xref: /openbmc/u-boot/arch/arm/include/asm/cache.h (revision 06feb5d0)
1 /*
2  * (C) Copyright 2009
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef _ASM_CACHE_H
10 #define _ASM_CACHE_H
11 
12 #include <asm/system.h>
13 
14 #ifndef CONFIG_ARM64
15 
16 /*
17  * Invalidate L2 Cache using co-proc instruction
18  */
19 #if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
20 void invalidate_l2_cache(void);
21 #else
22 static inline void invalidate_l2_cache(void)
23 {
24 	unsigned int val=0;
25 
26 	asm volatile("mcr p15, 1, %0, c15, c11, 0 @ invl l2 cache"
27 		: : "r" (val) : "cc");
28 	isb();
29 }
30 #endif
31 
32 int check_cache_range(unsigned long start, unsigned long stop);
33 
34 void l2_cache_enable(void);
35 void l2_cache_disable(void);
36 void set_section_dcache(int section, enum dcache_option option);
37 
38 void arm_init_before_mmu(void);
39 void arm_init_domains(void);
40 void cpu_cache_initialization(void);
41 void dram_bank_mmu_setup(int bank);
42 
43 #endif
44 
45 /*
46  * The value of the largest data cache relevant to DMA operations shall be set
47  * for us in CONFIG_SYS_CACHELINE_SIZE.  In some cases this may be a larger
48  * value than found in the L1 cache but this is OK to use in terms of
49  * alignment.
50  */
51 #define ARCH_DMA_MINALIGN	CONFIG_SYS_CACHELINE_SIZE
52 
53 #endif /* _ASM_CACHE_H */
54