xref: /openbmc/u-boot/arch/arm/lib/semihosting.c (revision 4519668b)
1 /*
2  * Copyright 2014 Broadcom Corporation
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 /*
8  * Minimal semihosting implementation for reading files into memory. If more
9  * features like writing files or console output are required they can be
10  * added later. This code has been tested on arm64/aarch64 fastmodel only.
11  * An untested placeholder exists for armv7 architectures, but since they
12  * are commonly available in silicon now, fastmodel usage makes less sense
13  * for them.
14  */
15 #include <common.h>
16 #include <command.h>
17 
18 #define SYSOPEN		0x01
19 #define SYSCLOSE	0x02
20 #define SYSREAD		0x06
21 #define SYSFLEN		0x0C
22 
23 #define MODE_READ	0x0
24 #define MODE_READBIN	0x1
25 
26 /*
27  * Call the handler
28  */
29 static noinline long smh_trap(unsigned int sysnum, void *addr)
30 {
31 	register long result asm("r0");
32 #if defined(CONFIG_ARM64)
33 	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
34 #else
35 	/* Note - untested placeholder */
36 	asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr));
37 #endif
38 	return result;
39 }
40 
41 /*
42  * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
43  * descriptor or -1 on error.
44  */
45 static long smh_open(const char *fname, char *modestr)
46 {
47 	long fd;
48 	unsigned long mode;
49 	struct smh_open_s {
50 		const char *fname;
51 		unsigned long mode;
52 		size_t len;
53 	} open;
54 
55 	debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
56 
57 	/* Check the file mode */
58 	if (!(strcmp(modestr, "r"))) {
59 		mode = MODE_READ;
60 	} else if (!(strcmp(modestr, "rb"))) {
61 		mode = MODE_READBIN;
62 	} else {
63 		printf("%s: ERROR mode \'%s\' not supported\n", __func__,
64 		       modestr);
65 		return -1;
66 	}
67 
68 	open.fname = fname;
69 	open.len = strlen(fname);
70 	open.mode = mode;
71 
72 	/* Open the file on the host */
73 	fd = smh_trap(SYSOPEN, &open);
74 	if (fd == -1)
75 		printf("%s: ERROR fd %ld for file \'%s\'\n", __func__, fd,
76 		       fname);
77 
78 	return fd;
79 }
80 
81 /*
82  * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure
83  */
84 static long smh_read(long fd, void *memp, size_t len)
85 {
86 	long ret;
87 	struct smh_read_s {
88 		long fd;
89 		void *memp;
90 		size_t len;
91 	} read;
92 
93 	debug("%s: fd %ld, memp %p, len %lu\n", __func__, fd, memp, len);
94 
95 	read.fd = fd;
96 	read.memp = memp;
97 	read.len = len;
98 
99 	ret = smh_trap(SYSREAD, &read);
100 	if (ret < 0) {
101 		/*
102 		 * The ARM handler allows for returning partial lengths,
103 		 * but in practice this never happens so rather than create
104 		 * hard to maintain partial read loops and such, just fail
105 		 * with an error message.
106 		 */
107 		printf("%s: ERROR ret %ld, fd %ld, len %lu memp %p\n",
108 		       __func__, ret, fd, len, memp);
109 		return -1;
110 	}
111 
112 	return 0;
113 }
114 
115 /*
116  * Close the file using the file descriptor
117  */
118 static long smh_close(long fd)
119 {
120 	long ret;
121 
122 	debug("%s: fd %ld\n", __func__, fd);
123 
124 	ret = smh_trap(SYSCLOSE, &fd);
125 	if (ret == -1)
126 		printf("%s: ERROR fd %ld\n", __func__, fd);
127 
128 	return ret;
129 }
130 
131 /*
132  * Get the file length from the file descriptor
133  */
134 static long smh_len_fd(long fd)
135 {
136 	long ret;
137 
138 	debug("%s: fd %ld\n", __func__, fd);
139 
140 	ret = smh_trap(SYSFLEN, &fd);
141 	if (ret == -1)
142 		printf("%s: ERROR ret %ld, fd %ld\n", __func__, ret, fd);
143 
144 	return ret;
145 }
146 
147 static int smh_load_file(const char * const name, ulong load_addr,
148 			 ulong *end_addr)
149 {
150 	long fd;
151 	long len;
152 	long ret;
153 
154 	fd = smh_open(name, "rb");
155 	if (fd == -1)
156 		return -1;
157 
158 	len = smh_len_fd(fd);
159 	if (len < 0) {
160 		smh_close(fd);
161 		return -1;
162 	}
163 
164 	ret = smh_read(fd, (void *)load_addr, len);
165 	smh_close(fd);
166 
167 	if (ret == 0) {
168 		*end_addr = load_addr + len - 1;
169 		printf("loaded file %s from %08lX to %08lX, %08lX bytes\n",
170 		       name,
171 		       load_addr,
172 		       *end_addr,
173 		       len);
174 	} else {
175 		printf("read failed\n");
176 		return 0;
177 	}
178 
179 	return 0;
180 }
181 
182 static int do_smhload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
183 {
184 	if (argc == 3 || argc == 4) {
185 		ulong load_addr;
186 		ulong end_addr = 0;
187 		ulong ret;
188 		char end_str[64];
189 
190 		load_addr = simple_strtoul(argv[2], NULL, 16);
191 		if (!load_addr)
192 			return -1;
193 
194 		ret = smh_load_file(argv[1], load_addr, &end_addr);
195 		if (ret < 0)
196 			return 1;
197 
198 		/* Optionally save returned end to the environment */
199 		if (argc == 4) {
200 			sprintf(end_str, "0x%08lx", end_addr);
201 			setenv(argv[3], end_str);
202 		}
203 	} else {
204 		return CMD_RET_USAGE;
205 	}
206 	return 0;
207 }
208 
209 U_BOOT_CMD(smhload, 4, 0, do_smhload, "load a file using semihosting",
210 	   "<file> 0x<address> [end var]\n"
211 	   "    - load a semihosted file to the address specified\n"
212 	   "      if the optional [end var] is specified, the end\n"
213 	   "      address of the file will be stored in this environment\n"
214 	   "      variable.\n");
215