xref: /openbmc/u-boot/arch/arm/include/asm/system.h (revision 730d2544)
1 #ifndef __ASM_ARM_SYSTEM_H
2 #define __ASM_ARM_SYSTEM_H
3 
4 #include <common.h>
5 #include <linux/compiler.h>
6 #include <asm/barriers.h>
7 
8 #ifdef CONFIG_ARM64
9 
10 /*
11  * SCTLR_EL1/SCTLR_EL2/SCTLR_EL3 bits definitions
12  */
13 #define CR_M		(1 << 0)	/* MMU enable			*/
14 #define CR_A		(1 << 1)	/* Alignment abort enable	*/
15 #define CR_C		(1 << 2)	/* Dcache enable		*/
16 #define CR_SA		(1 << 3)	/* Stack Alignment Check Enable	*/
17 #define CR_I		(1 << 12)	/* Icache enable		*/
18 #define CR_WXN		(1 << 19)	/* Write Permision Imply XN	*/
19 #define CR_EE		(1 << 25)	/* Exception (Big) Endian	*/
20 
21 #define ES_TO_AARCH64		1
22 #define ES_TO_AARCH32		0
23 
24 /*
25  * SCR_EL3 bits definitions
26  */
27 #define SCR_EL3_RW_AARCH64	(1 << 10) /* Next lower level is AArch64     */
28 #define SCR_EL3_RW_AARCH32	(0 << 10) /* Lower lowers level are AArch32  */
29 #define SCR_EL3_HCE_EN		(1 << 8)  /* Hypervisor Call enable          */
30 #define SCR_EL3_SMD_DIS		(1 << 7)  /* Secure Monitor Call disable     */
31 #define SCR_EL3_RES1		(3 << 4)  /* Reserved, RES1                  */
32 #define SCR_EL3_NS_EN		(1 << 0)  /* EL0 and EL1 in Non-scure state  */
33 
34 /*
35  * SPSR_EL3/SPSR_EL2 bits definitions
36  */
37 #define SPSR_EL_END_LE		(0 << 9)  /* Exception Little-endian          */
38 #define SPSR_EL_DEBUG_MASK	(1 << 9)  /* Debug exception masked           */
39 #define SPSR_EL_ASYN_MASK	(1 << 8)  /* Asynchronous data abort masked   */
40 #define SPSR_EL_SERR_MASK	(1 << 8)  /* System Error exception masked    */
41 #define SPSR_EL_IRQ_MASK	(1 << 7)  /* IRQ exception masked             */
42 #define SPSR_EL_FIQ_MASK	(1 << 6)  /* FIQ exception masked             */
43 #define SPSR_EL_T_A32		(0 << 5)  /* AArch32 instruction set A32      */
44 #define SPSR_EL_M_AARCH64	(0 << 4)  /* Exception taken from AArch64     */
45 #define SPSR_EL_M_AARCH32	(1 << 4)  /* Exception taken from AArch32     */
46 #define SPSR_EL_M_SVC		(0x3)     /* Exception taken from SVC mode    */
47 #define SPSR_EL_M_HYP		(0xa)     /* Exception taken from HYP mode    */
48 #define SPSR_EL_M_EL1H		(5)       /* Exception taken from EL1h mode   */
49 #define SPSR_EL_M_EL2H		(9)       /* Exception taken from EL2h mode   */
50 
51 /*
52  * CPTR_EL2 bits definitions
53  */
54 #define CPTR_EL2_RES1		(3 << 12 | 0x3ff)           /* Reserved, RES1 */
55 
56 /*
57  * SCTLR_EL2 bits definitions
58  */
59 #define SCTLR_EL2_RES1		(3 << 28 | 3 << 22 | 1 << 18 | 1 << 16 |\
60 				 1 << 11 | 3 << 4)	    /* Reserved, RES1 */
61 #define SCTLR_EL2_EE_LE		(0 << 25) /* Exception Little-endian          */
62 #define SCTLR_EL2_WXN_DIS	(0 << 19) /* Write permission is not XN       */
63 #define SCTLR_EL2_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
64 #define SCTLR_EL2_SA_DIS	(0 << 3)  /* Stack Alignment Check disabled   */
65 #define SCTLR_EL2_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
66 #define SCTLR_EL2_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
67 #define SCTLR_EL2_MMU_DIS	(0)       /* MMU disabled                     */
68 
69 /*
70  * CNTHCTL_EL2 bits definitions
71  */
72 #define CNTHCTL_EL2_EL1PCEN_EN	(1 << 1)  /* Physical timer regs accessible   */
