xref: /openbmc/u-boot/arch/arm/lib/semihosting.c (revision cf0bcd7d)
1 /*
2  * Copyright 2014 Broadcom Corporation
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 /*
8  * Minimal semihosting implementation for reading files into memory. If more
9  * features like writing files or console output are required they can be
10  * added later. This code has been tested on arm64/aarch64 fastmodel only.
11  * An untested placeholder exists for armv7 architectures, but since they
12  * are commonly available in silicon now, fastmodel usage makes less sense
13  * for them.
14  */
15 #include <common.h>
16 #include <command.h>
17 
18 #define SYSOPEN		0x01
19 #define SYSCLOSE	0x02
20 #define SYSREAD		0x06
21 #define SYSFLEN		0x0C
22 
23 #define MODE_READ	0x0
24 #define MODE_READBIN	0x1
25 
26 /*
27  * Call the handler
28  */
29 static noinline long smh_trap(unsigned int sysnum, void *addr)
30 {
31 	register long result asm("r0");
32 #if defined(CONFIG_ARM64)
33 	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
34 #elif defined(CONFIG_CPU_V7M)
35 	asm volatile ("bkpt #0xAB" : "=r" (result) : "0"(sysnum), "r"(addr));
36 #else
37 	/* Note - untested placeholder */
38 	asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr));
39 #endif
40 	return result;
41 }
42 
43 /*
44  * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
45  * descriptor or -1 on error.
46  */
47 static long smh_open(const char *fname, char *modestr)
48 {
49 	long fd;
50 	unsigned long mode;
51 	struct smh_open_s {
52 		const char *fname;
53 		unsigned long mode;
54 		size_t len;
55 	} open;
56 
57 	debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
58 
59 	/* Check the file mode */
60 	if (!(strcmp(modestr, "r"))) {
61 		mode = MODE_READ;
62 	} else if (!(strcmp(modestr, "rb"))) {
63 		mode = MODE_READBIN;
64 	} else {
65 		printf("%s: ERROR mode \'%s\' not supported\n", __func__,
66 		       modestr);
67 		return -1;
68 	}
69 
70 	open.fname = fname;
71 	open.len = strlen(fname);
72 	open.mode = mode;
73 
74 	/* Open the file on the host */
75 	fd = smh_trap(SYSOPEN, &open);
76 	if (fd == -1)
77 		printf("%s: ERROR fd %ld for file \'%s\'\n", __func__, fd,
78 		       fname);
79 
80 	return fd;
81 }
82 
83 /*
84  * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure
85  */
86 static long smh_read(long fd, void *memp, size_t len)
87 {
88 	long ret;
89 	struct smh_read_s {
90 		long fd;
91 		void *memp;
92 		size_t len;
93 	} read;
94 
95 	debug("%s: fd %ld, memp %p, len %zu\n", __func__, fd, memp, len);
96 
97 	read.fd = fd;
98 	read.memp = memp;
99 	read.len = len;
100 
101 	ret = smh_trap(SYSREAD, &read);
102 	if (ret < 0) {
103 		/*
104 		 * The ARM handler allows for returning partial lengths,
105 		 * but in practice this never happens so rather than create
106 		 * hard to maintain partial read loops and such, just fail
107 		 * with an error message.
108 		 */
109 		printf("%s: ERROR ret %ld, fd %ld, len %zu memp %p\n",
110 		       __func__, ret, fd, len, memp);
111 		return -1;
112 	}
113 
114 	return 0;
115 }
116 
117 /*
118  * Close the file using the file descriptor
119  */
120 static long smh_close(long fd)
121 {
122 	long ret;
123 
124 	debug("%s: fd %ld\n", __func__, fd);
125 
126 	ret = smh_trap(SYSCLOSE, &fd);
127 	if (ret == -1)
128 		printf("%s: ERROR fd %ld\n", __func__, fd);
129 
130 	return ret;
131 }
132 
133 /*
134  * Get the file length from the file descriptor
135  */
136 static long smh_len_fd(long fd)
137 {
138 	long ret;
139 
140 	debug("%s: fd %ld\n", __func__, fd);
141 
142 	ret = smh_trap(SYSFLEN, &fd);
143 	if (ret == -1)
144 		printf("%s: ERROR ret %ld, fd %ld\n", __func__, ret, fd);
145 
146 	return ret;
147 }
148 
149 static int smh_load_file(const char * const name, ulong load_addr,
150 			 ulong *end_addr)
151 {
152 	long fd;
153 	long len;
154 	long ret;
155 
156 	fd = smh_open(name, "rb");
157 	if (fd == -1)
158 		return -1;
159 
160 	len = smh_len_fd(fd);
161 	if (len < 0) {
162 		smh_close(fd);
163 		return -1;
164 	}
165 
166 	ret = smh_read(fd, (void *)load_addr, len);
167 	smh_close(fd);
168 
169 	if (ret == 0) {
170 		*end_addr = load_addr + len - 1;
171 		printf("loaded file %s from %08lX to %08lX, %08lX bytes\n",
172 		       name,
173 		       load_addr,
174 		       *end_addr,
175 		       len);
176 	} else {
177 		printf("read failed\n");
178 		return 0;
179 	}
180 
181 	return 0;
182 }
183 
184 static int do_smhload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
185 {
186 	if (argc == 3 || argc == 4) {
187 		ulong load_addr;
188 		ulong end_addr = 0;
189 		int ret;
190 		char end_str[64];
191 
192 		load_addr = simple_strtoul(argv[2], NULL, 16);
193 		if (!load_addr)
194 			return -1;
195 
196 		ret = smh_load_file(argv[1], load_addr, &end_addr);
197 		if (ret < 0)
198 			return CMD_RET_FAILURE;
199 
200 		/* Optionally save returned end to the environment */
201 		if (argc == 4) {
202 			sprintf(end_str, "0x%08lx", end_addr);
203 			env_set(argv[3], end_str);
204 		}
205 	} else {
206 		return CMD_RET_USAGE;
207 	}
208 	return 0;
209 }
210 
211 U_BOOT_CMD(smhload, 4, 0, do_smhload, "load a file using semihosting",
212 	   "<file> 0x<address> [end var]\n"
213 	   "    - load a semihosted file to the address specified\n"
214 	   "      if the optional [end var] is specified, the end\n"
215 	   "      address of the file will be stored in this environment\n"
216 	   "      variable.\n");
217