1/* SPDX-License-Identifier: GPL-2.0+ */ 2/* 3 * vectors - Generic ARM exception table code 4 * 5 * Copyright (c) 1998 Dan Malek <dmalek@jlc.net> 6 * Copyright (c) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> 7 * Copyright (c) 2000 Wolfgang Denk <wd@denx.de> 8 * Copyright (c) 2001 Alex Züpke <azu@sysgo.de> 9 * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> 10 * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> 11 * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> 12 * Copyright (c) 2002 Kyle Harris <kharris@nexus-tech.net> 13 */ 14 15#include <config.h> 16 17/* 18 * A macro to allow insertion of an ARM exception vector either 19 * for the non-boot0 case or by a boot0-header. 20 */ 21 .macro ARM_VECTORS 22 b reset 23 ldr pc, _undefined_instruction 24 ldr pc, _software_interrupt 25 ldr pc, _prefetch_abort 26 ldr pc, _data_abort 27 ldr pc, _not_used 28 ldr pc, _irq 29 ldr pc, _fiq 30 .endm 31 32 33/* 34 ************************************************************************* 35 * 36 * Symbol _start is referenced elsewhere, so make it global 37 * 38 ************************************************************************* 39 */ 40 41.globl _start 42 43/* 44 ************************************************************************* 45 * 46 * Vectors have their own section so linker script can map them easily 47 * 48 ************************************************************************* 49 */ 50 51 .section ".vectors", "ax" 52 53#if defined(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK) 54/* 55 * Various SoCs need something special and SoC-specific up front in 56 * order to boot, allow them to set that in their boot0.h file and then 57 * use it here. 58 * 59 * To allow a boot0 hook to insert a 'special' sequence after the vector 60 * table (e.g. for the socfpga), the presence of a boot0 hook supresses 61 * the below vector table and assumes that the vector table is filled in 62 * by the boot0 hook. The requirements for a boot0 hook thus are: 63 * (1) defines '_start:' as appropriate 64 * (2) inserts the vector table using ARM_VECTORS as appropriate 65 */ 66#include <asm/arch/boot0.h> 67 68#else 69 70/* 71 ************************************************************************* 72 * 73 * Exception vectors as described in ARM reference manuals 74 * 75 * Uses indirect branch to allow reaching handlers anywhere in memory. 76 * 77 ************************************************************************* 78 */ 79 80_start: 81#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG 82 .word CONFIG_SYS_DV_NOR_BOOT_CFG 83#endif 84 ARM_VECTORS 85#endif /* !defined(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK) */ 86 87/* 88 ************************************************************************* 89 * 90 * Indirect vectors table 91 * 92 * Symbols referenced here must be defined somewhere else 93 * 94 ************************************************************************* 95 */ 96 97 .globl _undefined_instruction 98 .globl _software_interrupt 99 .globl _prefetch_abort 100 .globl _data_abort 101 .globl _not_used 102 .globl _irq 103 .globl _fiq 104 105_undefined_instruction: .word undefined_instruction 106_software_interrupt: .word software_interrupt 107_prefetch_abort: .word prefetch_abort 108_data_abort: .word data_abort 109_not_used: .word not_used 110_irq: .word irq 111_fiq: .word fiq 112 113 .balignl 16,0xdeadbeef 114 115/* 116 ************************************************************************* 117 * 118 * Interrupt handling 119 * 120 ************************************************************************* 121 */ 122 123/* SPL interrupt handling: just hang */ 124 125#ifdef CONFIG_SPL_BUILD 126 127 .align 5 128undefined_instruction: 129software_interrupt: 130prefetch_abort: 131data_abort: 132not_used: 133irq: 134fiq: 1351: 136 b 1b /* hang and never return */ 137 138#else /* !CONFIG_SPL_BUILD */ 139 140/* IRQ stack memory (calculated at run-time) + 8 bytes */ 141.globl IRQ_STACK_START_IN 142IRQ_STACK_START_IN: 143#ifdef IRAM_BASE_ADDR 144 .word IRAM_BASE_ADDR + 0x20 145#else 146 .word 0x0badc0de 147#endif 148 149@ 150@ IRQ stack frame. 