73 #define CNTHCTL_EL2_EL1PCTEN_EN	(1 << 0)  /* Physical counter accessible      */
74 
75 /*
76  * HCR_EL2 bits definitions
77  */
78 #define HCR_EL2_RW_AARCH64	(1 << 31) /* EL1 is AArch64                   */
79 #define HCR_EL2_RW_AARCH32	(0 << 31) /* Lower levels are AArch32         */
80 #define HCR_EL2_HCD_DIS		(1 << 29) /* Hypervisor Call disabled         */
81 
82 /*
83  * CPACR_EL1 bits definitions
84  */
85 #define CPACR_EL1_FPEN_EN	(3 << 20) /* SIMD and FP instruction enabled  */
86 
87 /*
88  * SCTLR_EL1 bits definitions
89  */
90 #define SCTLR_EL1_RES1		(3 << 28 | 3 << 22 | 1 << 20 |\
91 				 1 << 11) /* Reserved, RES1                   */
92 #define SCTLR_EL1_UCI_DIS	(0 << 26) /* Cache instruction disabled       */
93 #define SCTLR_EL1_EE_LE		(0 << 25) /* Exception Little-endian          */
94 #define SCTLR_EL1_WXN_DIS	(0 << 19) /* Write permission is not XN       */
95 #define SCTLR_EL1_NTWE_DIS	(0 << 18) /* WFE instruction disabled         */
96 #define SCTLR_EL1_NTWI_DIS	(0 << 16) /* WFI instruction disabled         */
97 #define SCTLR_EL1_UCT_DIS	(0 << 15) /* CTR_EL0 access disabled          */
98 #define SCTLR_EL1_DZE_DIS	(0 << 14) /* DC ZVA instruction disabled      */
99 #define SCTLR_EL1_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
100 #define SCTLR_EL1_UMA_DIS	(0 << 9)  /* User Mask Access disabled        */
101 #define SCTLR_EL1_SED_EN	(0 << 8)  /* SETEND instruction enabled       */
102 #define SCTLR_EL1_ITD_EN	(0 << 7)  /* IT instruction enabled           */
103 #define SCTLR_EL1_CP15BEN_DIS	(0 << 5)  /* CP15 barrier operation disabled  */
104 #define SCTLR_EL1_SA0_DIS	(0 << 4)  /* Stack Alignment EL0 disabled     */
105 #define SCTLR_EL1_SA_DIS	(0 << 3)  /* Stack Alignment EL1 disabled     */
106 #define SCTLR_EL1_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
107 #define SCTLR_EL1_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
108 #define SCTLR_EL1_MMU_DIS	(0)       /* MMU disabled                     */
109 
110 #ifndef __ASSEMBLY__
111 
112 u64 get_page_table_size(void);
113 #define PGTABLE_SIZE	get_page_table_size()
114 
115 /* 2MB granularity */
116 #define MMU_SECTION_SHIFT	21
117 #define MMU_SECTION_SIZE	(1 << MMU_SECTION_SHIFT)
118 
119 /* These constants need to be synced to the MT_ types in asm/armv8/mmu.h */
120 enum dcache_option {
121 	DCACHE_OFF = 0 << 2,
122 	DCACHE_WRITETHROUGH = 3 << 2,
123 	DCACHE_WRITEBACK = 4 << 2,
124 	DCACHE_WRITEALLOC = 4 << 2,
125 };
126 
127 #define wfi()				\
128 	({asm volatile(			\
129 	"wfi" : : : "memory");		\
130 	})
131 
132 static inline unsigned int current_el(void)
133 {
134 	unsigned int el;
135 	asm volatile("mrs %0, CurrentEL" : "=r" (el) : : "cc");
136 	return el >> 2;
137 }
138 
139 static inline unsigned int get_sctlr(void)
140 {
141 	unsigned int el, val;
142 
143 	el = current_el();
144 	if (el == 1)
145 		asm volatile("mrs %0, sctlr_el1" : "=r" (val) : : "cc");
146 	else if (el == 2)
147 		asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
148 	else
149 		asm volatile("mrs %0, sctlr_el3" : "=r" (val) : : "cc");
150 
151 	return val;
152 }
153 
154 static inline void set_sctlr(unsigned int val)
155 {
156 	unsigned int el;
157 
