1 /* 2 * Based on Linux i.MX iomux-v3.h file: 3 * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, 4 * <armlinux@phytec.de> 5 * 6 * Copyright (C) 2011 Freescale Semiconductor, Inc. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __MACH_IOMUX_V3_H__ 12 #define __MACH_IOMUX_V3_H__ 13 14 #include <common.h> 15 16 /* 17 * build IOMUX_PAD structure 18 * 19 * This iomux scheme is based around pads, which are the physical balls 20 * on the processor. 21 * 22 * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls 23 * things like driving strength and pullup/pulldown. 24 * - Each pad can have but not necessarily does have an output routing register 25 * (IOMUXC_SW_MUX_CTL_PAD_x). 26 * - Each pad can have but not necessarily does have an input routing register 27 * (IOMUXC_x_SELECT_INPUT) 28 * 29 * The three register sets do not have a fixed offset to each other, 30 * hence we order this table by pad control registers (which all pads 31 * have) and put the optional i/o routing registers into additional 32 * fields. 33 * 34 * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode> 35 * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> 36 * 37 * IOMUX/PAD Bit field definitions 38 * 39 * MUX_CTRL_OFS: 0..11 (12) 40 * PAD_CTRL_OFS: 12..23 (12) 41 * SEL_INPUT_OFS: 24..35 (12) 42 * MUX_MODE + SION + LPSR: 36..41 (6) 43 * PAD_CTRL + NO_PAD_CTRL: 42..59 (18) 44 * SEL_INP: 60..63 (4) 45 */ 46 47 typedef u64 iomux_v3_cfg_t; 48 49 #define MUX_CTRL_OFS_SHIFT 0 50 #define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT) 51 #define MUX_PAD_CTRL_OFS_SHIFT 12 52 #define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << \ 53 MUX_PAD_CTRL_OFS_SHIFT) 54 #define MUX_SEL_INPUT_OFS_SHIFT 24 55 #define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << \ 56 MUX_SEL_INPUT_OFS_SHIFT) 57 58 #define MUX_MODE_SHIFT 36 59 #define MUX_MODE_MASK ((iomux_v3_cfg_t)0x3f << MUX_MODE_SHIFT) 60 #define MUX_PAD_CTRL_SHIFT 42 61 #define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT) 62 #define MUX_SEL_INPUT_SHIFT 60 63 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) 64 65 #define MUX_MODE_SION ((iomux_v3_cfg_t)IOMUX_CONFIG_SION << \ 66 MUX_MODE_SHIFT) 67 #define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) 68 69 #define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \ 70 sel_input, pad_ctrl) \ 71 (((iomux_v3_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \ 72 ((iomux_v3_cfg_t)(mux_mode) << MUX_MODE_SHIFT) | \ 73 ((iomux_v3_cfg_t)(pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \ 74 ((iomux_v3_cfg_t)(pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \ 75 ((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \ 76 ((iomux_v3_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT)) 77 78 #define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \ 79 MUX_PAD_CTRL(pad)) 80 81 #define __NA_ 0x000 82 #define NO_MUX_I 0 83 #define NO_PAD_I 0 84 85 #define NO_PAD_CTRL (1 << 17) 86 87 #define IOMUX_CONFIG_LPSR 0x20 88 #define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \ 89 MUX_MODE_SHIFT) 90 #ifdef CONFIG_MX7 91 92 #define IOMUX_LPSR_SEL_INPUT_OFS 0x70000 93 94 #define PAD_CTL_DSE_1P8V_140OHM (0x0<<0) 95 #define PAD_CTL_DSE_1P8V_35OHM (0x1<<0) 96 #define PAD_CTL_DSE_1P8V_70OHM (0x2<<0) 97 #define PAD_CTL_DSE_1P8V_23OHM (0x3<<0) 98 99 #define PAD_CTL_DSE_3P3V_196OHM (0x0<<0) 100 #define PAD_CTL_DSE_3P3V_49OHM (0x1<<0) 101 #define PAD_CTL_DSE_3P3V_98OHM (0x2<<0) 102 #define PAD_CTL_DSE_3P3V_32OHM (0x3<<0) 103 104 #define PAD_CTL_SRE_FAST (0 << 2) 105 #define PAD_CTL_SRE_SLOW (0x1 << 2) 106 107 #define PAD_CTL_HYS (0x1 << 3) 108 #define PAD_CTL_PUE (0x1 << 4) 109 110 #define PAD_CTL_PUS_PD100KOHM ((0x0 << 5) | PAD_CTL_PUE) 111 #define PAD_CTL_PUS_PU5KOHM ((0x1 << 5) | PAD_CTL_PUE) 112 #define PAD_CTL_PUS_PU47KOHM ((0x2 << 5) | PAD_CTL_PUE) 113 #define PAD_CTL_PUS_PU100KOHM ((0x3 << 5) | PAD_CTL_PUE) 114 115 #else 116 117 #ifdef CONFIG_MX6 118 119 #define PAD_CTL_HYS (1 << 16) 120 121 #define PAD_CTL_PUS_100K_DOWN (0 << 14 | PAD_CTL_PUE) 122 #define PAD_CTL_PUS_47K_UP (1 << 14 | PAD_CTL_PUE) 123 #define PAD_CTL_PUS_100K_UP (2 << 14 | PAD_CTL_PUE) 124 #define PAD_CTL_PUS_22K_UP (3 << 14 | PAD_CTL_PUE) 125 #define PAD_CTL_PUE (1 << 13 | PAD_CTL_PKE) 126 #define PAD_CTL_PKE (1 << 12) 127 128 #define PAD_CTL_ODE (1 << 11) 129 130 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) 131 #define PAD_CTL_SPEED_LOW (0 << 6) 132 #else 133 #define PAD_CTL_SPEED_LOW (1 << 6) 134 #endif 135 #define PAD_CTL_SPEED_MED (2 << 6) 136 #define PAD_CTL_SPEED_HIGH (3 << 6) 137 138 #define PAD_CTL_DSE_DISABLE (0 << 3) 139 #define PAD_CTL_DSE_240ohm (1 << 3) 140 #define PAD_CTL_DSE_120ohm (2 << 3) 141 #define PAD_CTL_DSE_80ohm (3 << 3) 142 #define PAD_CTL_DSE_60ohm (4 << 3) 143 #define PAD_CTL_DSE_48ohm (5 << 3) 144 #define PAD_CTL_DSE_40ohm (6 << 3) 145 #define PAD_CTL_DSE_34ohm (7 << 3) 146 147 /* i.MX6SL/SLL */ 148 #define PAD_CTL_LVE (1 << 1) 149 #define PAD_CTL_LVE_BIT (1 << 22) 150 151 /* i.MX6SLL */ 152 #define PAD_CTL_IPD_BIT (1 << 27) 153 154 #elif defined(CONFIG_VF610) 155 156 #define PAD_MUX_MODE_SHIFT 20 157 158 #define PAD_CTL_INPUT_DIFFERENTIAL (1 << 16) 159 160 #define PAD_CTL_SPEED_MED (1 << 12) 161 #define PAD_CTL_SPEED_HIGH (3 << 12) 162 163 #define PAD_CTL_SRE (1 << 11) 164 165 #define PAD_CTL_ODE (1 << 10) 166 167 #define PAD_CTL_DSE_150ohm (1 << 6) 168 #define PAD_CTL_DSE_75ohm (2 << 6) 169 #define PAD_CTL_DSE_50ohm (3 << 6) 170 #define PAD_CTL_DSE_37ohm (4 << 6) 171 #define PAD_CTL_DSE_30ohm (5 << 6) 172 #define PAD_CTL_DSE_25ohm (6 << 6) 173 #define PAD_CTL_DSE_20ohm (7 << 6) 174 175 #define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) 176 #define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) 177 #define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) 178 #define PAD_CTL_PKE (1 << 3) 179 #define PAD_CTL_PUE (1 << 2 | PAD_CTL_PKE) 180 181 #define PAD_CTL_OBE_IBE_ENABLE (3 << 0) 182 #define PAD_CTL_OBE_ENABLE (1 << 1) 183 #define PAD_CTL_IBE_ENABLE (1 << 0) 184 185 #else 186 187 #define PAD_CTL_DVS (1 << 13) 188 #define PAD_CTL_INPUT_DDR (1 << 9) 189 #define PAD_CTL_HYS (1 << 8) 190 191 #define PAD_CTL_PKE (1 << 7) 192 #define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) 193 #define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) 194 #define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) 195 #define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) 196 #define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) 197 198 #define PAD_CTL_ODE (1 << 3) 199 200 #define PAD_CTL_DSE_LOW (0 << 1) 201 #define PAD_CTL_DSE_MED (1 << 1) 202 #define PAD_CTL_DSE_HIGH (2 << 1) 203 #define PAD_CTL_DSE_MAX (3 << 1) 204 205 #endif 206 207 #define PAD_CTL_SRE_SLOW (0 << 0) 208 #define PAD_CTL_SRE_FAST (1 << 0) 209 210 #endif 211 212 #define IOMUX_CONFIG_SION 0x10 213 214 #define GPIO_PIN_MASK 0x1f 215 #define GPIO_PORT_SHIFT 5 216 #define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) 217 #define GPIO_PORTA (0 << GPIO_PORT_SHIFT) 218 #define GPIO_PORTB (1 << GPIO_PORT_SHIFT) 219 #define GPIO_PORTC (2 << GPIO_PORT_SHIFT) 220 #define GPIO_PORTD (3 << GPIO_PORT_SHIFT) 221 #define GPIO_PORTE (4 << GPIO_PORT_SHIFT) 222 #define GPIO_PORTF (5 << GPIO_PORT_SHIFT) 223 224 void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); 225 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, 226 unsigned count); 227 /* 228 * Set bits for general purpose registers 229 */ 230 void imx_iomux_set_gpr_register(int group, int start_bit, 231 int num_bits, int value); 232 #ifdef CONFIG_IOMUX_SHARE_CONF_REG 233 void imx_iomux_gpio_set_direction(unsigned int gpio, 234 unsigned int direction); 235 void imx_iomux_gpio_get_function(unsigned int gpio, 236 u32 *gpio_state); 237 #endif 238 239 /* macros for declaring and using pinmux array */ 240 #if defined(CONFIG_MX6QDL) 241 #define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x) 242 #define SETUP_IOMUX_PAD(def) \ 243 if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { \ 244 imx_iomux_v3_setup_pad(MX6Q_##def); \ 245 } else { \ 246 imx_iomux_v3_setup_pad(MX6DL_##def); \ 247 } 248 #define SETUP_IOMUX_PADS(x) \ 249 imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2) 250 #elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) 251 #define IOMUX_PADS(x) MX6Q_##x 252 #define SETUP_IOMUX_PAD(def) \ 253 imx_iomux_v3_setup_pad(MX6Q_##def); 254 #define SETUP_IOMUX_PADS(x) \ 255 imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)) 256 #elif defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) 257 #define IOMUX_PADS(x) MX6_##x 258 #define SETUP_IOMUX_PAD(def) \ 259 imx_iomux_v3_setup_pad(MX6_##def); 260 #define SETUP_IOMUX_PADS(x) \ 261 imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)) 262 #else 263 #define IOMUX_PADS(x) MX6DL_##x 264 #define SETUP_IOMUX_PAD(def) \ 265 imx_iomux_v3_setup_pad(MX6DL_##def); 266 #define SETUP_IOMUX_PADS(x) \ 267 imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)) 268 #endif 269 270 #endif /* __MACH_IOMUX_V3_H__*/ 271