1 /*
2  * (C) Copyright 2012,2015 Stephen Warren
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _BCM2835_MBOX_H
8 #define _BCM2835_MBOX_H
9 
10 #include <linux/compiler.h>
11 
12 /*
13  * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU")
14  * and the ARM CPU. The ARM CPU is often thought of as the main CPU.
15  * However, the VideoCore actually controls the initial SoC boot, and hides
16  * much of the hardware behind a protocol. This protocol is transported
17  * using the SoC's mailbox hardware module.
18  *
19  * The mailbox hardware supports passing 32-bit values back and forth.
20  * Presumably by software convention of the firmware, the bottom 4 bits of the
21  * value are used to indicate a logical channel, and the upper 28 bits are the
22  * actual payload. Various channels exist using these simple raw messages. See
23  * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an
24  * example, the messages on the power management channel are a bitmask of
25  * devices whose power should be enabled.
26  *
27  * The property mailbox channel passes messages that contain the (16-byte
28  * aligned) ARM physical address of a memory buffer. This buffer is passed to
29  * the VC for processing, is modified in-place by the VC, and the address then
30  * passed back to the ARM CPU as the response mailbox message to indicate
31  * request completion. The buffers have a generic and extensible format; each
32  * buffer contains a standard header, a list of "tags", and a terminating zero
33  * entry. Each tag contains an ID indicating its type, and length fields for
34  * generic parsing. With some limitations, an arbitrary set of tags may be
35  * combined together into a single message buffer. This file defines structs
36  * representing the header and many individual tag layouts and IDs.
37  */
38 
39 /* Raw mailbox HW */
40 
41 #ifdef CONFIG_BCM2836
42 #define BCM2835_MBOX_PHYSADDR	0x3f00b880
43 #else
44 #define BCM2835_MBOX_PHYSADDR	0x2000b880
45 #endif
46 
47 struct bcm2835_mbox_regs {
48 	u32 read;
49 	u32 rsvd0[5];
50 	u32 status;
51 	u32 config;
52 	u32 write;
53 };
54 
55 #define BCM2835_MBOX_STATUS_WR_FULL	0x80000000
56 #define BCM2835_MBOX_STATUS_RD_EMPTY	0x40000000
57 
58 /* Lower 4-bits are channel ID */
59 #define BCM2835_CHAN_MASK		0xf
60 #define BCM2835_MBOX_PACK(chan, data)	(((data) & (~BCM2835_CHAN_MASK)) | \
61 					 (chan & BCM2835_CHAN_MASK))
62 #define BCM2835_MBOX_UNPACK_CHAN(val)	((val) & BCM2835_CHAN_MASK)
63 #define BCM2835_MBOX_UNPACK_DATA(val)	((val) & (~BCM2835_CHAN_MASK))
64 
65 /* Property mailbox buffer structures */
66 
67 #define BCM2835_MBOX_PROP_CHAN		8
68 
69 /* All message buffers must start with this header */
70 struct bcm2835_mbox_hdr {
71 	u32 buf_size;
72 	u32 code;
73 };
74 
75 #define BCM2835_MBOX_REQ_CODE		0
76 #define BCM2835_MBOX_RESP_CODE_SUCCESS	0x80000000
77 
78 #define BCM2835_MBOX_INIT_HDR(_m_) { \
79 		memset((_m_), 0, sizeof(*(_m_))); \
80 		(_m_)->hdr.buf_size = sizeof(*(_m_)); \
81 		(_m_)->hdr.code = 0; \
82 		(_m_)->end_tag = 0; \
83 	}
84 
85 /*
86  * A message buffer contains a list of tags. Each tag must also start with
87  * a standardized header.
88  */
89 struct bcm2835_mbox_tag_hdr {
90 	u32 tag;
91 	u32 val_buf_size;
92 	u32 val_len;
93 };
94 
95 #define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \
96 		(_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
97 		(_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
98 		(_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \
99 	}
100 
101 #define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \
102 		(_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
103 		(_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
104 		(_t_)->tag_hdr.val_len = 0; \
105 	}
106 
107 /* When responding, the VC sets this bit in val_len to indicate a response */
108 #define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE	0x80000000
109 
110 /*
111  * Below we define the ID and struct for many possible tags. This header only
112  * defines individual tag structs, not entire message structs, since in
113  * general an arbitrary set of tags may be combined into a single message.
114  * Clients of the mbox API are expected to define their own overall message
115  * structures by combining the header, a set of tags, and a terminating
116  * entry. For example,
117  *
118  * struct msg {
119  *     struct bcm2835_mbox_hdr hdr;
120  *     struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
121  *     ... perhaps other tags here ...