158 	el = current_el();
159 	if (el == 1)
160 		asm volatile("msr sctlr_el1, %0" : : "r" (val) : "cc");
161 	else if (el == 2)
162 		asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
163 	else
164 		asm volatile("msr sctlr_el3, %0" : : "r" (val) : "cc");
165 
166 	asm volatile("isb");
167 }
168 
169 static inline unsigned long read_mpidr(void)
170 {
171 	unsigned long val;
172 
173 	asm volatile("mrs %0, mpidr_el1" : "=r" (val));
174 
175 	return val;
176 }
177 
178 #define BSP_COREID	0
179 
180 void __asm_flush_dcache_all(void);
181 void __asm_invalidate_dcache_all(void);
182 void __asm_flush_dcache_range(u64 start, u64 end);
183 void __asm_invalidate_tlb_all(void);
184 void __asm_invalidate_icache_all(void);
185 int __asm_invalidate_l3_dcache(void);
186 int __asm_flush_l3_dcache(void);
187 int __asm_invalidate_l3_icache(void);
188 void __asm_switch_ttbr(u64 new_ttbr);
189 
190 /*
191  * Switch from EL3 to EL2 for ARMv8
192  *
193  * @args:        For loading 64-bit OS, fdt address.
194  *               For loading 32-bit OS, zero.
195  * @mach_nr:     For loading 64-bit OS, zero.
196  *               For loading 32-bit OS, machine nr
197  * @fdt_addr:    For loading 64-bit OS, zero.
198  *               For loading 32-bit OS, fdt address.
199  * @entry_point: kernel entry point
200  * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
201  */
202 void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
203 			 u64 entry_point, u64 es_flag);
204 /*
205  * Switch from EL2 to EL1 for ARMv8
206  *
207  * @args:        For loading 64-bit OS, fdt address.
208  *               For loading 32-bit OS, zero.
209  * @mach_nr:     For loading 64-bit OS, zero.
210  *               For loading 32-bit OS, machine nr
211  * @fdt_addr:    For loading 64-bit OS, zero.
212  *               For loading 32-bit OS, fdt address.
213  * @entry_point: kernel entry point
214  * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
215  */
216 void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
217 			 u64 entry_point, u64 es_flag);
218 void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
219 			  u64 entry_point);
220 void gic_init(void);
221 void gic_send_sgi(unsigned long sgino);
222 void wait_for_wakeup(void);
223 void protect_secure_region(void);
224 void smp_kick_all_cpus(void);
225 
226 void flush_l3_cache(void);
227 
228 /*
229  *Issue a secure monitor call in accordance with ARM "SMC Calling convention",
230  * DEN0028A
231  *
232  * @args: input and output arguments
233  *
234  */
235 void smc_call(struct pt_regs *args);
236 
237 void __noreturn psci_system_reset(void);
238 void __noreturn psci_system_off(void);
239 
240 #endif	/* __ASSEMBLY__ */
241 
242 #else /* CONFIG_ARM64 */
243 
244 #ifdef __KERNEL__
245 
246 #define CPU_ARCH_UNKNOWN	0
247 #define CPU_ARCH_ARMv3		1
248 #define CPU_ARCH_ARMv4		2
249 #define CPU_ARCH_ARMv4T		3
250 #define CPU_ARCH_ARMv5		4
251 #define CPU_ARCH_ARMv5T		5
252 #define CPU_ARCH_ARMv5TE	6
253 #define CPU_ARCH_ARMv5TEJ	7
254 #define CPU_ARCH_ARMv6		8
255 #define CPU_ARCH_ARMv7		9
256 
257 /*
258  * CR1 bits (CP#15 CR1)
259  */
260 #define CR_M	(1 << 0)	/* MMU enable				*/
261 #define CR_A	(1 << 1)	/* Alignment abort enable		*/
