xref: /openbmc/u-boot/arch/arm/lib/bootm.c (revision 2399e401) 
1 /* Copyright (C) 2011
2  * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
3  *  - Added prep subcommand support
4  *  - Reorganized source - modeled after powerpc version
5  *
6  * (C) Copyright 2002
7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8  * Marius Groeger <mgroeger@sysgo.de>
9  *
10  * Copyright (C) 2001  Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #include <common.h>
16 #include <command.h>
17 #include <image.h>
18 #include <u-boot/zlib.h>
19 #include <asm/byteorder.h>
20 #include <libfdt.h>
21 #include <mapmem.h>
22 #include <fdt_support.h>
23 #include <asm/bootm.h>
24 #include <asm/secure.h>
25 #include <linux/compiler.h>
26 #include <bootm.h>
27 #include <vxworks.h>
28 
29 #ifdef CONFIG_ARMV7_NONSEC
30 #include <asm/armv7.h>
31 #endif
32 
33 DECLARE_GLOBAL_DATA_PTR;
34 
35 static struct tag *params;
36 
37 static ulong get_sp(void)
38 {
39 	ulong ret;
40 
41 	asm("mov %0, sp" : "=r"(ret) : );
42 	return ret;
43 }
44 
45 void arch_lmb_reserve(struct lmb *lmb)
46 {
47 	ulong sp;
48 
49 	/*
50 	 * Booting a (Linux) kernel image
51 	 *
52 	 * Allocate space for command line and board info - the
53 	 * address should be as high as possible within the reach of
54 	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
55 	 * memory, which means far enough below the current stack
56 	 * pointer.
57 	 */
58 	sp = get_sp();
59 	debug("## Current stack ends at 0x%08lx ", sp);
60 
61 	/* adjust sp by 4K to be safe */
62 	sp -= 4096;
63 	lmb_reserve(lmb, sp,
64 		    gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
65 }
66 
67 __weak void board_quiesce_devices(void)
68 {
69 }
70 
71 /**
72  * announce_and_cleanup() - Print message and prepare for kernel boot
73  *
74  * @fake: non-zero to do everything except actually boot
75  */
76 static void announce_and_cleanup(int fake)
77 {
78 	printf("\nStarting kernel ...%s\n\n", fake ?
79 		"(fake run for tracing)" : "");
80 	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
81 #ifdef CONFIG_BOOTSTAGE_FDT
82 	bootstage_fdt_add_report();
83 #endif
84 #ifdef CONFIG_BOOTSTAGE_REPORT
85 	bootstage_report();
86 #endif
87 
88 #ifdef CONFIG_USB_DEVICE
89 	udc_disconnect();
90 #endif
91 
92 	board_quiesce_devices();
93 
94 	cleanup_before_linux();
95 }
96 
97 static void setup_start_tag (bd_t *bd)
98 {
99 	params = (struct tag *)bd->bi_boot_params;
100 
101 	params->hdr.tag = ATAG_CORE;
102 	params->hdr.size = tag_size (tag_core);
103 
104 	params->u.core.flags = 0;
105 	params->u.core.pagesize = 0;
106 	params->u.core.rootdev = 0;
107 
108 	params = tag_next (params);
109 }
110 
111 static void setup_memory_tags(bd_t *bd)
112 {
113 	int i;
114 
115 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
116 		params->hdr.tag = ATAG_MEM;
117 		params->hdr.size = tag_size (tag_mem32);
118 
119 		params->u.mem.start = bd->bi_dram[i].start;
120 		params->u.mem.size = bd->bi_dram[i].size;
121 
122 		params = tag_next (params);
123 	}
124 }
125 
126 static void setup_commandline_tag(bd_t *bd, char *commandline)
127 {
128 	char *p;
129 
130 	if (!commandline)
131 		return;
132 
133 	/* eat leading white space */
134 	for (p = commandline; *p == ' '; p++);
135 
136 	/* skip non-existent command lines so the kernel will still
137 	 * use its default command line.
138 	 */
139 	if (*p == '\0')
140 		return;
141 
142 	params->hdr.tag = ATAG_CMDLINE;
143 	params->hdr.size =
144 		(sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2;
145 
146 	strcpy (params->u.cmdline.cmdline, p);
147 
148 	params = tag_next (params);
149 }
150 
151 static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end)
152 {
153 	/* an ATAG_INITRD node tells the kernel where the compressed
154 	 * ramdisk can be found. ATAG_RDIMG is a better name, actually.
