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \ 99 } 100 101 #define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \ 102 (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \ 103 (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \ 104 (_t_)->tag_hdr.val_len = 0; \ 105 } 106 107 /* When responding, the VC sets this bit in val_len to indicate a response */ 108 #define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE 0x80000000 109 110 /* 111 * Below we define the ID and struct for many possible tags. This header only 112 * defines individual tag structs, not entire message structs, since in 113 * general an arbitrary set of tags may be combined into a single message. 114 * Clients of the mbox API are expected to define their own overall message 115 * structures by combining the header, a set of tags, and a terminating 116 * entry. For example, 117 * 118 * struct msg { 119 * struct bcm2835_mbox_hdr hdr; 120 * struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; 121 * ... perhaps other tags here ... 122 * u32 end_tag; 123 * }; 124 */ 125 126 #define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002 127 128 struct bcm2835_mbox_tag_get_board_rev { 129 struct bcm2835_mbox_tag_hdr tag_hdr; 130 union { 131 struct { 132 } req; 133 struct { 134 u32 rev; 135 } resp; 136 } body; 137 }; 138 139 #define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003 140 141 struct bcm2835_mbox_tag_get_mac_address { 142 struct bcm2835_mbox_tag_hdr tag_hdr; 143 union { 144 struct { 145 } req; 146 struct { 147 u8 mac[6]; 148 u8 pad[2]; 149 } resp; 150 } body; 151 }; 152 153 #define BCM2835_MBOX_TAG_GET_BOARD_SERIAL 0x00010004 154 155 struct bcm2835_mbox_tag_get_board_serial { 156 struct bcm2835_mbox_tag_hdr tag_hdr; 157 union { 158 struct __packed { 159 u64 serial; 160 } resp; 161 } body; 162 }; 163 164 #define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005 165 166 struct bcm2835_mbox_tag_get_arm_mem { 167 struct bcm2835_mbox_tag_hdr tag_hdr; 168 union { 169 struct { 170 } req; 171 struct { 172 u32 mem_base; 173 u32 mem_size; 174 } resp; 175 } body; 176 }; 177 178 #define BCM2835_MBOX_POWER_DEVID_SDHCI 0 179 #define BCM2835_MBOX_POWER_DEVID_UART0 1 180 #define BCM2835_MBOX_POWER_DEVID_UART1 2 181 #define BCM2835_MBOX_POWER_DEVID_USB_HCD 3 182 #define BCM2835_MBOX_POWER_DEVID_I2C0 4 183 #define BCM2835_MBOX_POWER_DEVID_I2C1 5 184 #define BCM2835_MBOX_POWER_DEVID_I2C2 6 185 #define BCM2835_MBOX_POWER_DEVID_SPI 7 186 #define BCM2835_MBOX_POWER_DEVID_CCP2TX 8 187 188 #define BCM2835_MBOX_POWER_STATE_RESP_ON (1 << 0) 189 /* Device doesn't exist */ 190 #define BCM2835_MBOX_POWER_STATE_RESP_NODEV (1 << 1) 191 192 #define BCM2835_MBOX_TAG_GET_POWER_STATE 0x00020001 193 194 struct bcm2835_mbox_tag_get_power_state { 195 struct bcm2835_mbox_tag_hdr tag_hdr; 196 union { 197 struct { 198 u32 device_id; 199 } req; 200 struct { 201 u32 device_id; 202 u32 state; 203 } resp; 204 } body; 205 }; 206 207 #define BCM2835_MBOX_TAG_SET_POWER_STATE 0x00028001 208 209 #define BCM2835_MBOX_SET_POWER_STATE_REQ_ON (1 << 0) 210 #define BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT (1 << 1) 211 212 struct bcm2835_mbox_tag_set_power_state { 213 struct bcm2835_mbox_tag_hdr tag_hdr; 214 union { 215 struct { 216 u32 device_id; 217 u32 state; 218 } req; 219 struct { 220 u32 device_id; 221 u32 state; 222 } resp; 223 } body; 224 }; 225 226 #define BCM2835_MBOX_TAG_GET_CLOCK_RATE 0x00030002 227 228 #define BCM2835_MBOX_CLOCK_ID_EMMC 