122  *     u32 end_tag;
123  * };
124  */
125 
126 #define BCM2835_MBOX_TAG_GET_BOARD_REV	0x00010002
127 
128 #ifdef CONFIG_BCM2836
129 #define BCM2836_BOARD_REV_2_B		0x4
130 #else
131 /*
132  * 0x2..0xf from:
133  * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
134  * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733
135  * http://git.drogon.net/?p=wiringPi;a=blob_plain;f=wiringPi/wiringPi.c;hb=5edd177112c99416f68ba3e8c6c4db6ed942e796
136  */
137 #define BCM2835_BOARD_REV_B_I2C0_2	0x2
138 #define BCM2835_BOARD_REV_B_I2C0_3	0x3
139 #define BCM2835_BOARD_REV_B_I2C1_4	0x4
140 #define BCM2835_BOARD_REV_B_I2C1_5	0x5
141 #define BCM2835_BOARD_REV_B_I2C1_6	0x6
142 #define BCM2835_BOARD_REV_A_7		0x7
143 #define BCM2835_BOARD_REV_A_8		0x8
144 #define BCM2835_BOARD_REV_A_9		0x9
145 #define BCM2835_BOARD_REV_B_REV2_d	0xd
146 #define BCM2835_BOARD_REV_B_REV2_e	0xe
147 #define BCM2835_BOARD_REV_B_REV2_f	0xf
148 #define BCM2835_BOARD_REV_B_PLUS	0x10
149 #define BCM2835_BOARD_REV_CM		0x11
150 #define BCM2835_BOARD_REV_A_PLUS	0x12
151 #define BCM2835_BOARD_REV_B_PLUS_13	0x13
152 #define BCM2835_BOARD_REV_CM_14		0x14
153 #define BCM2835_BOARD_REV_A_PLUS_15	0x15
154 #endif
155 
156 struct bcm2835_mbox_tag_get_board_rev {
157 	struct bcm2835_mbox_tag_hdr tag_hdr;
158 	union {
159 		struct {
160 		} req;
161 		struct {
162 			u32 rev;
163 		} resp;
164 	} body;
165 };
166 
167 #define BCM2835_MBOX_TAG_GET_MAC_ADDRESS	0x00010003
168 
169 struct bcm2835_mbox_tag_get_mac_address {
170 	struct bcm2835_mbox_tag_hdr tag_hdr;
171 	union {
172 		struct {
173 		} req;
174 		struct {
175 			u8 mac[6];
176 			u8 pad[2];
177 		} resp;
178 	} body;
179 };
180 
181 #define BCM2835_MBOX_TAG_GET_ARM_MEMORY		0x00010005
182 
183 struct bcm2835_mbox_tag_get_arm_mem {
184 	struct bcm2835_mbox_tag_hdr tag_hdr;
185 	union {
186 		struct {
187 		} req;
188 		struct {
189 			u32 mem_base;
190 			u32 mem_size;
191 		} resp;
192 	} body;
193 };
194 
195 #define BCM2835_MBOX_POWER_DEVID_SDHCI		0
196 #define BCM2835_MBOX_POWER_DEVID_UART0		1
197 #define BCM2835_MBOX_POWER_DEVID_UART1		2
198 #define BCM2835_MBOX_POWER_DEVID_USB_HCD	3
199 #define BCM2835_MBOX_POWER_DEVID_I2C0		4
200 #define BCM2835_MBOX_POWER_DEVID_I2C1		5
201 #define BCM2835_MBOX_POWER_DEVID_I2C2		6
202 #define BCM2835_MBOX_POWER_DEVID_SPI		7
203 #define BCM2835_MBOX_POWER_DEVID_CCP2TX		8
204 
205 #define BCM2835_MBOX_POWER_STATE_RESP_ON	(1 << 0)
206 /* Device doesn't exist */
207 #define BCM2835_MBOX_POWER_STATE_RESP_NODEV	(1 << 1)
208 
209 #define BCM2835_MBOX_TAG_GET_POWER_STATE	0x00020001
210 
211 struct bcm2835_mbox_tag_get_power_state {
212 	struct bcm2835_mbox_tag_hdr tag_hdr;
213 	union {
214 		struct {
215 			u32 device_id;
216 		} req;
217 		struct {
218 			u32 device_id;
219 			u32 state;
220 		} resp;
221 	} body;
222 };
223 
224 #define BCM2835_MBOX_TAG_SET_POWER_STATE	0x00028001
225 
226 #define BCM2835_MBOX_SET_POWER_STATE_REQ_ON	(1 << 0)
227 #define BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT	(1 << 1)
228 
229 struct bcm2835_mbox_tag_set_power_state {
230 	struct bcm2835_mbox_tag_hdr tag_hdr;
231 	union {
232 		struct {
233 			u32 device_id;
234 			u32 state;
235 		} req;
236 		struct {
237 			u32 device_id;
238 			u32 state;
239 		} resp;
240 	} body;
241 };
242 
243 #define BCM2835_MBOX_TAG_GET_CLOCK_RATE	0x00030002
244 
245 #define BCM2835_MBOX_CLOCK_ID_EMMC	1
246 #define BCM2835_MBOX_CLOCK_ID_UART	2
247 #define BCM2835_MBOX_CLOCK_ID_ARM	3
248 #define BCM2835_MBOX_CLOCK_ID_CORE	4
249 #define BCM2835_MBOX_CLOCK_ID_V3D	5
250 #define BCM2835_MBOX_CLOCK_ID_H264	6
