xref: /openbmc/u-boot/arch/arm/lib/cache-cp15.c (revision c2012cb4)
1 /*
2  * (C) Copyright 2002
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <asm/system.h>
10 #include <asm/cache.h>
11 #include <linux/compiler.h>
12 
13 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
14 
15 DECLARE_GLOBAL_DATA_PTR;
16 
17 __weak void arm_init_before_mmu(void)
18 {
19 }
20 
21 __weak void arm_init_domains(void)
22 {
23 }
24 
25 void set_section_dcache(int section, enum dcache_option option)
26 {
27 #ifdef CONFIG_ARMV7_LPAE
28 	u64 *page_table = (u64 *)gd->arch.tlb_addr;
29 	/* Need to set the access flag to not fault */
30 	u64 value = TTB_SECT_AP | TTB_SECT_AF;
31 #else
32 	u32 *page_table = (u32 *)gd->arch.tlb_addr;
33 	u32 value = TTB_SECT_AP;
34 #endif
35 
36 	/* Add the page offset */
37 	value |= ((u32)section << MMU_SECTION_SHIFT);
38 
39 	/* Add caching bits */
40 	value |= option;
41 
42 	/* Set PTE */
43 	page_table[section] = value;
44 }
45 
46 __weak void mmu_page_table_flush(unsigned long start, unsigned long stop)
47 {
48 	debug("%s: Warning: not implemented\n", __func__);
49 }
50 
51 void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
52 				     enum dcache_option option)
53 {
54 #ifdef CONFIG_ARMV7_LPAE
55 	u64 *page_table = (u64 *)gd->arch.tlb_addr;
56 #else
57 	u32 *page_table = (u32 *)gd->arch.tlb_addr;
58 #endif
59 	unsigned long startpt, stoppt;
60 	unsigned long upto, end;
61 
62 	end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
63 	start = start >> MMU_SECTION_SHIFT;
64 #ifdef CONFIG_ARMV7_LPAE
65 	debug("%s: start=%pa, size=%zu, option=%llx\n", __func__, &start, size,
66 	      option);
67 #else
68 	debug("%s: start=%pa, size=%zu, option=0x%x\n", __func__, &start, size,
69 	      option);
70 #endif
71 	for (upto = start; upto < end; upto++)
72 		set_section_dcache(upto, option);
73 
74 	/*
75 	 * Make sure range is cache line aligned
76 	 * Only CPU maintains page tables, hence it is safe to always
77 	 * flush complete cache lines...
78 	 */
79 
80 	startpt = (unsigned long)&page_table[start];
81 	startpt &= ~(CONFIG_SYS_CACHELINE_SIZE - 1);
82 	stoppt = (unsigned long)&page_table[end];
83 	stoppt = ALIGN(stoppt, CONFIG_SYS_CACHELINE_SIZE);
84 	mmu_page_table_flush(startpt, stoppt);
85 }
86 
87 __weak void dram_bank_mmu_setup(int bank)
88 {
89 	bd_t *bd = gd->bd;
90 	int	i;
91 
92 	debug("%s: bank: %d\n", __func__, bank);
93 	for (i = bd->bi_dram[bank].start >> MMU_SECTION_SHIFT;
94 	     i < (bd->bi_dram[bank].start >> MMU_SECTION_SHIFT) +
95 		 (bd->bi_dram[bank].size >> MMU_SECTION_SHIFT);
96 	     i++) {
97 #if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
98 		set_section_dcache(i, DCACHE_WRITETHROUGH);
99 #elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
100 		set_section_dcache(i, DCACHE_WRITEALLOC);
101 #else
102 		set_section_dcache(i, DCACHE_WRITEBACK);
103 #endif
104 	}
105 }
106 
107 /* to activate the MMU we need to set up virtual memory: use 1M areas */
108 static inline void mmu_setup(void)
109 {
110 	int i;
111 	u32 reg;
112 
113 	arm_init_before_mmu();
114 	/* Set up an identity-mapping for all 4GB, rw for everyone */
115 	for (i = 0; i < ((4096ULL * 1024 * 1024) >> MMU_SECTION_SHIFT); i++)
116 		set_section_dcache(i, DCACHE_OFF);
117 
118 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
119 		dram_bank_mmu_setup(i);
120 	}
121 
122 #if defined(CONFIG_ARMV7_LPAE) && __LINUX_ARM_ARCH__ != 4
123 	/* Set up 4 PTE entries pointing to our 4 1GB page tables */
124 	for (i = 0; i < 4; i++) {
125 		u64 *page_table = (u64 *)(gd->arch.tlb_addr + (4096 * 4));
126 		u64 tpt = gd->arch.tlb_addr + (4096 * i);
127 		page_table[i] = tpt | TTB_PAGETABLE;
128 	}
129 
130 	reg = TTBCR_EAE;
131 #if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
132 	reg |= TTBCR_ORGN0_WT | TTBCR_IRGN0_WT;
133 #elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
134 	reg |= TTBCR_ORGN0_WBWA | TTBCR_IRGN0_WBWA;
135 #else