262 #define CR_C	(1 << 2)	/* Dcache enable			*/
263 #define CR_W	(1 << 3)	/* Write buffer enable			*/
264 #define CR_P	(1 << 4)	/* 32-bit exception handler		*/
265 #define CR_D	(1 << 5)	/* 32-bit data address range		*/
266 #define CR_L	(1 << 6)	/* Implementation defined		*/
267 #define CR_B	(1 << 7)	/* Big endian				*/
268 #define CR_S	(1 << 8)	/* System MMU protection		*/
269 #define CR_R	(1 << 9)	/* ROM MMU protection			*/
270 #define CR_F	(1 << 10)	/* Implementation defined		*/
271 #define CR_Z	(1 << 11)	/* Implementation defined		*/
272 #define CR_I	(1 << 12)	/* Icache enable			*/
273 #define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
274 #define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
275 #define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
276 #define CR_DT	(1 << 16)
277 #define CR_IT	(1 << 18)
278 #define CR_ST	(1 << 19)
279 #define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
280 #define CR_U	(1 << 22)	/* Unaligned access operation		*/
281 #define CR_XP	(1 << 23)	/* Extended page tables			*/
282 #define CR_VE	(1 << 24)	/* Vectored interrupts			*/
283 #define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
284 #define CR_TRE	(1 << 28)	/* TEX remap enable			*/
285 #define CR_AFE	(1 << 29)	/* Access flag enable			*/
286 #define CR_TE	(1 << 30)	/* Thumb exception enable		*/
287 
288 #if defined(CONFIG_ARMV7_LPAE) && !defined(PGTABLE_SIZE)
289 #define PGTABLE_SIZE		(4096 * 5)
290 #elif !defined(PGTABLE_SIZE)
291 #define PGTABLE_SIZE		(4096 * 4)
292 #endif
293 
294 /*
295  * This is used to ensure the compiler did actually allocate the register we
296  * asked it for some inline assembly sequences.  Apparently we can't trust
297  * the compiler from one version to another so a bit of paranoia won't hurt.
298  * This string is meant to be concatenated with the inline asm string and
299  * will cause compilation to stop on mismatch.
300  * (for details, see gcc PR 15089)
301  */
302 #define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
303 
304 #ifndef __ASSEMBLY__
305 
306 /**
307  * save_boot_params() - Save boot parameters before starting reset sequence
308  *
309  * If you provide this function it will be called immediately U-Boot starts,
310  * both for SPL and U-Boot proper.
311  *
312  * All registers are unchanged from U-Boot entry. No registers need be
313  * preserved.
314  *
315  * This is not a normal C function. There is no stack. Return by branching to
316  * save_boot_params_ret.
317  *
318  * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
319  */
320 
321 /**
322  * save_boot_params_ret() - Return from save_boot_params()
323  *
324  * If you provide save_boot_params(), then you should jump back to this
325  * function when done. Try to preserve all registers.
326  *
327  * If your implementation of save_boot_params() is in C then it is acceptable
328  * to simply call save_boot_params_ret() at the end of your function. Since
329  * there is no link register set up, you cannot just exit the function. U-Boot
330  * will return to the (initialised) value of lr, and likely crash/hang.
331  *
332  * If your implementation of save_boot_params() is in assembler then you
333  * should use 'b' or 'bx' to return to save_boot_params_ret.