151@ 152#define S_FRAME_SIZE 72 153 154#define S_OLD_R0 68 155#define S_PSR 64 156#define S_PC 60 157#define S_LR 56 158#define S_SP 52 159 160#define S_IP 48 161#define S_FP 44 162#define S_R10 40 163#define S_R9 36 164#define S_R8 32 165#define S_R7 28 166#define S_R6 24 167#define S_R5 20 168#define S_R4 16 169#define S_R3 12 170#define S_R2 8 171#define S_R1 4 172#define S_R0 0 173 174#define MODE_SVC 0x13 175#define I_BIT 0x80 176 177/* 178 * use bad_save_user_regs for abort/prefetch/undef/swi ... 179 * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling 180 */ 181 182 .macro bad_save_user_regs 183 @ carve out a frame on current user stack 184 sub sp, sp, #S_FRAME_SIZE 185 stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 186 ldr r2, IRQ_STACK_START_IN 187 @ get values for "aborted" pc and cpsr (into parm regs) 188 ldmia r2, {r2 - r3} 189 add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack 190 add r5, sp, #S_SP 191 mov r1, lr 192 stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr 193 mov r0, sp @ save current stack into r0 (param register) 194 .endm 195 196 .macro irq_save_user_regs 197 sub sp, sp, #S_FRAME_SIZE 198 stmia sp, {r0 - r12} @ Calling r0-r12 199 @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. 200 add r8, sp, #S_PC 201 stmdb r8, {sp, lr}^ @ Calling SP, LR 202 str lr, [r8, #0] @ Save calling PC 203 mrs r6, spsr 204 str r6, [r8, #4] @ Save CPSR 205 str r0, [r8, #8] @ Save OLD_R0 206 mov r0, sp 207 .endm 208 209 .macro irq_restore_user_regs 210 ldmia sp, {r0 - lr}^ @ Calling r0 - lr 211 mov r0, r0 212 ldr lr, [sp, #S_PC] @ Get PC 213 add sp, sp, #S_FRAME_SIZE 214 subs pc, lr, #4 @ return & move spsr_svc into cpsr 215 .endm 216 217 .macro get_bad_stack 218 ldr r13, IRQ_STACK_START_IN @ setup our mode stack 219 220 str lr, [r13] @ save caller lr in position 0 of saved stack 221 mrs lr, spsr @ get the spsr 222 str lr, [r13, #4] @ save spsr in position 1 of saved stack 223 mov r13, #MODE_SVC @ prepare SVC-Mode 224 @ msr spsr_c, r13 225 msr spsr, r13 @ switch modes, make sure moves will execute 226 mov lr, pc @ capture return pc 227 movs pc, lr @ jump to next instruction & switch modes. 228 .endm 229 230 .macro get_irq_stack @ setup IRQ stack 231 ldr sp, IRQ_STACK_START 232 .endm 233 234 .macro get_fiq_stack @ setup FIQ stack 235 ldr sp, FIQ_STACK_START 236 .endm 237 238/* 239 * exception handlers 240 */ 241 242 .align 5 243undefined_instruction: 244 get_bad_stack 245 bad_save_user_regs 246 bl do_undefined_instruction 247 248 .align 5 249software_interrupt: 250 get_bad_stack 251 bad_save_user_regs 252 bl do_software_interrupt 253 254 .align 5 255prefetch_abort: 256 get_bad_stack 257 bad_save_user_regs 258 bl do_prefetch_abort 259 260 .align 5 261data_abort: 262 get_bad_stack 263 bad_save_user_regs 264 bl do_data_abort 265 266 .align 5 267not_used: 268 get_bad_stack 269 bad_save_user_regs 270 bl do_not_used 271 272 273 .align 5 274irq: 275 get_bad_stack 276 bad_save_user_regs 277 bl do_irq 278 279 .align 5 280fiq: 281 get_bad_stack 282 bad_save_user_regs 283 bl do_fiq 284 285#endif /* CONFIG_SPL_BUILD */ 286