136 	reg |= TTBCR_ORGN0_WBNWA | TTBCR_IRGN0_WBNWA;
137 #endif
138 
139 	if (is_hyp()) {
140 		/* Set HTCR to enable LPAE */
141 		asm volatile("mcr p15, 4, %0, c2, c0, 2"
142 			: : "r" (reg) : "memory");
143 		/* Set HTTBR0 */
144 		asm volatile("mcrr p15, 4, %0, %1, c2"
145 			:
146 			: "r"(gd->arch.tlb_addr + (4096 * 4)), "r"(0)
147 			: "memory");
148 		/* Set HMAIR */
149 		asm volatile("mcr p15, 4, %0, c10, c2, 0"
150 			: : "r" (MEMORY_ATTRIBUTES) : "memory");
151 	} else {
152 		/* Set TTBCR to enable LPAE */
153 		asm volatile("mcr p15, 0, %0, c2, c0, 2"
154 			: : "r" (reg) : "memory");
155 		/* Set 64-bit TTBR0 */
156 		asm volatile("mcrr p15, 0, %0, %1, c2"
157 			:
158 			: "r"(gd->arch.tlb_addr + (4096 * 4)), "r"(0)
159 			: "memory");
160 		/* Set MAIR */
161 		asm volatile("mcr p15, 0, %0, c10, c2, 0"
162 			: : "r" (MEMORY_ATTRIBUTES) : "memory");
163 	}
164 #elif defined(CONFIG_CPU_V7)
165 	if (is_hyp()) {
166 		/* Set HTCR to disable LPAE */
167 		asm volatile("mcr p15, 4, %0, c2, c0, 2"
168 			: : "r" (0) : "memory");
169 	} else {
170 		/* Set TTBCR to disable LPAE */
171 		asm volatile("mcr p15, 0, %0, c2, c0, 2"
172 			: : "r" (0) : "memory");
173 	}
174 	/* Set TTBR0 */
175 	reg = gd->arch.tlb_addr & TTBR0_BASE_ADDR_MASK;
176 #if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
177 	reg |= TTBR0_RGN_WT | TTBR0_IRGN_WT;
178 #elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
179 	reg |= TTBR0_RGN_WBWA | TTBR0_IRGN_WBWA;
180 #else
181 	reg |= TTBR0_RGN_WB | TTBR0_IRGN_WB;
182 #endif
183 	asm volatile("mcr p15, 0, %0, c2, c0, 0"
184 		     : : "r" (reg) : "memory");
185 #else
186 	/* Copy the page table address to cp15 */
187 	asm volatile("mcr p15, 0, %0, c2, c0, 0"
188 		     : : "r" (gd->arch.tlb_addr) : "memory");
189 #endif
190 	/* Set the access control to all-supervisor */
191 	asm volatile("mcr p15, 0, %0, c3, c0, 0"
192 		     : : "r" (~0));
193 
194 	arm_init_domains();
195 
196 	/* and enable the mmu */
197 	reg = get_cr();	/* get control reg. */
198 	set_cr(reg | CR_M);
199 }
200 
201 static int mmu_enabled(void)
202 {
203 	return get_cr() & CR_M;
204 }
205 
206 /* cache_bit must be either CR_I or CR_C */
207 static void cache_enable(uint32_t cache_bit)
208 {
209 	uint32_t reg;
210 
211 	/* The data cache is not active unless the mmu is enabled too */
212 	if ((cache_bit == CR_C) && !mmu_enabled())
213 		mmu_setup();
214 	reg = get_cr();	/* get control reg. */
215 	set_cr(reg | cache_bit);
216 }
217 
218 /* cache_bit must be either CR_I or CR_C */
219 static void cache_disable(uint32_t cache_bit)
220 {
221 	uint32_t reg;
222 
223 	reg = get_cr();
224 
225 	if (cache_bit == CR_C) {
226 		/* if cache isn;t enabled no need to disable */
227 		if ((reg & CR_C) != CR_C)
228 			return;
229 		/* if disabling data cache, disable mmu too */
230 		cache_bit |= CR_M;
231 	}
232 	reg = get_cr();
233 
234 	if (cache_bit == (CR_C | CR_M))
235 		flush_dcache_all();
236 	set_cr(reg & ~cache_bit);
237 }
238 #endif
239 
240 #ifdef CONFIG_SYS_ICACHE_OFF
241 void icache_enable (void)
242 {
243 	return;
244 }
245 
246 void icache_disable (void)
247 {
248 	return;
249 }
250 
251 int icache_status (void)
252 {
253 	return 0;					/* always off */
254 }
255 #else
256 void icache_enable(void)
257 {
258 	cache_enable(CR_I);
259 }
260 
261 void icache_disable(void)
262 {
263 	cache_disable(CR_I);
264 }
265 
266 int icache_status(void)
267 {
268 	return (get_cr() & CR_I) != 0;
269 }
270 #endif
271 
272 #ifdef CONFIG_SYS_DCACHE_OFF
273 void dcache_enable (void)
274 {
275 	return;
276 }
277 
278 void dcache_disable (void)
279 {
280 	return;
281 }
282 
283 int dcache_status (void)
284 {
285 	return 0;					/* always off */
286 }
287 #else
288 void dcache_enable(void)
289 {
290 	cache_enable(CR_C);
291 }
292 
293 void dcache_disable(void)
294 {
295 	cache_disable(CR_C);
296 }
297 
298 int dcache_status(void)
299 {
300 	return (get_cr() & CR_C) != 0;
301 }
302 #endif
303