xref: /openbmc/u-boot/arch/arm/mach-at91/spl.c (revision 203e94f6)
1 /*
2  * Copyright (C) 2013 Atmel Corporation
3  *		      Bo Shen <voice.shen@atmel.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/at91_common.h>
11 #include <asm/arch/at91_wdt.h>
12 #include <asm/arch/clk.h>
13 #include <spl.h>
14 
15 #if defined(CONFIG_AT91SAM9_WATCHDOG)
16 void at91_disable_wdt(void) { }
17 #else
18 void at91_disable_wdt(void)
19 {
20 	struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
21 
22 	writel(AT91_WDT_MR_WDDIS, &wdt->mr);
23 }
24 #endif
25 
26 #if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
27     defined(CONFIG_SAMA5D4)
28 #include <asm/arch/sama5_boot.h>
29 struct {
30 	u32	r4;
31 } bootrom_stash __attribute__((section(".data")));
32 
33 u32 spl_boot_device(void)
34 {
35 	u32 dev = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_FROM_OFF) &
36 		  ATMEL_SAMA5_BOOT_FROM_MASK;
37 	u32 off = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_DEV_ID_OFF) &
38 		  ATMEL_SAMA5_BOOT_DEV_ID_MASK;
39 
40 #if defined(CONFIG_SYS_USE_MMC)
41 	if (dev == ATMEL_SAMA5_BOOT_FROM_MCI) {
42 #if defined(CONFIG_SPL_OF_CONTROL)
43 		return BOOT_DEVICE_MMC1;
44 #else
45 		if (off == 0)
46 			return BOOT_DEVICE_MMC1;
47 		if (off == 1)
48 			return BOOT_DEVICE_MMC2;
49 		printf("ERROR: MMC controller %i not present!\n", dev);
50 		hang();
51 #endif
52 	}
53 #endif
54 
55 #if defined(CONFIG_SYS_USE_SERIALFLASH) || defined(CONFIG_SYS_USE_SPIFLASH)
56 	if (dev == ATMEL_SAMA5_BOOT_FROM_SPI)
57 		return BOOT_DEVICE_SPI;
58 #endif
59 
60 	if (dev == ATMEL_SAMA5_BOOT_FROM_SMC)
61 		return BOOT_DEVICE_NAND;
62 
63 	if (dev == ATMEL_SAMA5_BOOT_FROM_SAMBA)
64 		return BOOT_DEVICE_USB;
65 
66 	printf("ERROR: SMC/TWI/QSPI boot device not supported!\n"
67 	       "       Boot device %i, controller number %i\n", dev, off);
68 
69 	return BOOT_DEVICE_NONE;
70 }
71 #else
72 u32 spl_boot_device(void)
73 {
74 #ifdef CONFIG_SYS_USE_MMC
75 	return BOOT_DEVICE_MMC1;
76 #elif CONFIG_SYS_USE_NANDFLASH
77 	return BOOT_DEVICE_NAND;
78 #elif CONFIG_SYS_USE_SERIALFLASH || CONFIG_SYS_USE_SPIFLASH
79 	return BOOT_DEVICE_SPI;
80 #endif
81 	return BOOT_DEVICE_NONE;
82 }
83 #endif
84 
85 u32 spl_boot_mode(const u32 boot_device)
86 {
87 	switch (boot_device) {
88 #ifdef CONFIG_SYS_USE_MMC
89 	case BOOT_DEVICE_MMC1:
90 	case BOOT_DEVICE_MMC2:
91 		return MMCSD_MODE_FS;
92 		break;
93 #endif
94 	case BOOT_DEVICE_NONE:
95 	default:
96 		hang();
97 	}
98 }
99