251 #define BCM2835_MBOX_CLOCK_ID_ISP	7
252 #define BCM2835_MBOX_CLOCK_ID_SDRAM	8
253 #define BCM2835_MBOX_CLOCK_ID_PIXEL	9
254 #define BCM2835_MBOX_CLOCK_ID_PWM	10
255 
256 struct bcm2835_mbox_tag_get_clock_rate {
257 	struct bcm2835_mbox_tag_hdr tag_hdr;
258 	union {
259 		struct {
260 			u32 clock_id;
261 		} req;
262 		struct {
263 			u32 clock_id;
264 			u32 rate_hz;
265 		} resp;
266 	} body;
267 };
268 
269 #define BCM2835_MBOX_TAG_ALLOCATE_BUFFER	0x00040001
270 
271 struct bcm2835_mbox_tag_allocate_buffer {
272 	struct bcm2835_mbox_tag_hdr tag_hdr;
273 	union {
274 		struct {
275 			u32 alignment;
276 		} req;
277 		struct {
278 			u32 fb_address;
279 			u32 fb_size;
280 		} resp;
281 	} body;
282 };
283 
284 #define BCM2835_MBOX_TAG_RELEASE_BUFFER		0x00048001
285 
286 struct bcm2835_mbox_tag_release_buffer {
287 	struct bcm2835_mbox_tag_hdr tag_hdr;
288 	union {
289 		struct {
290 		} req;
291 		struct {
292 		} resp;
293 	} body;
294 };
295 
296 #define BCM2835_MBOX_TAG_BLANK_SCREEN		0x00040002
297 
298 struct bcm2835_mbox_tag_blank_screen {
299 	struct bcm2835_mbox_tag_hdr tag_hdr;
300 	union {
301 		struct {
302 			/* bit 0 means on, other bots reserved */
303 			u32 state;
304 		} req;
305 		struct {
306 			u32 state;
307 		} resp;
308 	} body;
309 };
310 
311 /* Physical means output signal */
312 #define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H	0x00040003
313 #define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H	0x00044003
314 #define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H	0x00048003
315 
316 struct bcm2835_mbox_tag_physical_w_h {
317 	struct bcm2835_mbox_tag_hdr tag_hdr;
318 	union {
319 		/* req not used for get */
320 		struct {
321 			u32 width;
322 			u32 height;
323 		} req;
324 		struct {
325 			u32 width;
326 			u32 height;
327 		} resp;
328 	} body;
329 };
330 
331 /* Virtual means display buffer */
332 #define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H	0x00040004
333 #define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H	0x00044004
334 #define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H	0x00048004
335 
336 struct bcm2835_mbox_tag_virtual_w_h {
337 	struct bcm2835_mbox_tag_hdr tag_hdr;
338 	union {
339 		/* req not used for get */
340 		struct {
341 			u32 width;
342 			u32 height;
343 		} req;
344 		struct {
345 			u32 width;
346 			u32 height;
347 		} resp;
348 	} body;
349 };
350 
351 #define BCM2835_MBOX_TAG_GET_DEPTH		0x00040005
352 #define BCM2835_MBOX_TAG_TEST_DEPTH		0x00044005
353 #define BCM2835_MBOX_TAG_SET_DEPTH		0x00048005
354 
355 struct bcm2835_mbox_tag_depth {
356 	struct bcm2835_mbox_tag_hdr tag_hdr;
357 	union {
358 		/* req not used for get */
359 		struct {
360 			u32 bpp;
361 		} req;
362 		struct {
363 			u32 bpp;
364 		} resp;
365 	} body;
366 };
367 
368 #define BCM2835_MBOX_TAG_GET_PIXEL_ORDER	0x00040006
369 #define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER	0x00044005
370 #define BCM2835_MBOX_TAG_SET_PIXEL_ORDER	0x00048006
371 
372 #define BCM2835_MBOX_PIXEL_ORDER_BGR		0
373 #define BCM2835_MBOX_PIXEL_ORDER_RGB		1
374 
375 struct bcm2835_mbox_tag_pixel_order {
376 	struct bcm2835_mbox_tag_hdr tag_hdr;
377 	union {
378 		/* req not used for get */
379 		struct {
380 			u32 order;
381 		} req;
382 		struct {
383 			u32 order;
384 		} resp;
385 	} body;
386 };
387 
388 #define BCM2835_MBOX_TAG_GET_ALPHA_MODE		0x00040007
389 #define BCM2835_MBOX_TAG_TEST_ALPHA_MODE	0x00044007
390 #define BCM2835_MBOX_TAG_SET_ALPHA_MODE		0x00048007
391 
