1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2007-2008
4  * Stelian Pop <stelian@popies.net>
5  * Lead Tech Design <www.leadtechdesign.com>
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/hardware.h>
11 #include <asm/arch/at91_pit.h>
12 #include <asm/arch/clk.h>
13 #include <div64.h>
14 
15 #if !defined(CONFIG_AT91FAMILY)
16 # error You need to define CONFIG_AT91FAMILY in your board config!
17 #endif
18 
19 DECLARE_GLOBAL_DATA_PTR;
20 
21 /*
22  * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
23  * setting the 20 bit counter period to its maximum (0xfffff).
24  * (See the relevant data sheets to understand that this really works)
25  *
26  * We do also mimic the typical powerpc way of incrementing
27  * two 32 bit registers called tbl and tbu.
28  *
29  * Those registers increment at 1/16 the main clock rate.
30  */
31 
32 #define TIMER_LOAD_VAL	0xfffff
33 
34 /*
35  * Use the PITC in full 32 bit incrementing mode
36  */
timer_init(void)37 int timer_init(void)
38 {
39 	at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
40 
41 	at91_periph_clk_enable(ATMEL_ID_SYS);
42 
43 	/* Enable PITC */
44 	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
45 
46 	gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
47 
48 	return 0;
49 }
50 
51 /*
52  * Return the number of timer ticks per second.
53  */
get_tbclk(void)54 ulong get_tbclk(void)
55 {
56 	return gd->arch.timer_rate_hz;
57 }
58