155 	 */
156 	params->hdr.tag = ATAG_INITRD2;
157 	params->hdr.size = tag_size (tag_initrd);
158 
159 	params->u.initrd.start = initrd_start;
160 	params->u.initrd.size = initrd_end - initrd_start;
161 
162 	params = tag_next (params);
163 }
164 
165 static void setup_serial_tag(struct tag **tmp)
166 {
167 	struct tag *params = *tmp;
168 	struct tag_serialnr serialnr;
169 
170 	get_board_serial(&serialnr);
171 	params->hdr.tag = ATAG_SERIAL;
172 	params->hdr.size = tag_size (tag_serialnr);
173 	params->u.serialnr.low = serialnr.low;
174 	params->u.serialnr.high= serialnr.high;
175 	params = tag_next (params);
176 	*tmp = params;
177 }
178 
179 static void setup_revision_tag(struct tag **in_params)
180 {
181 	u32 rev = 0;
182 
183 	rev = get_board_rev();
184 	params->hdr.tag = ATAG_REVISION;
185 	params->hdr.size = tag_size (tag_revision);
186 	params->u.revision.rev = rev;
187 	params = tag_next (params);
188 }
189 
190 static void setup_end_tag(bd_t *bd)
191 {
192 	params->hdr.tag = ATAG_NONE;
193 	params->hdr.size = 0;
194 }
195 
196 __weak void setup_board_tags(struct tag **in_params) {}
197 
198 #ifdef CONFIG_ARM64
199 static void do_nonsec_virt_switch(void)
200 {
201 	smp_kick_all_cpus();
202 	dcache_disable();	/* flush cache before swtiching to EL2 */
203 }
204 #endif
205 
206 /* Subcommand: PREP */
207 static void boot_prep_linux(bootm_headers_t *images)
208 {
209 	char *commandline = getenv("bootargs");
210 
211 	if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
212 #ifdef CONFIG_OF_LIBFDT
213 		debug("using: FDT\n");
214 		if (image_setup_linux(images)) {
215 			printf("FDT creation failed! hanging...");
216 			hang();
217 		}
218 #endif
219 	} else if (BOOTM_ENABLE_TAGS) {
220 		debug("using: ATAGS\n");
221 		setup_start_tag(gd->bd);
222 		if (BOOTM_ENABLE_SERIAL_TAG)
223 			setup_serial_tag(&params);
224 		if (BOOTM_ENABLE_CMDLINE_TAG)
225 			setup_commandline_tag(gd->bd, commandline);
226 		if (BOOTM_ENABLE_REVISION_TAG)
227 			setup_revision_tag(&params);
228 		if (BOOTM_ENABLE_MEMORY_TAGS)
229 			setup_memory_tags(gd->bd);
230 		if (BOOTM_ENABLE_INITRD_TAG) {
231 			/*
232 			 * In boot_ramdisk_high(), it may relocate ramdisk to
233 			 * a specified location. And set images->initrd_start &
234 			 * images->initrd_end to relocated ramdisk's start/end
235 			 * addresses. So use them instead of images->rd_start &
236 			 * images->rd_end when possible.
237 			 */
238 			if (images->initrd_start && images->initrd_end) {
239 				setup_initrd_tag(gd->bd, images->initrd_start,
240 						 images->initrd_end);
241 			} else if (images->rd_start && images->rd_end) {
242 				setup_initrd_tag(gd->bd, images->rd_start,
243 						 images->rd_end);
244 			}
245 		}
246 		setup_board_tags(&params);
247 		setup_end_tag(gd->bd);
248 	} else {
249 		printf("FDT and ATAGS support not compiled in - hanging\n");
250 		hang();
251 	}
252 }
253 
254 __weak bool armv7_boot_nonsec_default(void)
255 {
256 #ifdef CONFIG_ARMV7_BOOT_SEC_DEFAULT
257 	return false;
258 #else
259 	return true;
260 #endif
261 }
262 
263 #ifdef CONFIG_ARMV7_NONSEC
264 bool armv7_boot_nonsec(void)
265 {
266 	char *s = getenv("bootm_boot_mode");
267 	bool nonsec = armv7_boot_nonsec_default();
268 
269 	if (s && !strcmp(s, "sec"))
270 		nonsec = false;
271 
272 	if (s && !strcmp(s, "nonsec"))
273 		nonsec = true;
274 
275 	return nonsec;
276 }
277 #endif
278 
279 #ifdef CONFIG_ARM64
280 __weak void update_os_arch_secondary_cores(uint8_t os_arch)
281 {
282 }
283 
284 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
285 static void switch_to_el1(void)
286 {
287 	if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
288 	    (images.os.arch == IH_ARCH_ARM))
289 		armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number,
290 				    (u64)images.ft_addr, 0,
291 				    (u64)images.ep,
292 				    ES_TO_AARCH32);
293 	else
294 		armv8_switch_to_el1((u64)images.ft_addr, 0, 0, 0,
295 				    images.ep,