334  */
335 void save_boot_params_ret(void);
336 
337 #ifdef CONFIG_ARMV7_LPAE
338 void switch_to_hypervisor_ret(void);
339 #endif
340 
341 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
342 
343 #ifdef __ARM_ARCH_7A__
344 #define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
345 #else
346 #define wfi()
347 #endif
348 
349 static inline unsigned long get_cpsr(void)
350 {
351 	unsigned long cpsr;
352 
353 	asm volatile("mrs %0, cpsr" : "=r"(cpsr): );
354 	return cpsr;
355 }
356 
357 static inline int is_hyp(void)
358 {
359 #ifdef CONFIG_ARMV7_LPAE
360 	/* HYP mode requires LPAE ... */
361 	return ((get_cpsr() & 0x1f) == 0x1a);
362 #else
363 	/* ... so without LPAE support we can optimize all hyp code away */
364 	return 0;
365 #endif
366 }
367 
368 static inline unsigned int get_cr(void)
369 {
370 	unsigned int val;
371 
372 	if (is_hyp())
373 		asm volatile("mrc p15, 4, %0, c1, c0, 0	@ get CR" : "=r" (val)
374 								  :
375 								  : "cc");
376 	else
377 		asm volatile("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val)
378 								  :
379 								  : "cc");
380 	return val;
381 }
382 
383 static inline void set_cr(unsigned int val)
384 {
385 	if (is_hyp())
386 		asm volatile("mcr p15, 4, %0, c1, c0, 0	@ set CR" :
387 								  : "r" (val)
388 								  : "cc");
389 	else
390 		asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR" :
391 								  : "r" (val)
392 								  : "cc");
393 	isb();
394 }
395 
396 static inline unsigned int get_dacr(void)
397 {
398 	unsigned int val;
399 	asm("mrc p15, 0, %0, c3, c0, 0	@ get DACR" : "=r" (val) : : "cc");
400 	return val;
401 }
402 
403 static inline void set_dacr(unsigned int val)
404 {
405 	asm volatile("mcr p15, 0, %0, c3, c0, 0	@ set DACR"
406 	  : : "r" (val) : "cc");
407 	isb();
408 }
409 
410 #ifdef CONFIG_ARMV7_LPAE
411 /* Long-Descriptor Translation Table Level 1/2 Bits */
412 #define TTB_SECT_XN_MASK	(1ULL << 54)
413 #define TTB_SECT_NG_MASK	(1 << 11)
414 #define TTB_SECT_AF		(1 << 10)
415 #define TTB_SECT_SH_MASK	(3 << 8)
416 #define TTB_SECT_NS_MASK	(1 << 5)
417 #define TTB_SECT_AP		(1 << 6)
418 /* Note: TTB AP bits are set elsewhere */
419 #define TTB_SECT_MAIR(x)	((x & 0x7) << 2) /* Index into MAIR */
420 #define TTB_SECT		(1 << 0)
421 #define TTB_PAGETABLE		(3 << 0)
422 
423 /* TTBCR flags */
424 #define TTBCR_EAE		(1 << 31)
425 #define TTBCR_T0SZ(x)		((x) << 0)
426 #define TTBCR_T1SZ(x)		((x) << 16)
427 #define TTBCR_USING_TTBR0	(TTBCR_T0SZ(0) | TTBCR_T1SZ(0))
428 #define TTBCR_IRGN0_NC		(0 << 8)
429 #define TTBCR_IRGN0_WBWA	(1 << 8)
430 #define TTBCR_IRGN0_WT		(2 << 8)
431 #define TTBCR_IRGN0_WBNWA	(3 << 8)
432 #define TTBCR_IRGN0_MASK	(3 << 8)
433 #define TTBCR_ORGN0_NC		(0 << 10)
434 #define TTBCR_ORGN0_WBWA	(1 << 10)
435 #define TTBCR_ORGN0_WT		(2 << 10)
436 #define TTBCR_ORGN0_WBNWA	(3 << 10)
437 #define TTBCR_ORGN0_MASK	(3 << 10)
438 #define TTBCR_SHARED_NON	(0 << 12)
439 #define TTBCR_SHARED_OUTER	(2 << 12)
440 #define TTBCR_SHARED_INNER	(3 << 12)
441 #define TTBCR_EPD0		(0 << 7)
442 
443 /*
444  * Memory types
445  */
446 #define MEMORY_ATTRIBUTES	((0x00 << (0 * 8)) | (0x88 << (1 * 8)) | \
447 				 (0xcc << (2 * 8)) | (0xff << (3 * 8)))
448 
