1 /* 2 * (C) Copyright 2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21 #ifndef _SYS_PROTO_H_ 22 #define _SYS_PROTO_H_ 23 24 #include <asm/arch/omap.h> 25 #include <asm/io.h> 26 #include <asm/arch/clocks.h> 27 #include <asm/omap_common.h> 28 #include <asm/arch/mux_omap5.h> 29 #include <asm/arch/clocks.h> 30 31 struct omap_sysinfo { 32 char *board_string; 33 }; 34 extern const struct omap_sysinfo sysinfo; 35 36 void gpmc_init(void); 37 void watchdog_init(void); 38 u32 get_device_type(void); 39 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); 40 void set_muxconf_regs_essential(void); 41 void set_muxconf_regs_non_essential(void); 42 void sr32(void *, u32, u32, u32); 43 u32 wait_on_value(u32, u32, void *, u32); 44 void sdelay(unsigned long); 45 void omap_rev_string(void); 46 void setup_clocks_for_console(void); 47 void prcm_init(void); 48 void bypass_dpll(u32 *const base); 49 void freq_update_core(void); 50 u32 get_sys_clk_freq(void); 51 u32 omap5_ddr_clk(void); 52 void cancel_out(u32 *num, u32 *den, u32 den_limit); 53 void sdram_init(void); 54 u32 omap_sdram_size(void); 55 u32 cortex_rev(void); 56 void init_omap_revision(void); 57 void do_io_settings(void); 58 59 /* 60 * This is used to verify if the configuration header 61 * was executed by Romcode prior to control of transfer 62 * to the bootloader. SPL is responsible for saving and 63 * passing this to the u-boot. 64 */ 65 extern struct omap_boot_parameters boot_params; 66 67 static inline u32 running_from_sdram(void) 68 { 69 u32 pc; 70 asm volatile ("mov %0, pc" : "=r" (pc)); 71 return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) && 72 (pc < OMAP54XX_DRAM_ADDR_SPACE_END)); 73 } 74 75 static inline u8 uboot_loaded_by_spl(void) 76 { 77 /* 78 * u-boot can be running from sdram either because of configuration 79 * Header or by SPL. If because of CH, then the romcode sets the 80 * CHSETTINGS executed bit to true in the boot parameter structure that 81 * it passes to the bootloader.This parameter is stored in the ch_flags 82 * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a 83 * mandatory section if CH is present. 84 */ 85 if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) 86 return 0; 87 else 88 return running_from_sdram(); 89 } 90 /* 91 * The basic hardware init of OMAP(s_init()) can happen in 4 92 * different contexts: 93 * 1. SPL running from SRAM 94 * 2. U-Boot running from FLASH 95 * 3. Non-XIP U-Boot loaded to SDRAM by SPL 96 * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the 97 * Configuration Header feature 98 * 99 * This function finds this context. 100 * Defining as inline may help in compiling out unused functions in SPL 101 */ 102 static inline u32 omap_hw_init_context(void) 103 { 104 #ifdef CONFIG_SPL_BUILD 105 return OMAP_INIT_CONTEXT_SPL; 106 #else 107 if (uboot_loaded_by_spl()) 108 return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL; 109 else if (running_from_sdram()) 110 return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH; 111 else 112 return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR; 113 #endif 114 } 115 116 static inline u32 omap_revision(void) 117 { 118 extern u32 *const omap5_revision; 119 return *omap5_revision; 120 } 121 122 #endif 123