1 /* 2 * Copyright (C) 2013 Atmel Corporation 3 * Bo Shen <voice.shen@atmel.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <asm/io.h> 10 #include <asm/arch/at91_common.h> 11 #include <asm/arch/at91_wdt.h> 12 #include <asm/arch/clk.h> 13 #include <spl.h> 14 15 #if defined(CONFIG_AT91SAM9_WATCHDOG) 16 void at91_disable_wdt(void) { } 17 #else 18 void at91_disable_wdt(void) 19 { 20 struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT; 21 22 writel(AT91_WDT_MR_WDDIS, &wdt->mr); 23 } 24 #endif 25 26 #if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \ 27 defined(CONFIG_SAMA5D4) 28 #include <asm/arch/sama5_boot.h> 29 struct { 30 u32 r4; 31 } bootrom_stash __attribute__((section(".data"))); 32 33 u32 spl_boot_device(void) 34 { 35 u32 dev = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_FROM_OFF) & 36 ATMEL_SAMA5_BOOT_FROM_MASK; 37 u32 off = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_DEV_ID_OFF) & 38 ATMEL_SAMA5_BOOT_DEV_ID_MASK; 39 40 #if defined(CONFIG_SYS_USE_MMC) || defined(CONFIG_SD_BOOT) 41 if (dev == ATMEL_SAMA5_BOOT_FROM_MCI) { 42 #if defined(CONFIG_SPL_OF_CONTROL) 43 return BOOT_DEVICE_MMC1; 44 #else 45 if (off == 0) 46 return BOOT_DEVICE_MMC1; 47 if (off == 1) 48 return BOOT_DEVICE_MMC2; 49 printf("ERROR: MMC controller %i not present!\n", dev); 50 hang(); 51 #endif 52 } 53 #endif 54 55 #if defined(CONFIG_SYS_USE_SERIALFLASH) || \ 56 defined(CONFIG_SYS_USE_SPIFLASH) || \ 57 defined(CONFIG_SPI_BOOT) 58 if (dev == ATMEL_SAMA5_BOOT_FROM_SPI) 59 return BOOT_DEVICE_SPI; 60 #endif 61 if (dev == ATMEL_SAMA5_BOOT_FROM_QSPI) 62 return BOOT_DEVICE_SPI; 63 64 if (dev == ATMEL_SAMA5_BOOT_FROM_SMC) 65 return BOOT_DEVICE_NAND; 66 67 if (dev == ATMEL_SAMA5_BOOT_FROM_SAMBA) 68 return BOOT_DEVICE_USB; 69 70 printf("ERROR: SMC/TWI/QSPI boot device not supported!\n" 71 " Boot device %i, controller number %i\n", dev, off); 72 73 return BOOT_DEVICE_NONE; 74 } 75 #else 76 u32 spl_boot_device(void) 77 { 78 #if defined(CONFIG_SYS_USE_MMC) || defined(CONFIG_SD_BOOT) 79 return BOOT_DEVICE_MMC1; 80 #elif defined(CONFIG_SYS_USE_NANDFLASH) || defined(CONFIG_NAND_BOOT) 81 return BOOT_DEVICE_NAND; 82 #elif defined(CONFIG_SYS_USE_SERIALFLASH) || \ 83 defined(CONFIG_SYS_USE_SPIFLASH) || \ 84 defined(CONFIG_SPI_BOOT) 85 return BOOT_DEVICE_SPI; 86 #endif 87 return BOOT_DEVICE_NONE; 88 } 89 #endif 90