1 229 #define BCM2835_MBOX_CLOCK_ID_UART 2 230 #define BCM2835_MBOX_CLOCK_ID_ARM 3 231 #define BCM2835_MBOX_CLOCK_ID_CORE 4 232 #define BCM2835_MBOX_CLOCK_ID_V3D 5 233 #define BCM2835_MBOX_CLOCK_ID_H264 6 234 #define BCM2835_MBOX_CLOCK_ID_ISP 7 235 #define BCM2835_MBOX_CLOCK_ID_SDRAM 8 236 #define BCM2835_MBOX_CLOCK_ID_PIXEL 9 237 #define BCM2835_MBOX_CLOCK_ID_PWM 10 238 239 struct bcm2835_mbox_tag_get_clock_rate { 240 struct bcm2835_mbox_tag_hdr tag_hdr; 241 union { 242 struct { 243 u32 clock_id; 244 } req; 245 struct { 246 u32 clock_id; 247 u32 rate_hz; 248 } resp; 249 } body; 250 }; 251 252 #define BCM2835_MBOX_TAG_ALLOCATE_BUFFER 0x00040001 253 254 struct bcm2835_mbox_tag_allocate_buffer { 255 struct bcm2835_mbox_tag_hdr tag_hdr; 256 union { 257 struct { 258 u32 alignment; 259 } req; 260 struct { 261 u32 fb_address; 262 u32 fb_size; 263 } resp; 264 } body; 265 }; 266 267 #define BCM2835_MBOX_TAG_RELEASE_BUFFER 0x00048001 268 269 struct bcm2835_mbox_tag_release_buffer { 270 struct bcm2835_mbox_tag_hdr tag_hdr; 271 union { 272 struct { 273 } req; 274 struct { 275 } resp; 276 } body; 277 }; 278 279 #define BCM2835_MBOX_TAG_BLANK_SCREEN 0x00040002 280 281 struct bcm2835_mbox_tag_blank_screen { 282 struct bcm2835_mbox_tag_hdr tag_hdr; 283 union { 284 struct { 285 /* bit 0 means on, other bots reserved */ 286 u32 state; 287 } req; 288 struct { 289 u32 state; 290 } resp; 291 } body; 292 }; 293 294 /* Physical means output signal */ 295 #define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H 0x00040003 296 #define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H 0x00044003 297 #define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H 0x00048003 298 299 struct bcm2835_mbox_tag_physical_w_h { 300 struct bcm2835_mbox_tag_hdr tag_hdr; 301 union { 302 /* req not used for get */ 303 struct { 304 u32 width; 305 u32 height; 306 } req; 307 struct { 308 u32 width; 309 u32 height; 310 } resp; 311 } body; 312 }; 313 314 /* Virtual means display buffer */ 315 #define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H 0x00040004 316 #define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H 0x00044004 317 #define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H 0x00048004 318 319 struct bcm2835_mbox_tag_virtual_w_h { 320 struct bcm2835_mbox_tag_hdr tag_hdr; 321 union { 322 /* req not used for get */ 323 struct { 324 u32 width; 325 u32 height; 326 } req; 327 struct { 328 u32 width; 329 u32 height; 330 } resp; 331 } body; 332 }; 333 334 #define BCM2835_MBOX_TAG_GET_DEPTH 0x00040005 335 #define BCM2835_MBOX_TAG_TEST_DEPTH 0x00044005 336 #define BCM2835_MBOX_TAG_SET_DEPTH 0x00048005 337 338 struct bcm2835_mbox_tag_depth { 339 struct bcm2835_mbox_tag_hdr tag_hdr; 340 union { 341 /* req not used for get */ 342 struct { 343 u32 bpp; 344 } req; 345 struct { 346 u32 bpp; 347 } resp; 348 } body; 349 }; 350 351 #define BCM2835_MBOX_TAG_GET_PIXEL_ORDER 0x00040006 352 #define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER 0x00044005 353 #define BCM2835_MBOX_TAG_SET_PIXEL_ORDER 0x00048006 354 355 #define BCM2835_MBOX_PIXEL_ORDER_BGR 0 356 #define BCM2835_MBOX_PIXEL_ORDER_RGB 1 357 358 struct bcm2835_mbox_tag_pixel_order { 359 struct bcm2835_mbox_tag_hdr tag_hdr; 360 union { 361 /* req not used for get */ 362 struct { 363 u32 order; 364 } req; 365 struct { 366 u32 order; 367 } resp; 368 } body; 369 }; 370 371 #define BCM2835_MBOX_TAG_GET_ALPHA_MODE 0x00040007 372 #define BCM2835_MBOX_TAG_TEST_ALPHA_MODE 