449 /* options available for data cache on each page */
450 enum dcache_option {
451 	DCACHE_OFF = TTB_SECT | TTB_SECT_MAIR(0) | TTB_SECT_XN_MASK,
452 	DCACHE_WRITETHROUGH = TTB_SECT | TTB_SECT_MAIR(1),
453 	DCACHE_WRITEBACK = TTB_SECT | TTB_SECT_MAIR(2),
454 	DCACHE_WRITEALLOC = TTB_SECT | TTB_SECT_MAIR(3),
455 };
456 #elif defined(CONFIG_CPU_V7)
457 /* Short-Descriptor Translation Table Level 1 Bits */
458 #define TTB_SECT_NS_MASK	(1 << 19)
459 #define TTB_SECT_NG_MASK	(1 << 17)
460 #define TTB_SECT_S_MASK		(1 << 16)
461 /* Note: TTB AP bits are set elsewhere */
462 #define TTB_SECT_AP		(3 << 10)
463 #define TTB_SECT_TEX(x)		((x & 0x7) << 12)
464 #define TTB_SECT_DOMAIN(x)	((x & 0xf) << 5)
465 #define TTB_SECT_XN_MASK	(1 << 4)
466 #define TTB_SECT_C_MASK		(1 << 3)
467 #define TTB_SECT_B_MASK		(1 << 2)
468 #define TTB_SECT			(2 << 0)
469 
470 /* options available for data cache on each page */
471 enum dcache_option {
472 	DCACHE_OFF = TTB_SECT_DOMAIN(0) | TTB_SECT_XN_MASK | TTB_SECT,
473 	DCACHE_WRITETHROUGH = DCACHE_OFF | TTB_SECT_C_MASK,
474 	DCACHE_WRITEBACK = DCACHE_WRITETHROUGH | TTB_SECT_B_MASK,
475 	DCACHE_WRITEALLOC = DCACHE_WRITEBACK | TTB_SECT_TEX(1),
476 };
477 #else
478 #define TTB_SECT_AP		(3 << 10)
479 /* options available for data cache on each page */
480 enum dcache_option {
481 	DCACHE_OFF = 0x12,
482 	DCACHE_WRITETHROUGH = 0x1a,
483 	DCACHE_WRITEBACK = 0x1e,
484 	DCACHE_WRITEALLOC = 0x16,
485 };
486 #endif
487 
488 /* Size of an MMU section */
489 enum {
490 #ifdef CONFIG_ARMV7_LPAE
491 	MMU_SECTION_SHIFT	= 21, /* 2MB */
492 #else
493 	MMU_SECTION_SHIFT	= 20, /* 1MB */
494 #endif
495 	MMU_SECTION_SIZE	= 1 << MMU_SECTION_SHIFT,
496 };
497 
498 #ifdef CONFIG_CPU_V7
499 /* TTBR0 bits */
500 #define TTBR0_BASE_ADDR_MASK	0xFFFFC000
501 #define TTBR0_RGN_NC			(0 << 3)
502 #define TTBR0_RGN_WBWA			(1 << 3)
503 #define TTBR0_RGN_WT			(2 << 3)
504 #define TTBR0_RGN_WB			(3 << 3)
505 /* TTBR0[6] is IRGN[0] and TTBR[0] is IRGN[1] */
506 #define TTBR0_IRGN_NC			(0 << 0 | 0 << 6)
507 #define TTBR0_IRGN_WBWA			(0 << 0 | 1 << 6)
508 #define TTBR0_IRGN_WT			(1 << 0 | 0 << 6)
509 #define TTBR0_IRGN_WB			(1 << 0 | 1 << 6)
510 #endif
511 
512 /**
513  * Register an update to the page tables, and flush the TLB
514  *
515  * \param start		start address of update in page table
516  * \param stop		stop address of update in page table
517  */
518 void mmu_page_table_flush(unsigned long start, unsigned long stop);
519 
520 #endif /* __ASSEMBLY__ */
521 
522 #define arch_align_stack(x) (x)
523 
524 #endif /* __KERNEL__ */
525 
526 #endif /* CONFIG_ARM64 */
527 
528 #ifndef __ASSEMBLY__
529 /**
530  * Change the cache settings for a region.
531  *
532  * \param start		start address of memory region to change
533  * \param size		size of memory region to change
534  * \param option	dcache option to select
535  */
536 void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
537 				     enum dcache_option option);
538 
539 #ifdef CONFIG_SYS_NONCACHED_MEMORY
540 void noncached_init(void);
541 phys_addr_t noncached_alloc(size_t size, size_t align);
542 #endif /* CONFIG_SYS_NONCACHED_MEMORY */
543 
544 #endif /* __ASSEMBLY__ */
545 
546 #endif
547