1/* 2 * crt0 - C-runtime startup Code for AArch64 U-Boot 3 * 4 * (C) Copyright 2013 5 * David Feng <fenghua@phytium.com.cn> 6 * 7 * (C) Copyright 2012 8 * Albert ARIBAUD <albert.u.boot@aribaud.net> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13#include <config.h> 14#include <asm-offsets.h> 15#include <asm/macro.h> 16#include <linux/linkage.h> 17 18/* 19 * This file handles the target-independent stages of the U-Boot 20 * start-up where a C runtime environment is needed. Its entry point 21 * is _main and is branched into from the target's start.S file. 22 * 23 * _main execution sequence is: 24 * 25 * 1. Set up initial environment for calling board_init_f(). 26 * This environment only provides a stack and a place to store 27 * the GD ('global data') structure, both located in some readily 28 * available RAM (SRAM, locked cache...). In this context, VARIABLE 29 * global data, initialized or not (BSS), are UNAVAILABLE; only 30 * CONSTANT initialized data are available. GD should be zeroed 31 * before board_init_f() is called. 32 * 33 * 2. Call board_init_f(). This function prepares the hardware for 34 * execution from system RAM (DRAM, DDR...) As system RAM may not 35 * be available yet, , board_init_f() must use the current GD to 36 * store any data which must be passed on to later stages. These 37 * data include the relocation destination, the future stack, and 38 * the future GD location. 39 * 40 * 3. Set up intermediate environment where the stack and GD are the 41 * ones allocated by board_init_f() in system RAM, but BSS and 42 * initialized non-const data are still not available. 43 * 44 * 4a.For U-Boot proper (not SPL), call relocate_code(). This function 45 * relocates U-Boot from its current location into the relocation 46 * destination computed by board_init_f(). 47 * 48 * 4b.For SPL, board_init_f() just returns (to crt0). There is no 49 * code relocation in SPL. 50 * 51 * 5. Set up final environment for calling board_init_r(). This 52 * environment has BSS (initialized to 0), initialized non-const 53 * data (initialized to their intended value), and stack in system 54 * RAM (for SPL moving the stack and GD into RAM is optional - see 55 * CONFIG_SPL_STACK_R). GD has retained values set by board_init_f(). 56 * 57 * TODO: For SPL, implement stack relocation on AArch64. 58 * 59 * 6. For U-Boot proper (not SPL), some CPUs have some work left to do 60 * at this point regarding memory, so call c_runtime_cpu_setup. 61 * 62 * 7. Branch to board_init_r(). 63 * 64 * For more information see 'Board Initialisation Flow in README. 65 */ 66 67ENTRY(_main) 68 69/* 70 * Set up initial C runtime environment and call board_init_f(0). 71 */ 72#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) 73 ldr x0, =(CONFIG_TPL_STACK) 74#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) 75 ldr x0, =(CONFIG_SPL_STACK) 76#else 77 ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) 78#endif 79 bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ 80 mov x0, sp 81 bl board_init_f_alloc_reserve 82 mov sp, x0 83 /* set up gd here, outside any C code */ 84 mov x18, x0 85 bl board_init_f_init_reserve 86 87 mov x0, #0 88 bl board_init_f 89 90#if !defined(CONFIG_SPL_BUILD) 91/* 92 * Set up intermediate environment (new sp and gd) and call 93 * relocate_code(addr_moni). Trick here is that we'll return 94 * 'here' but relocated. 95 */ 96 ldr x0, [x18, #GD_START_ADDR_SP] /* x0 <- gd->start_addr_sp */ 97 bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ 98 ldr x18, [x18, #GD_NEW_GD] /* x18 <- gd->new_gd */ 99 100 adr lr, relocation_return 101 ldr x9, [x18, #GD_RELOC_OFF] /* x9 <- gd->reloc_off */ 102 add lr, lr, x9 /* new return address after relocation */ 103 ldr x0, [x18, #GD_RELOCADDR] /* x0 <- gd->relocaddr */ 104 b relocate_code 105 106relocation_return: 107 108/* 109 * Set up final (full) environment 110 */ 111 bl c_runtime_cpu_setup /* still call old routine */ 112#endif /* !CONFIG_SPL_BUILD */ 113#if defined(CONFIG_SPL_BUILD) 114 bl spl_relocate_stack_gd /* may return NULL */ 115 /* 116 * Perform 'sp = (x0 != NULL) ? x0 : sp' while working 117 * around the constraint that conditional moves can not 118 * have 'sp' as an operand 119 */ 120 mov x1, sp 121 cmp x0, #0 122 csel x0, x0, x1, ne 123 mov sp, x0 124#endif 125 126/* 127 * Clear BSS section 128 */ 129 ldr x0, =__bss_start /* this is auto-relocated! */ 130 ldr x1, =__bss_end /* this is auto-relocated! */ 131clear_loop: 132 str xzr, [x0], #8 133 cmp x0, x1 134 b.lo clear_loop 135 136 /* call board_init_r(gd_t *id, ulong dest_addr) */ 137 mov x0, x18 /* gd_t */ 138 ldr x1, [x18, #GD_RELOCADDR] /* dest_addr */ 139 b board_init_r /* PC relative jump */ 140 141 /* NOTREACHED - board_init_r() does not return */ 142 143ENDPROC(_main) 144