0x00044007 373 #define BCM2835_MBOX_TAG_SET_ALPHA_MODE 0x00048007 374 375 #define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE 0 376 #define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT 1 377 #define BCM2835_MBOX_ALPHA_MODE_IGNORED 2 378 379 struct bcm2835_mbox_tag_alpha_mode { 380 struct bcm2835_mbox_tag_hdr tag_hdr; 381 union { 382 /* req not used for get */ 383 struct { 384 u32 alpha; 385 } req; 386 struct { 387 u32 alpha; 388 } resp; 389 } body; 390 }; 391 392 #define BCM2835_MBOX_TAG_GET_PITCH 0x00040008 393 394 struct bcm2835_mbox_tag_pitch { 395 struct bcm2835_mbox_tag_hdr tag_hdr; 396 union { 397 struct { 398 } req; 399 struct { 400 u32 pitch; 401 } resp; 402 } body; 403 }; 404 405 /* Offset of display window within buffer */ 406 #define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET 0x00040009 407 #define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET 0x00044009 408 #define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET 0x00048009 409 410 struct bcm2835_mbox_tag_virtual_offset { 411 struct bcm2835_mbox_tag_hdr tag_hdr; 412 union { 413 /* req not used for get */ 414 struct { 415 u32 x; 416 u32 y; 417 } req; 418 struct { 419 u32 x; 420 u32 y; 421 } resp; 422 } body; 423 }; 424 425 #define BCM2835_MBOX_TAG_GET_OVERSCAN 0x0004000a 426 #define BCM2835_MBOX_TAG_TEST_OVERSCAN 0x0004400a 427 #define BCM2835_MBOX_TAG_SET_OVERSCAN 0x0004800a 428 429 struct bcm2835_mbox_tag_overscan { 430 struct bcm2835_mbox_tag_hdr tag_hdr; 431 union { 432 /* req not used for get */ 433 struct { 434 u32 top; 435 u32 bottom; 436 u32 left; 437 u32 right; 438 } req; 439 struct { 440 u32 top; 441 u32 bottom; 442 u32 left; 443 u32 right; 444 } resp; 445 } body; 446 }; 447 448 #define BCM2835_MBOX_TAG_GET_PALETTE 0x0004000b 449 450 struct bcm2835_mbox_tag_get_palette { 451 struct bcm2835_mbox_tag_hdr tag_hdr; 452 union { 453 struct { 454 } req; 455 struct { 456 u32 data[1024]; 457 } resp; 458 } body; 459 }; 460 461 #define BCM2835_MBOX_TAG_TEST_PALETTE 0x0004400b 462 463 struct bcm2835_mbox_tag_test_palette { 464 struct bcm2835_mbox_tag_hdr tag_hdr; 465 union { 466 struct { 467 u32 offset; 468 u32 num_entries; 469 u32 data[256]; 470 } req; 471 struct { 472 u32 is_invalid; 473 } resp; 474 } body; 475 }; 476 477 #define BCM2835_MBOX_TAG_SET_PALETTE 0x0004800b 478 479 struct bcm2835_mbox_tag_set_palette { 480 struct bcm2835_mbox_tag_hdr tag_hdr; 481 union { 482 struct { 483 u32 offset; 484 u32 num_entries; 485 u32 data[256]; 486 } req; 487 struct { 488 u32 is_invalid; 489 } resp; 490 } body; 491 }; 492 493 /* 494 * Pass a raw u32 message to the VC, and receive a raw u32 back. 495 * 496 * Returns 0 for success, any other value for error. 497 */ 498 int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv); 499 500 /* 501 * Pass a complete property-style buffer to the VC, and wait until it has 502 * been processed. 503 * 504 * This function expects a pointer to the mbox_hdr structure in an attempt 505 * to ensure some degree of type safety. However, some number of tags and 506 * a termination value are expected to immediately follow the header in 507 * memory, as required by the property protocol. 508 * 509 * Each struct bcm2835_mbox_hdr passed must be allocated with 510 * ALLOC_CACHE_ALIGN_BUFFER(x, y, z) to ensure proper cache flush/invalidate. 511 * 512 * Returns 0 for success, any other value for error. 513 */ 514 int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer); 515 516 #endif 517