296 				    ES_TO_AARCH64);
297 }
298 #endif
299 #endif
300 
301 /* Subcommand: GO */
302 static void boot_jump_linux(bootm_headers_t *images, int flag)
303 {
304 #ifdef CONFIG_ARM64
305 	void (*kernel_entry)(void *fdt_addr, void *res0, void *res1,
306 			void *res2);
307 	int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
308 
309 	kernel_entry = (void (*)(void *fdt_addr, void *res0, void *res1,
310 				void *res2))images->ep;
311 
312 	debug("## Transferring control to Linux (at address %lx)...\n",
313 		(ulong) kernel_entry);
314 	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
315 
316 	announce_and_cleanup(fake);
317 
318 	if (!fake) {
319 #ifdef CONFIG_ARMV8_PSCI
320 		armv8_setup_psci();
321 #endif
322 		do_nonsec_virt_switch();
323 
324 		update_os_arch_secondary_cores(images->os.arch);
325 
326 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
327 		armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0,
328 				    (u64)switch_to_el1, ES_TO_AARCH64);
329 #else
330 		if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
331 		    (images->os.arch == IH_ARCH_ARM))
332 			armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number,
333 					    (u64)images->ft_addr, 0,
334 					    (u64)images->ep,
335 					    ES_TO_AARCH32);
336 		else
337 			armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0,
338 					    images->ep,
339 					    ES_TO_AARCH64);
340 #endif
341 	}
342 #else
343 	unsigned long machid = gd->bd->bi_arch_number;
344 	char *s;
345 	void (*kernel_entry)(int zero, int arch, uint params);
346 	unsigned long r2;
347 	int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
348 
349 	kernel_entry = (void (*)(int, int, uint))images->ep;
350 
351 	s = getenv("machid");
352 	if (s) {
353 		if (strict_strtoul(s, 16, &machid) < 0) {
354 			debug("strict_strtoul failed!\n");
355 			return;
356 		}
357 		printf("Using machid 0x%lx from environment\n", machid);
358 	}
359 
360 	debug("## Transferring control to Linux (at address %08lx)" \
361 		"...\n", (ulong) kernel_entry);
362 	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
363 	announce_and_cleanup(fake);
364 
365 	if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len)
366 		r2 = (unsigned long)images->ft_addr;
367 	else
368 		r2 = gd->bd->bi_boot_params;
369 
370 	if (!fake) {
371 #ifdef CONFIG_ARMV7_NONSEC
372 		if (armv7_boot_nonsec()) {
373 			armv7_init_nonsec();
374 			secure_ram_addr(_do_nonsec_entry)(kernel_entry,
375 							  0, machid, r2);
376 		} else
377 #endif
378 			kernel_entry(0, machid, r2);
379 	}
380 #endif
381 }
382 
383 /* Main Entry point for arm bootm implementation
384  *
385  * Modeled after the powerpc implementation
386  * DIFFERENCE: Instead of calling prep and go at the end
387  * they are called if subcommand is equal 0.
388  */
389 int do_bootm_linux(int flag, int argc, char * const argv[],
390 		   bootm_headers_t *images)
391 {
392 	/* No need for those on ARM */
393 	if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE)
394 		return -1;
395 
396 	if (flag & BOOTM_STATE_OS_PREP) {
397 		boot_prep_linux(images);
398 		return 0;
399 	}
400 
401 	if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
402 		boot_jump_linux(images, flag);
403 		return 0;
404 	}
405 
406 	boot_prep_linux(images);
407 	boot_jump_linux(images, flag);
408 	return 0;
409 }
410 
411 #if defined(CONFIG_BOOTM_VXWORKS)
412 void boot_prep_vxworks(bootm_headers_t *images)
413 {
414 #if defined(CONFIG_OF_LIBFDT)
415 	int off;
416 
417 	if (images->ft_addr) {
418 		off = fdt_path_offset(images->ft_addr, "/memory");
419 		if (off < 0) {
420 			if (arch_fixup_fdt(images->ft_addr))
421 				puts("## WARNING: fixup memory failed!\n");
422 		}
423 	}
424 #endif
425 	cleanup_before_linux();
426 }
427 void boot_jump_vxworks(bootm_headers_t *images)
428 {
429 	/* ARM VxWorks requires device tree physical address to be passed */
430 	((void (*)(void *))images->ep)(images->ft_addr);
431 }
432 #endif
433