392 #define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE	0
393 #define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT	1
394 #define BCM2835_MBOX_ALPHA_MODE_IGNORED		2
395 
396 struct bcm2835_mbox_tag_alpha_mode {
397 	struct bcm2835_mbox_tag_hdr tag_hdr;
398 	union {
399 		/* req not used for get */
400 		struct {
401 			u32 alpha;
402 		} req;
403 		struct {
404 			u32 alpha;
405 		} resp;
406 	} body;
407 };
408 
409 #define BCM2835_MBOX_TAG_GET_PITCH		0x00040008
410 
411 struct bcm2835_mbox_tag_pitch {
412 	struct bcm2835_mbox_tag_hdr tag_hdr;
413 	union {
414 		struct {
415 		} req;
416 		struct {
417 			u32 pitch;
418 		} resp;
419 	} body;
420 };
421 
422 /* Offset of display window within buffer */
423 #define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET	0x00040009
424 #define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET	0x00044009
425 #define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET	0x00048009
426 
427 struct bcm2835_mbox_tag_virtual_offset {
428 	struct bcm2835_mbox_tag_hdr tag_hdr;
429 	union {
430 		/* req not used for get */
431 		struct {
432 			u32 x;
433 			u32 y;
434 		} req;
435 		struct {
436 			u32 x;
437 			u32 y;
438 		} resp;
439 	} body;
440 };
441 
442 #define BCM2835_MBOX_TAG_GET_OVERSCAN		0x0004000a
443 #define BCM2835_MBOX_TAG_TEST_OVERSCAN		0x0004400a
444 #define BCM2835_MBOX_TAG_SET_OVERSCAN		0x0004800a
445 
446 struct bcm2835_mbox_tag_overscan {
447 	struct bcm2835_mbox_tag_hdr tag_hdr;
448 	union {
449 		/* req not used for get */
450 		struct {
451 			u32 top;
452 			u32 bottom;
453 			u32 left;
454 			u32 right;
455 		} req;
456 		struct {
457 			u32 top;
458 			u32 bottom;
459 			u32 left;
460 			u32 right;
461 		} resp;
462 	} body;
463 };
464 
465 #define BCM2835_MBOX_TAG_GET_PALETTE		0x0004000b
466 
467 struct bcm2835_mbox_tag_get_palette {
468 	struct bcm2835_mbox_tag_hdr tag_hdr;
469 	union {
470 		struct {
471 		} req;
472 		struct {
473 			u32 data[1024];
474 		} resp;
475 	} body;
476 };
477 
478 #define BCM2835_MBOX_TAG_TEST_PALETTE		0x0004400b
479 
480 struct bcm2835_mbox_tag_test_palette {
481 	struct bcm2835_mbox_tag_hdr tag_hdr;
482 	union {
483 		struct {
484 			u32 offset;
485 			u32 num_entries;
486 			u32 data[256];
487 		} req;
488 		struct {
489 			u32 is_invalid;
490 		} resp;
491 	} body;
492 };
493 
494 #define BCM2835_MBOX_TAG_SET_PALETTE		0x0004800b
495 
496 struct bcm2835_mbox_tag_set_palette {
497 	struct bcm2835_mbox_tag_hdr tag_hdr;
498 	union {
499 		struct {
500 			u32 offset;
501 			u32 num_entries;
502 			u32 data[256];
503 		} req;
504 		struct {
505 			u32 is_invalid;
506 		} resp;
507 	} body;
508 };
509 
510 /*
511  * Pass a raw u32 message to the VC, and receive a raw u32 back.
512  *
513  * Returns 0 for success, any other value for error.
514  */
515 int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv);
516 
517 /*
518  * Pass a complete property-style buffer to the VC, and wait until it has
519  * been processed.
520  *
521  * This function expects a pointer to the mbox_hdr structure in an attempt
522  * to ensure some degree of type safety. However, some number of tags and
523  * a termination value are expected to immediately follow the header in
524  * memory, as required by the property protocol.
525  *
526  * Each struct bcm2835_mbox_hdr passed must be allocated with
527  * ALLOC_CACHE_ALIGN_BUFFER(x, y, z) to ensure proper cache flush/invalidate.
528  *
529  * Returns 0 for success, any other value for error.
530  */
531 int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer);
532 
533 #endif
534